Why you might want to change your IP address

Your IP address is how your device identifies itself on a network — it's the digital equivalent of a mailing address. Changing it is straightforward, and there are several practical reasons to do it: you're troubleshooting a connection problem, you want to reset your network after a security incident, you're moving to a different location, or you straightforward want a fresh start on your home network.

The method depends on whether you want to change the address your router assigns to one device, or reset the address your internet service provider assigns to your entire household. Both are doable without technical informed.

Key Takeaways

  • Your router assigns a local IP address to each device on your home network, and you can change this address in your device's network settings without touching your router.
  • Your internet service provider assigns a public IP address to your home, and the easiest way to change it is to unplug your modem for 10 to 30 minutes, then plug it back in.
  • On Windows, you change your local IP in Settings > Network & Internet > Advanced Network Settings > IP Settings; on Mac, it's System Settings > Network > Wi-Fi > Details > TCP/IP.
  • On phones and tablets, you can request a new local IP by "forgetting" the Wi-Fi network and reconnecting, which tells your router to assign a fresh address.
  • If you set a static IP address manually, your device will keep that address even after a restart, so write down what you chose in case you need to change it back.

Changing your local IP address on Windows

Your local IP address is the one your router gives to your computer — it looks like 192.168.1.100 or 10.0.0.50. To change it on Windows 11 or Windows 10, open Settings and go to Network & Internet. Click on Advanced Network Settings, then scroll down and select IP Settings.

You'll see two options: DHCP (automatic) or static (manual). If you're on DHCP, your router assigns a new address each time you restart. To change your address right now, switch to static, enter a new address in the same range as your router (usually 192.168.1.x or 10.0.0.x, where x is a number between 2 and 254), and click Save. Your device will disconnect and reconnect with the new address.

If you want to go back to automatic assignment, switch back to DHCP. Write down any static address you set, because you'll need it if you want to change it again later.

Changing your local IP address on Mac

On macOS, open System Settings and click Network. Select your Wi-Fi network from the list on the left, then click Details. Go to the TCP/IP tab at the top.

You'll see a dropdown that says "Configure IPv4" — it's probably set to "Using DHCP". To change your address, click that dropdown and select "Manually". Enter a new IP address in the same range as your router, then click OK. Your Mac will disconnect and reconnect with the new address.

To return to automatic assignment, go back to the same menu and set "Configure IPv4" back to "Using DHCP".

Changing your local IP address on phones and tablets

Most phones and tablets don't have a straightforward menu to set a static IP address the way computers do. Instead, you can request a fresh local IP from your router by forgetting the network and reconnecting.

On iPhone or iPad, go to Settings > Wi-Fi, tap the network you're connected to, and select "Forget This Network". Then reconnect by tapping the same network name and entering your password. Your router will assign a new local IP address.

On Android, go to Settings > Network & Internet > Wi-Fi, long-press the network name, and tap "Forget". Reconnect the same way. Some Android phones also have an option to set a static IP in the Advanced settings for that network, but this varies by manufacturer.

Changing your public IP address from your internet service provider

Your public IP address is the one your internet service provider assigns to your modem — it's what websites see when you visit them. To change it, unplug your modem from power, wait 10 to 30 minutes, and plug it back in. Your ISP will usually assign a new address during the restart.

The wait time matters because your ISP's system needs time to forget the old address before it will hand out a new one. If you plug it back in when ready, you'll often get the same address back.

If you've unplugged it for the full time and still have the same public IP, you can check by visiting a site like whatismyipaddress.com before and after the restart. Some ISPs assign addresses for longer periods or require you to contact them to force a change, but the modem restart works for most home connections.

When to use static versus automatic IP addresses

Automatic (DHCP) is the right choice for most people most of the time. Your router handles everything, and you don't have to remember anything. Use automatic unless you have a specific reason not to.

Set a static IP address if you're running a home server, setting up a security camera that needs a fixed address, or troubleshooting a connection problem that requires a specific address. Once you set it, write it down somewhere safe — in a note on your phone, a document on your computer, or even a sticky note. If something goes wrong and you need to change it back, you'll need to know what you set it to.

What to do if you can't connect after changing your IP

If you set a static IP address and now your device won't connect to the internet, the address you chose is probably outside your router's range or conflicts with another device. Go back to the same menu and switch to automatic (DHCP). Your device will reconnect when ready.

If you changed your public IP by restarting your modem and now nothing connects, wait a few minutes — the modem needs time to fully restart and get a new address from your ISP. If it's been more than five minutes and you still have no connection, unplug the modem again, wait another 10 minutes, and plug it back in.

Frequently Asked Questions

Will changing my IP address affect my passwords or accounts?

No. Your IP address is just how your device talks to the network — it has nothing to do with your passwords, accounts, or login information. You'll stay logged into everything you were logged into before.

Can I pick any IP address I want?

For your local IP (the one your router assigns), you need to pick a number in the same range as your router — usually 192.168.1.x or 10.0.0.x. For your public IP (the one from your ISP), you can't pick it at all; your ISP assigns it. You can only force a change by restarting your modem.

How do I know what IP address range my router uses?

On Windows, open Command Prompt and type ipconfig, then look for "Default Gateway" — that's your router's address, and your local IPs should be in the same range. On Mac, open Terminal and type ifconfig, then look for "inet" under your Wi-Fi connection.

Will I need to change my IP address often?

No. Most people never need to change their local IP address — your router handles it automatically. You might change your public IP once or twice if you're troubleshooting a security issue, but it's not something you do regularly.

What's the difference between IPv4 and IPv6?

IPv4 addresses look like 192.168.1.100 (four numbers separated by dots). IPv6 addresses look like 2001:0db8:85a3::8a2e:0370:7334 (letters and numbers with colons). Most home networks still use IPv4, but some newer routers support both. You can usually ignore this unless your router specifically asks which one you want.