The /24 tells your devices which part of an IP address identifies your network
When you see an IP address written as 192.168.1.0/24, the /24 is a shorthand that says "the first 24 bits of this address are the network, and the remaining 8 bits are for individual devices." It is a way to draw a line through an IP address and tell your router and devices which computers belong together on the same network.
Without this notation, your devices would not know whether another computer on your network is actually on your network or somewhere else on the internet. The /24 solves that problem in a single number instead of requiring a separate, longer piece of information.
Key Takeaways
- The /24 notation means the first 24 bits of the IP address identify your network, leaving 8 bits for individual device addresses.
- A /24 network can hold up to 254 usable device addresses, which is why most home routers use this size.
- Your router automatically assigns /24 to your home network unless you manually change it, and you rarely need to.
- The /24 is called a subnet mask, and it works the same way whether your network is at home, in an office, or in a data center.
How the bits break down in a /24 network
An IP address has 32 bits total. When you write /24, you are saying 24 of those bits belong to the network address and 8 belong to the host (the individual device). In the address 192.168.1.0/24, the network part is 192.168.1, and the host part is the last number, which can range from 1 to 254.
Think of it like a postal address. The network part is your street and city — it tells the mail carrier which neighborhood to go to. The host part is your house number — it tells them which house on that street. Every device on your 192.168.1.0/24 network has the same first three numbers (192.168.1) and a different fourth number.
The reason you get 254 usable addresses instead of 256 is that two addresses are reserved: 192.168.1.0 is the network address itself, and 192.168.1.255 is the broadcast address used to send a message to all devices at once. Your devices use the addresses in between.
Why /24 is the standard for home networks
Your home router almost certainly uses /24 because it is large enough for a typical household and small enough to be efficient. Most homes have fewer than 254 devices, so /24 wastes no space. It is also the easiest size for a router to manage — the math is straightforward, and the router firmware is built around it.
If you have a very large home network with more than 254 devices, you would need a smaller subnet mask like /23 or /22, which would give you more addresses. If you wanted to isolate devices into separate networks, you might use /25 or /26, which would give you fewer addresses per network but let you create multiple networks. Most people never change this setting.
How your router uses /24 to decide what is local
When your phone sends data to another device, your router uses the /24 to decide whether that device is on your home network or somewhere else. If your phone is 192.168.1.50 and it wants to send data to 192.168.1.100, the router sees that both addresses start with 192.168.1 and knows they are on the same network, so it sends the data directly between them.
If your phone tries to send data to 8.8.8.8 (Google's public DNS), the router sees that 8.8.8.8 does not start with 192.168.1, so it knows that address is not on your home network. The router then sends the data out to the internet instead. Without the /24, your router would not know how to make this decision.
The /24 is also called a subnet mask
The /24 notation is called CIDR notation, and it is a modern, compact way to write a subnet mask. The older way to write the same thing is 255.255.255.0, which is the subnet mask. Both mean exactly the same thing — they both say "the first 24 bits are the network."
You may see both notations in your router settings or in documentation. If you see 255.255.255.0, that is a /24. If you see 255.255.254.0, that is a /23. The CIDR notation (/24) is shorter and easier to read, so it has become more common in recent years, but routers still often display the older format.
Other common subnet masks and what they mean
A /32 means only one device — it is used for a single computer or server. A /16 means the first 16 bits are the network, leaving 16 bits for devices, which gives you 65,534 usable addresses. A /8 is used by very large organizations and gives you millions of addresses. Most home networks are /24, most small office networks are /24 or /16, and large corporate networks often use /16 or smaller.
The smaller the number after the slash, the more devices the network can hold. The larger the number, the fewer devices. Your home router defaults to /24 because that balance works for almost every home setup.
When you might need to change your /24
If you are setting up a home network from scratch and you have fewer than 254 devices, you do not need to change the /24. If you are connecting your home network to a business network or a VPN, you may need to use a different subnet mask to avoid conflicts — for example, if the business network also uses 192.168.1.0/24, you would need to change your home network to something like 192.168.2.0/24 or use a different subnet mask entirely.
If you are troubleshooting a network problem and you suspect devices are not finding each other, checking that all devices are on the same /24 is a good first step. If one device is set to /25 and another is set to /24, they will not see each other as local even if their IP addresses look similar.
Frequently Asked Questions
What does /24 mean in plain English?
The /24 tells your router and devices that the first 24 bits of the IP address identify which network a device belongs to, and the last 8 bits identify the individual device. It is a way to group devices together so they know how to talk to each other directly.
Can I use a different subnet mask like /25 or /23 at home?
Yes, you can change it in your router settings, but you rarely need to. A /25 gives you 126 usable addresses per network, and a /23 gives you 510. Most homes use /24 because it is the right size and is the default on almost every router.
If I change my /24 to /25, will my devices stop working?
Not when ready, but devices that were assigned addresses under the old /24 may not communicate with each other until they get new addresses under the new /25. It is safest to change the subnet mask, restart your router, and let all devices reconnect and get new addresses.
Is /24 the same as 255.255.255.0?
Yes, they are two ways of writing the same thing. /24 is newer and shorter (CIDR notation), and 255.255.255.0 is the older format (subnet mask). Your router may display either one, but they mean the same thing.
Why does my router use 192.168.1.0/24 and not something else?
192.168.1.0/24 is a private IP range reserved for home and office networks, so it will never conflict with public internet addresses. Your router uses it by default because it is safe, widely recognized, and gives you plenty of addresses for a typical home.