What actually slows down your internet, and what you can fix
Your internet speed depends on three things: the connection your provider sends to your house, the equipment that receives it, and what is happening on your network right now. You cannot change what your provider sends without paying more or switching providers. But you can almost always improve the other two, and the fixes are free or cheap.
Most slow internet comes from one of four sources: your router is too far away or blocked by walls, too many devices are using the network at once, your router is old and cannot handle modern speeds, or background programs are eating bandwidth without you knowing. Start by checking which one is your problem, because the fix changes based on the cause.
Key Takeaways
- Move your router to the center of your home, away from walls and metal objects, to reach more devices at full speed.
- Restart your router by unplugging it for 30 seconds, which clears its memory and often fixes slow speeds when ready.
- Check what devices are connected and using bandwidth — streaming, downloads, and video calls drain speed from everything else on the network.
- Update your router's firmware through its settings page, which patches slowness bugs and improves performance with newer devices.
- If your router is more than five years old, replacing it may be cheaper than troubleshooting, since older models cannot handle current speeds.
Restart your router the right way
Restarting your router clears its memory and resets its connection to your internet provider. This fixes slow speeds about half the time, costs nothing, and takes two minutes. Unplug the power cable from the back of the router, wait 30 seconds, then plug it back in. Wait another two minutes for it to fully restart — you will see lights blink and then settle.
Do not use the reset button on the router unless you want to erase all your settings. The power cable method is what you want. After the restart, run a speed test on your phone or computer to see if anything changed. If your speed jumped back to normal, you are done. If it is still slow, move to the next step.
Move your router to a better location
Walls, metal, and distance kill WiFi signal. Your router broadcasts in all directions, but walls and metal objects block or weaken that signal. If your router sits in a back corner, in a closet, or behind a filing cabinet, devices in other rooms get a weak signal and slow down.
Move your router to the center of your home, as high up as you can — on a shelf or mounted on a wall rather than on the floor. Keep it away from the microwave, metal shelving, and thick walls. If your home is long and narrow, put the router in the middle rather than at one end. Test your speed from the room where you use the internet most. If you are still slow, the problem is probably not the router location.
Check what is using your bandwidth right now
One device streaming video, downloading a large file, or running a backup can slow everything else to a crawl. Before you assume your internet is broken, check what is actually running.
On Windows, open the Task Manager (press Ctrl+Shift+Esc), click the Performance tab, then click Open Resource Monitor. Look at the Network section and see which programs are sending or receiving data. On Mac, open Activity Monitor (search for it in Spotlight), click the Network tab, and look at the Sent and Received columns. Close any program using a lot of bandwidth — especially cloud backups, Windows updates, or streaming services running in the background.
On your phone or tablet, go to Settings and look for Data Usage or Network Usage. Some phones show which apps used the most data in the last 24 hours. If one app is using far more than the others, that is your culprit. Close it or uninstall it if you do not use it.
Update your router's firmware
Your router runs software called firmware, just like your phone runs iOS or Android. Manufacturers release updates that fix bugs, patch security holes, and improve speed. Most routers check for updates automatically, but many people never actually install them.
Open a web browser and go to 192.168.1.1 or 192.168.0.1 (one of these is usually your router's address). Log in with the username and password on the back of your router — if you changed it and forgot it, you will need to reset the router. Look for a Settings, Administration, or System menu. Find the Firmware or Software Update option. If an update is available, install it and wait for the router to restart. This usually takes five to ten minutes.
If you do not see an update available, check the manufacturer's website. Search for your router model number (printed on the bottom) and look for a Downloads or Support page. Some routers require you to read the firmware file and upload it manually through the settings page.
Reduce the number of devices on your network
Every device connected to your WiFi shares the same bandwidth. A home with ten devices connected uses the same total speed as a home with two devices, split among ten instead of two. If you have smart home devices, security cameras, tablets, phones, computers, and streaming devices all connected, they are competing for speed.
Disconnect devices you are not using right now. Turn off WiFi on your phone if you are not using it. Unplug smart home devices that are not essential. If you have a guest network option in your router settings, use it for visitors instead of giving them your main network password — guest networks use separate bandwidth and do not slow down your main devices.
If you have many devices and cannot disconnect them, the problem is that your internet plan or router cannot handle the load. In that case, upgrading your plan or router is the real fix.
Check for interference from other WiFi networks
WiFi uses radio channels, and if your neighbors' routers are on the same channel as yours, they interfere with each other. This is especially common in apartments or dense neighborhoods.
read a free WiFi analyzer app like WiFi Analyzer (Android) or iStumbler (Mac). Open it and look at which channels nearby networks are using. Your router probably defaults to Channel 1, 6, or 11 on the 2.4 GHz band — these are the standard channels. If many neighbors are on the same channel, log into your router settings and switch to a less crowded channel. If you have a newer router that supports 5 GHz WiFi, use that instead — it has more channels and less interference, though it does not travel as far through walls.
Consider upgrading your router if it is old
Routers older than five years often cannot handle modern speeds or devices. If you have done all the steps above and your speed is still far below what your provider promises, your router may be the limit.
Check your router's age by looking at the label on the back. If it is from 2019 or earlier, it probably supports older WiFi standards that are slower than what your provider sends. A new router that supports WiFi 6 (also called 802.11ax) costs between $100 and $300 and will handle speeds up to 1 gigabit per second. If your internet plan is slower than 300 megabits per second, a cheaper WiFi 5 router (802.11ac) is fine.
Before you buy, check what speed your provider actually sends to your house. Run a speed test while connected to your router with an ethernet cable — this shows your true internet speed without WiFi interference. If that speed is much lower than what you pay for, the problem is your provider or the line to your house, not your router. Call your provider and ask them to check the line.
Frequently Asked Questions
Should I use WiFi or plug in with an ethernet cable?
Ethernet is always faster and more stable if you can reach your router with a cable. Use ethernet for devices that stay in one place — computers, gaming consoles, streaming boxes. Use WiFi for phones, tablets, and laptops you move around. If you need WiFi but want more speed, move closer to the router or move the router closer to where you sit.
Does restarting my router erase my passwords or settings?
No. Unplugging the power cable and plugging it back in restarts the router but keeps all your settings and passwords. The only way to erase everything is to press and hold the reset button on the back for 10 seconds. Never do this unless you want to start over from scratch.
Why is my speed fast on my phone but slow on my computer?
Your phone and computer may be in different locations relative to the router, or one may be on a different WiFi band. Move both devices to the same spot and test again. If the phone is still faster, your computer may have a slower WiFi card. If the computer is plugged in with ethernet, it should be much faster than the phone — if it is not, the problem is your internet provider, not your equipment.
How often should I restart my router?
Restart it only when your speed is slow. You do not need to restart it on a schedule. If you find yourself restarting it more than once a week to fix slowness, your router may be failing and needs replacement.
Can I speed up my internet by changing my WiFi password?
No. Your password only controls who can connect. Changing it does not change your speed. If you suspect someone is using your WiFi without permission, change the password to kick them off, but that is the only reason to do it.