You can change your wireless network name in your router's settings, usually through a web browser or mobile app
Your wireless network name — called the SSID — is what you see when you look for WiFi networks on your phone or laptop. Changing it from the factory default (often something like "NETGEAR-5G" or "TP-Link") is one of the first security steps you should take, because default names tell attackers what router model you own and sometimes hint at the default password.
The actual process takes about five minutes. You log into your router's admin panel, find the wireless settings, type in a new name, and save. The steps vary slightly depending on your router brand, but the principle is the same across all of them.
Key Takeaways
- Access your router by typing its IP address (usually 192.168.1.1 or 192.168.0.1) into a web browser, or use your router's mobile app if it has one.
- You will need your router's admin username and password — check the sticker on the back of the router if you have not changed them yet.
- Choose a network name that does not contain your name, address, or the word "guest" — these details help attackers target you specifically.
- After you change the name, all your devices will disconnect and you will need to reconnect them using the new network name.
- Changing the network name does not affect your internet speed or connection quality, only what the network is called.
Finding your router's admin panel
Most routers have a web-based control panel you access through a browser. Open any browser on a device connected to your WiFi, then type 192.168.1.1 or 192.168.0.1 into the address bar. One of these will load your router's login page.
If neither address works, check the sticker on the back or bottom of your router — it will show the correct IP address, usually labeled "Default Gateway" or "Router Address". You can also find this by searching "[your router brand] default IP address" online.
Some newer routers (from brands like Eero, Netgear Orbi, or TP-Link) have mobile apps instead of or in addition to a web panel. If your router came with an app, that is often the easiest route — you can change the network name right from your phone without needing to remember an IP address.
Logging in with your admin credentials
When the router page loads, you will see a login screen asking for a username and password. If you have never changed these, they are the factory defaults printed on the sticker on your router. Common defaults are "admin" for both username and password, but this varies — some routers use "admin" and "password", others use different combinations.
If you changed the password before and do not remember it, you will need to reset the router to factory settings. This erases all your custom settings, so it is a last resort. Most routers have a small reset button you hold for 10 to 15 seconds while the router is powered on. After a reset, you can log in with the factory defaults again.
Once you are logged in, look for a section labeled "Wireless", "WiFi", "Network Settings", or "SSID". The exact wording depends on your router brand, but it will be somewhere in the main menu or a sidebar.
Changing the network name itself
In the wireless settings section, you will see a field with your current network name. Delete the existing name and type in a new one. Choose something you will recognize but that does not reveal personal information — avoid your last name, your street name, "Guest WiFi", or anything that identifies your location or device type.
A good network name is something like "Brightside" or "Northstar" — memorable to you, meaningless to someone outside your home. Avoid special characters or spaces if the router allows them, because some devices have trouble connecting to networks with unusual characters in the name.
If your router broadcasts both 2.4 GHz and 5 GHz bands, you may see two separate SSID fields — one for each band. You can give them the same name or different names. Most people use the same name so devices automatically pick the best band, but some prefer to name them differently (like "Network-2.4" and "Network-5") to control which band each device uses.
Saving your changes and reconnecting devices
After you type the new name, look for a "Save", "explore", or "OK" button. Click it and wait for the router to restart — this usually takes 30 seconds to a minute. During this time, your internet will drop briefly and your WiFi network will disappear from the list of available networks.
Once the router restarts, the new network name will appear in your list of available WiFi networks. On each device you use — phone, laptop, tablet, smart TV — you will need to "forget" the old network name and reconnect using the new one. Go to your WiFi settings, select the new network name, and enter your WiFi password (the same password you used before, unless you also changed that).
Devices that connect automatically (like smart home devices) may take a few minutes to reconnect on their own. If a device does not reconnect within five minutes, manually reconnect it through that device's WiFi settings.
What to do if you also want to change your WiFi password
While you are in the wireless settings, you can also change your WiFi password — the thing you type when connecting a new device. This is separate from your admin password (the one you used to log into the router). Look for a field labeled "Passphrase", "Password", "Pre-Shared Key", or "WPA2 Password".
Change it to something at least 12 characters long, using a mix of uppercase, lowercase, numbers, and symbols if possible. Write it down somewhere safe — you will need it every time you connect a new device. After you save this change, all your currently connected devices will stay connected, but new devices will need the new password to join.
If you change both the network name and the password at the same time, reconnecting devices is the same process: forget the old network, find the new name in your list, and enter the new password.
Troubleshooting if something goes wrong
If you change the network name but your devices cannot find it, the router may still be restarting. Wait another minute and refresh your WiFi network list. If the new name still does not appear, try restarting the router by unplugging it for 30 seconds, then plugging it back in.
If you get locked out of the admin panel because you changed the admin password and forgot it, you will need to reset the router to factory settings using the reset button. This will erase your network name change and any other settings you customized, so you will need to set everything up again from the beginning.
If a device will not reconnect even after you enter the correct new network name and password, try "forgetting" the network on that device and reconnecting. On most phones and laptops, this is in the WiFi settings under "Manage Networks" or "Known Networks". Delete the old network entry, then reconnect to the new name.
Frequently Asked Questions
Will changing my network name affect my internet speed?
No. The network name is just a label — it does not affect how fast your internet runs or how your devices communicate with the router. Speed depends on your internet plan, router hardware, and how far devices are from the router.
Can I change my network name without logging into the router?
No. The network name is stored in the router's settings, so you must access the admin panel to change it. There is no way to do it from a connected device without logging in.
What if I have a mesh WiFi system instead of a single router?
Mesh systems (like Eero, Netgear Orbi, or Google Nest) usually have a mobile app that is easier to use than a web panel. Open the app, look for "WiFi Settings" or "Network Settings", and change the network name there. The process is the same, but you do it through the app instead of a browser.
Do I need to change my network name if I live in an apartment building?
Yes. Even in an apartment, changing the default name is worth doing. It removes a signal that tells attackers what router model you own, which is useful information for finding known security weaknesses. It also makes your network less obvious to casual network browsers.
What happens to devices that are already connected when I change the network name?
They will disconnect when ready when the router restarts. You will need to manually reconnect each one by selecting the new network name and entering your WiFi password again. Devices will not automatically switch to the new name on their own.