Change your WiFi password through your router's admin panel

Your router has a built-in control page where you can change the password people use to connect to your network. You reach it by typing your router's IP address into a web browser on any device already connected to your WiFi. The most common address is 192.168.1.1 or 192.168.0.1 — if neither works, check the sticker on the back or bottom of your router, which usually lists the address and your default login username and password.

Once you log in with those default credentials, look for a section called "Wireless Settings," "WiFi Settings," or "Security." The exact name and location depend on your router brand — Netgear, TP-Link, Linksys, and others arrange their menus differently. The password field is sometimes labeled "Passphrase" or "Pre-Shared Key." Change it to something you will remember, save the settings, and your router will restart. All devices will disconnect and need the new password to reconnect.

Key Takeaways

  • Access your router's control page by typing 192.168.1.1 or 192.168.0.1 into a web browser, then log in with the default username and password printed on your router.
  • Find the wireless or WiFi settings section and change the password field (sometimes called "Passphrase" or "Pre-Shared Key") to a new password you can remember.
  • Save your changes and wait for the router to restart — all connected devices will disconnect and must reconnect with the new password.
  • Write down your new password or store it in a password manager so you do not forget it when reconnecting devices.

Finding your router's control page address

If 192.168.1.1 and 192.168.0.1 do not work, your router uses a different address. The easiest way to find it is to look at the physical router itself — the sticker on the back or bottom usually shows the address, often labeled "IP Address," "Admin URL," or "Gateway." It might look like 192.168.100.1 or 10.0.0.1, depending on the brand.

If you cannot find the sticker, you can look it up on your computer. On Windows, open Command Prompt and type ipconfig, then look for the line that says "Default Gateway" — that number is your router's address. On a Mac, open System Preferences, go to Network, select your WiFi connection, and click Advanced. The router address appears under the TCP/IP tab as "Router."

Logging in with your default credentials

The first time you access your router's control page, you will need the default username and password. These are printed on the sticker on your router and are not the same as your WiFi password — they are credentials for managing the router itself. Common defaults are "admin" for both username and password, or "admin" with a blank password, but this varies by brand.

If you have already changed these credentials and forgotten them, you will need to reset the router to factory settings. Most routers have a small reset button on the back that you hold down for 10 to 15 seconds while the router is powered on. This erases all your settings, including your WiFi password, so you will need to set everything up again from scratch. Check your router's manual for the exact reset procedure, as some models require a different approach.

Choosing a strong new password

A strong WiFi password is at least 12 characters long and mixes uppercase letters, lowercase letters, numbers, and symbols. Avoid using your name, address, phone number, or anything that appears on the router itself. A password like "BlueSky#Mountain47" is much harder to guess than "password123" or "MyHome2024."

If you use a password manager like Bitwarden, 1Password, or the password manager built into your browser, store your new WiFi password there so you can look it up when you need to reconnect a device. This is especially helpful if you have guests who need the password — you can show them the stored password without having to remember it yourself.

Reconnecting your devices after the change

When you save your new password, the router will restart and all your connected devices will disconnect. You will need to reconnect each one manually. On phones and tablets, go to WiFi settings, select your network name, and enter the new password. On computers, do the same — open your WiFi menu, find your network, and type in the new credentials.

Smart home devices like security cameras, smart speakers, or connected thermostats may take longer to reconnect or may require you to remove and re-add them in their apps. If a device will not reconnect after you have entered the password correctly, restart the device itself — turn it off, wait 10 seconds, and turn it back on. If it still will not connect, check whether the device supports the WiFi frequency your router is broadcasting (2.4 GHz or 5 GHz) by looking at the device manual or the router's wireless settings.

What to do if you forget the new password

If you change your password and then forget it before writing it down, you can log back into the router's control panel and view or change it again. Use the same IP address and default credentials you used the first time. The password you set is visible in the wireless settings, though it may be hidden behind dots or asterisks — some routers have a "Show Password" checkbox you can click to reveal it.

If you have forgotten both your WiFi password and your router's default login credentials, the only option is to reset the router to factory settings using the reset button. This will erase your WiFi password, your network name, and any other custom settings you have made, so you will need to set up the network again from the beginning.

Changing the password on a mesh WiFi system

If you use a mesh WiFi system like Eero, Netgear Orbi, or TP-Link Deco instead of a single router, the process is different. These systems usually have a mobile app where you log in and change the password from a menu — you do not access a control page in a web browser. Open the app, look for "WiFi Settings" or "Network Settings," and find the password field. The app will handle restarting the system and reconnecting your devices.

Some mesh systems still allow you to access the main node's control page through a web browser, but the app is usually faster and more reliable. Check the documentation that came with your system or the manufacturer's website to see whether your model uses an app or a web interface.

Frequently Asked Questions

Will changing my WiFi password disconnect my devices permanently?

No. Your devices will disconnect when the router restarts, but they will reconnect as soon as you enter the new password. You do not lose any files or settings on the devices themselves — they just need the new password to access the network again.

Can I change my WiFi password from my phone instead of a computer?

Yes, if your phone is connected to the WiFi. Open a web browser, type your router's IP address (usually 192.168.1.1), log in with your default credentials, and follow the same steps. The process is identical on phones and computers.

What if my router does not have a sticker with the default password?

Check the manual that came with the router, or search the router model number online — most manufacturers publish the default credentials on their support pages. If you still cannot find it, you will need to reset the router to factory settings using the reset button.

Do I need to change my WiFi password regularly?

Changing it once a year or whenever someone moves out is reasonable. If you suspect someone has your password or you notice unfamiliar devices on your network, change it when ready. Regular changes are less critical if your password is strong and you do not share it widely.

What is the difference between my WiFi password and my router login password?

Your WiFi password is what guests and your devices use to connect to the internet. Your router login password protects access to the control panel where you manage settings. They are separate — changing one does not affect the other, though you can change both if you want.