Finding your IP address on a Nord device
Your IP address is a number assigned to your device so other devices on your network can find and communicate with it. On a Nord device — whether that's a Nord router, Nord modem, or Nord-branded networking equipment — you can find this address in a few places depending on what you're trying to do. Most people need either the address their device was given by their internet provider (the WAN or external address) or the address it uses inside their home network (the LAN or internal address).
The fastest way is usually to log into your Nord device's admin panel through a web browser. Open any browser, type 192.168.1.1 or 192.168.0.1 into the address bar, and press Enter. You'll be asked for a username and password — these are often printed on the back or bottom of your Nord device, or in the paperwork that came with it. Once you're logged in, look for a section called "Status," "System," "Device Information," or "Network" — the exact name varies by Nord model. Your WAN address (the one your internet provider gave you) and your LAN address (the one your device uses at home) will both be listed there.
Key Takeaways
- Your Nord device has two IP addresses: a WAN address from your internet provider and a LAN address for your home network, and you need to know which one you're looking for.
- The admin panel at 192.168.1.1 or 192.168.0.1 shows both addresses under a Status or System section, and you log in with credentials printed on the device itself.
- If you can't remember the admin password, you can reset your Nord device to factory settings, though this erases any custom settings you've made.
- Your WAN address changes periodically unless your internet provider has given you a static IP, while your LAN address stays the same until you change it manually.
Accessing the admin panel on your Nord device
The admin panel is the control center for your Nord device, and it's where you'll find the most complete information about your IP addresses. Start by making sure you're connected to your Nord network — either by Wi-Fi or by plugging an ethernet cable directly into the device. Open a web browser (Chrome, Firefox, Safari, or Edge all work) and type the address into the address bar. The two most common addresses are 192.168.1.1 and 192.168.0.1, but if neither of those works, check the back of your Nord device or its manual for the correct one.
When the login page appears, you'll need your username and password. These are usually printed on a sticker on the device itself — look for "Admin" or "Username" and a corresponding password. If you've changed these credentials since you set up the device and can't remember them, you'll need to reset the device. Most Nord devices have a small reset button on the back that you hold down for 10 to 15 seconds while the device is powered on. This returns everything to factory settings, so you'll need to set up your network again, but it will let you log back in with the default credentials.
Where to find your WAN address
Your WAN address (Wide Area Network address) is the IP address your internet provider assigned to your Nord device. This is the address that identifies your home on the internet, and it's what websites and online services see when you connect to them. Once you're logged into the admin panel, navigate to the Status page or System Information section — the exact location depends on your Nord model, but it's usually one of the first tabs or menu items you see.
On the Status page, look for a field labeled "WAN IP Address," "External IP," "Internet IP," or "Public IP Address." This is the number you're looking for. Write it down or take a screenshot if you need to reference it later. Keep in mind that this address changes periodically — your internet provider reassigns it every few days or weeks unless you've paid for a static IP address, which stays the same indefinitely. If you're troubleshooting a connection problem or setting up port forwarding, this is the address you'll need to use.
Where to find your LAN address
Your LAN address (Local Area Network address) is the IP address your Nord device uses inside your home network. This is different from your WAN address — it's the address other devices on your home Wi-Fi or ethernet network use to communicate with your Nord device. You'll find this on the same Status or System Information page where you found your WAN address, usually listed as "LAN IP Address," "Local IP," "Device IP," or "Gateway Address."
This address almost never changes unless you manually configure it. It's typically something like 192.168.1.1 or 192.168.0.1 — the same address you used to log into the admin panel in the first place. If you need to change it for some reason (usually because of a conflict with another device on your network), you can do that in the Network Settings or LAN Settings section of the admin panel, but most people never need to touch it. This is the address you'd give to a technician if they're troubleshooting your home network remotely.
Finding your IP address without the admin panel
If you can't access the admin panel for some reason, you can still find your Nord device's LAN address by checking your other devices. On a Windows computer connected to the same network, open the Command Prompt (search for "cmd" in the Start menu) and type ipconfig, then press Enter. Look for a section labeled "Default Gateway" — that's your Nord device's LAN address. On a Mac, open Terminal (search for "Terminal" in Spotlight) and type netstat -nr | grep default, then press Enter. The address in the first column is your gateway.
Finding your WAN address without the admin panel is trickier. You can visit a website like whatismyipaddress.com from any device on your network, and it will show you your WAN address. However, this method only works if your internet connection is working. If you're troubleshooting a connection problem and can't get online, you'll need to access the admin panel or contact your internet provider to find out your WAN address.
What to do if you can't find your IP address
If you've tried logging into the admin panel and it's not working, the first thing to check is whether you're using the correct address. The two most common defaults are 192.168.1.1 and 192.168.0.1, but some Nord models use different addresses. Check the back of your device, the manual, or the box it came in — the correct address should be printed somewhere. If you still can't find it, try searching online for "Nord [your model number] default gateway" — this usually brings up the right address quickly.
If you're using the correct address but the login page won't load, make sure you're connected to your Nord network and that the device is powered on. Try restarting your Nord device by unplugging it for 30 seconds, then plugging it back in. If the admin panel still won't load after that, you may need to reset the device to factory settings using the reset button on the back. Remember that this will erase any custom settings you've made, so only do this as a last resort.
Understanding static versus dynamic IP addresses
Your WAN address is usually dynamic, which means your internet provider reassigns it periodically. This happens automatically in the background and you don't need to do anything about it. Most home internet plans come with dynamic addresses because there aren't enough IP addresses for every device to have a permanent one. Your address might change every few days, every few weeks, or even less frequently — it depends on your provider's settings.
If you need your WAN address to stay the same (for example, if you're running a server or setting up remote access to your home network), you can contact your internet provider and request a static IP address. This usually costs extra per month, but it guarantees your address won't change. Your LAN address, by contrast, is always static unless you manually change it. It stays the same every time you restart your Nord device, which is why you can always use 192.168.1.1 or 192.168.0.1 to log back into the admin panel.
Frequently Asked Questions
Why do I need to know my IP address?
You might need it for troubleshooting network problems, setting up port forwarding to access devices remotely, or giving technical support to someone helping you fix your network. Your WAN address is what websites see, while your LAN address is what devices inside your home use to talk to your Nord device.
Is my IP address the same as my MAC address?
No. Your IP address is a number that identifies your device on a network, while your MAC address is a unique identifier built into your device's hardware. Both appear in the admin panel, but they serve different purposes. Your MAC address never changes, while your WAN IP address changes periodically.
Can someone use my IP address to hack my home network?
Your WAN address is visible to anyone on the internet, but it doesn't directly give them access to your network. Your Nord device has a firewall that blocks unauthorized connections by default. However, you should still keep your admin panel password strong and change it from the default if you haven't already.
What should I do if my WAN address keeps changing?
This is normal behavior for dynamic IP addresses. If the frequent changes are causing problems with remote access or port forwarding, contact your internet provider about upgrading to a static IP address. Otherwise, there's nothing you need to do — the changes happen automatically.