Start with what's actually slowing you down
Before you pay for faster service or buy new equipment, find out whether the problem is your connection itself, your router, your devices, or the way you're using the network. A speed test tells you what you're getting from your internet service provider, but it doesn't tell you why your video keeps buffering or why your work calls drop. Those are usually different problems with different fixes.
Run a speed test on a device plugged directly into your modem with an ethernet cable. If that speed matches what you're paying for, your connection is fine — the slowness is happening inside your home. If the speed is much lower than your plan promises, you have a connection problem that your provider needs to fix. If it's somewhere in between, your router or the distance between your device and router is the issue.
Key Takeaways
- A wired speed test (ethernet cable to modem) shows whether your internet service itself is the problem or whether it's your home network.
- Moving your router to a central, elevated location and away from metal objects and microwaves can raise speeds on wireless devices by 20 to 40 percent.
- Older routers (more than five years old) often cannot deliver the speeds your plan provides, even if the connection is fast.
- Reducing the number of devices actively using the network and closing bandwidth-heavy apps like video streaming or downloads frees up speed for the devices you're using now.
- If your provider says your connection is working correctly but speeds are still low, the problem is almost always your router or how it's positioned.
Move and position your router for better wireless reach
A router in a closet, behind a TV, or in a corner of your house will deliver slower speeds than the same router in the middle of the house on a shelf or mounted on a wall. Walls, especially those with metal studs or pipes, block the wireless signal. So do microwaves, baby monitors, and cordless phones — they broadcast on the same 2.4 GHz frequency that older routers use.
Place your router in a central location, elevated off the ground, and away from metal objects and other wireless devices. If you have a two-story house, put it on the upper floor or in a hallway rather than in a bedroom corner. The higher and more central the router, the more even the signal spreads. You should see a noticeable speed increase on your phone or laptop within a few feet of moving it.
If your house is large or has thick walls, one router may not reach every room at usable speeds. A second router set up as a wireless extender or a mesh system (multiple units that work together) can cover dead zones. Mesh systems are more reliable than extenders because they use a single network name and hand off your connection smoothly as you move around.
Replace your router if it's older than five years
Routers wear out and become outdated. A router from 2019 or earlier may not support the faster speeds your current internet plan provides. Even if your connection is fast, an old router can't deliver that speed to your devices — it's like having a wide highway that feeds into a narrow road.
Check your router's model number (usually on a sticker on the back) and look up its specifications online. If it supports only 802.11ac (also called Wi-Fi 5), it maxes out around 1.3 gigabits per second under ideal conditions. If your plan is faster than that, you need a router that supports 802.11ax (Wi-Fi 6) or newer. A modern router in the $80 to $150 range will handle most home internet plans and last four to five years before needing replacement.
When you buy a new router, make sure it's compatible with your internet service provider. Most providers allow you to use your own router, but some require a specific model or charge a rental fee for theirs. Check your provider's website or call them before buying.
Reduce the number of devices using the network at once
Every device connected to your router — phones, tablets, smart speakers, security cameras, smart TVs, laptops — shares the available bandwidth. If five people are streaming video, downloading files, or playing online games simultaneously, each one gets a smaller slice of the total speed. Disconnecting devices you're not using right now frees up speed for the ones you are.
Check which devices are connected to your router. Log into your router's settings (usually by typing your router's IP address into a web browser — check the manual or the sticker on the back for the address). Look for a list of connected devices. Devices you don't recognize or don't use regularly can be disconnected or forgotten so they stop automatically reconnecting.
Close bandwidth-heavy apps on the devices you are using. Video streaming, large downloads, cloud backups, and online games use far more speed than email or web browsing. If you're on a video call and someone else starts streaming a movie, the call will suffer. Ask household members to pause streaming or downloads while you're doing something that needs a steady connection.
Switch to the less crowded wireless frequency if your router supports it
Most modern routers broadcast on two frequencies: 2.4 GHz and 5 GHz. The 2.4 GHz band reaches farther through walls but is crowded — it's shared with microwaves, cordless phones, and baby monitors, all of which can interfere. The 5 GHz band is faster and less crowded but doesn't travel as far.
If you're close to your router, connect to the 5 GHz network instead of 2.4 GHz. You'll see two network names in your available networks list — one may say "5G" or "5GHz" in the name. Switching to 5 GHz often raises speeds by 30 to 50 percent if you're in the same room or nearby. If you're far from the router or in another room, 5 GHz may not reach you, so you'll need to stay on 2.4 GHz or move closer.
Newer routers (Wi-Fi 6 and newer) can also use a 6 GHz band, which is even less crowded. If your router and device both support it, this band offers the fastest speeds with the least interference.
Check for interference and change your wireless channel
Even on the same frequency, routers use different channels — think of them as lanes on a highway. If your neighbors' routers are all using the same channel as yours, they interfere with each other and slow everyone down. Changing to a less crowded channel can raise your speed noticeably.
Use a free app like WiFi Analyzer (available for Android) or iStumbler (for Mac) to see which channels nearby routers are using. Then log into your router's settings and switch to a channel that has fewer neighbors on it. On the 2.4 GHz band, channels 1, 6, and 11 don't overlap with each other, so pick whichever one shows the fewest nearby networks. On 5 GHz, there are many more channels and less crowding, so the app will show you which ones are clearest.
After changing the channel, reconnect your devices and run a speed test. You may see an when ready improvement, especially if you were on a crowded channel before.
Contact your provider if speeds are still below what you're paying for
If you've moved your router, replaced it if it was old, reduced the number of connected devices, and run a wired speed test that shows speeds much lower than your plan promises, the problem is with your connection itself. This is the provider's responsibility to fix.
Call your provider's technical support and tell them your wired speed test results. Have the test results ready — most providers' websites have a speed test tool, or you can use a third-party tool like Speedtest.net. The provider can check whether your line is experiencing problems, whether there's congestion in your area, or whether you need a modem upgrade. Some providers offer free modem replacements if yours is old or faulty.
If the provider says everything on their end is working correctly but you're still not getting the speeds you're paying for, ask whether a different plan or service type (fiber, cable, or DSL) is available at your address. Sometimes the advertised speed for your plan is theoretical, and the actual speed depends on your distance from the provider's equipment or the condition of the lines serving your neighborhood.
Frequently Asked Questions
How much faster will my internet be if I move my router?
Moving a router from a closet or corner to a central, elevated location typically raises wireless speeds by 20 to 40 percent on devices in the same room or nearby. The improvement depends on how badly positioned it was before and how far your devices are from it. A wired test will show no change because the connection itself hasn't changed.
Do I need to buy a new router if mine is three years old?
Not necessarily. If your router supports Wi-Fi 5 (802.11ac) or newer and your internet plan is under 1 gigabit per second, your router is probably fine. Run a wired speed test to confirm you're getting the speeds you're paying for. If you are, the router is working. If you're not, the router may be the problem.
Will disconnecting devices I'm not using actually make my internet faster?
Yes, but only for the devices you are using. Disconnecting a smart TV or security camera frees up bandwidth for your laptop or phone. You'll notice the difference most during video calls, online gaming, or large downloads. For everyday web browsing, the difference is usually too small to notice.
What's the difference between a router and a modem?
Your modem connects to your internet service provider's network and receives the internet signal. Your router takes that signal and broadcasts it wirelessly to your devices. You need both. If your provider gave you a combined modem-router unit, they're in one box but doing two jobs.
Can I use a mesh system if I only need to cover one room?
A mesh system is overkill for one room and costs more than a single good router. Buy a single modern router and position it centrally in your home. Mesh systems make sense when you have a large house, multiple floors, or dead zones where a single router doesn't reach.