The fastest way in: use the default address and credentials
Open any web browser and type routerlogin.net into the address bar. This takes you to your Netgear router's login page. If that does not work, try 192.168.1.1 instead — both addresses point to the same place on most Netgear models.
The default username is admin and the default password is password. Enter both and click Log In. You are now inside your router's settings, where you can change your WiFi name, password, and security settings.
If neither address loads, your router may not be connected to power, or your computer may not be connected to the network. Restart the router by unplugging it for 30 seconds, plugging it back in, and waiting two minutes for it to fully boot. Then try again.
Key Takeaways
- Go to routerlogin.net or 192.168.1.1 in your browser, then log in with username admin and password password.
- Change the default password when ready after your first login — this is the single most important security step you can take.
- If you cannot remember the new password you set, you can reset the router to factory defaults by holding the reset button for 10 seconds, but this erases all your custom settings.
- Write down your new router password and store it somewhere safe, separate from where you store other passwords.
Why you must change the default password right away
Every Netgear router ships with the same default credentials. Anyone on your WiFi network — a guest, a neighbor with a strong signal, or someone parked outside — can type routerlogin.net into their browser and log in using admin and password. Once inside, they can change your WiFi password, redirect your internet traffic, or access files on devices connected to your network.
Changing the default password is not optional security theater. It is the difference between a router anyone can control and one only you can access. Do this before you do anything else with your router.
How to change your router password after first login
After you log in with the default credentials, look for a section called Administration, Advanced, or System Settings — the exact name varies by Netgear model. Inside that section, find Set Password or Change Password.
You will see two fields: one for the current password (which is still password) and one for the new password. Type a password that is at least 12 characters long and includes uppercase letters, lowercase letters, numbers, and symbols. Something like BlueMoon#2847$Kitchen is stronger than netgear123.
Write this new password down on paper and store it in a drawer or safe — not in a note on your phone or computer, where a breach could expose it. You will need it if you ever need to log back in to change settings.
What to do if you forgot your router password
If you cannot remember the password you set, you have one option: reset the router to factory defaults. Find the small reset button on the back or bottom of the router. Use a paperclip or pen to press and hold it for 10 seconds while the router is powered on. The lights will flash and the router will restart.
After the reset, the router will be back to the default username admin and password password. You can log in again and set a new password. However, this also erases any custom settings you made — your WiFi name, WiFi password, port forwarding rules, or anything else you configured.
This is why writing down your new password is important. A reset is recoverable but inconvenient.
Logging in from a different device or network
You can only log in to your router from a device that is connected to your WiFi network or plugged into the router with an ethernet cable. You cannot log in from your phone's cellular data, from a coffee shop WiFi, or from anywhere else.
If you are on your home WiFi and routerlogin.net does not load, make sure you are connected to your own network, not a neighbor's. Check the WiFi name in your device's network list. If you are connected to the right network and the page still will not load, restart your device and try again.
Different Netgear models and where to find settings
Netgear makes many router models — Nighthawk, Orbi, Powerline, and others — and the layout of the settings page varies slightly between them. The login process is always the same (routerlogin.net or 192.168.1.1), but the location of the password change option may be under Administration, Advanced, System Settings, or Router Settings depending on your model.
If you cannot find where to change the password, look for a manual or support page for your specific model number. You can find the model number on a sticker on the bottom or back of the router. Searching "[your model number] change password" usually brings up the exact steps.
Keeping your router find after login
Once you are logged in and have changed the password, there are two other settings worth checking. First, look for WiFi Security or Wireless Security and make sure it is set to WPA3 or WPA2 — not WEP or an older standard. This encrypts the data traveling between your devices and the router.
Second, find the WiFi Password or Network Key setting and change it from the default if you have not already. This is different from your router login password — it is the password people use to connect to your WiFi. Make it at least 12 characters and use a mix of letters, numbers, and symbols.
Frequently Asked Questions
What if I type routerlogin.net and nothing happens?
Make sure you are connected to your Netgear WiFi network, not a different one. If you are connected and the page still will not load, try typing 192.168.1.1 instead. If that also fails, restart your router by unplugging it for 30 seconds and plugging it back in. Wait two minutes for it to fully start, then try again.
Can I log in to my router from my phone?
Yes, as long as your phone is connected to your WiFi network. Open any browser, go to routerlogin.net or 192.168.1.1, and log in the same way you would on a computer. You cannot log in using cellular data — you must be on your home WiFi.
Is it safe to use the same password for my router and my WiFi?
No. Your router login password controls access to all your network settings. Your WiFi password is what guests use to connect. If someone guesses your WiFi password, they should not also have access to change your router settings. Use two different strong passwords.
What happens if someone else logs into my router?
They can change your WiFi password and lock you out, redirect your internet traffic to steal data, or access files on devices connected to your network. This is why changing the default password when ready is critical. If you suspect someone has logged in, reset the router to factory defaults and set a new password.
Do I need to log in to my router regularly?
No. Once you have set a strong password and configured your WiFi settings, you rarely need to log back in. You might log in again if you want to change your WiFi name, add a guest network, or troubleshoot a connection problem. Most people log in once or twice a year at most.