What you need to do once your internet service arrives
Once your internet service provider (ISP) has activated your account and scheduled installation, a technician will arrive to set up the modem and router — or you may do it yourself if you ordered equipment to pick up. The modem connects to the wall jack or cable line; the router plugs into the modem and broadcasts WiFi throughout your apartment. Most setups take 15 to 30 minutes. You will need to know your WiFi network name and password, which either come printed on the router itself or are sent to you by your ISP.
The physical placement of your router matters more than most people realize. A router in a central location, elevated off the floor, and away from metal objects and microwaves will reach farther and faster than one hidden in a corner or closet. If your apartment is long or has thick walls, you may need a second device — either a mesh system (which replaces your router entirely) or a WiFi extender (which repeats the signal from your existing router).
Key Takeaways
- The modem connects directly to your ISP's line; the router plugs into the modem and creates the WiFi signal you see on your devices.
- Router placement in a central, elevated location away from metal and appliances will give you the strongest signal throughout your apartment.
- Change your default WiFi password when ready after setup — the one printed on the router is the same for thousands of devices.
- If WiFi does not reach certain rooms, a mesh system replaces your router entirely, while a WiFi extender repeats the signal from your existing router.
- Restart your modem and router by unplugging both for 30 seconds if you lose connection — this fixes most temporary problems.
Connecting the modem and router in the right order
The order matters. First, plug the modem into the wall outlet and wait 2 to 3 minutes for all the lights to stabilize — you should see solid green or blue lights, not blinking red. Then plug the router into a power outlet and wait another 2 to 3 minutes. Finally, use an ethernet cable to connect the modem to the router's port labeled "WAN," "Internet," or "Uplink" — not one of the regular ethernet ports. If you skip this step or plug into the wrong port, you will have power but no internet.
Some apartments have the modem and router built into one device, called a gateway. In that case, you only plug in one unit and wait for the lights to stabilize. Check your ISP's paperwork or call their support line if you are unsure whether you have two separate devices or one gateway.
Changing your default WiFi password and network name
The WiFi password printed on your router works, but it is the same default password used on thousands of identical routers. Anyone within range who knows the model number can look up that password online. Change it when ready. Log into your router's settings by opening a web browser and typing the router's IP address — usually printed on a sticker on the router itself, often something like 192.168.1.1 or 192.168.0.1. You will be asked for a username and password, which are also on the sticker (often "admin" and "admin" or "admin" and a blank field).
Once logged in, look for a section called "WiFi Settings," "Wireless," or "Network." Change the password to something you will remember but others cannot guess — avoid birthdays, addresses, or common words. You can also change the network name (called the SSID) from the generic "TP-Link-5G" or "Netgear" to something that identifies your apartment without revealing personal information. After you save changes, the router will restart and you will need to reconnect your devices using the new password.
Connecting your devices to the WiFi network
On your phone, tablet, or computer, open the WiFi settings and look for your network name in the list of available networks. Select it and enter your password. Most devices will remember this network and reconnect automatically the next time you are in range. If a device does not connect, double-check that you typed the password correctly — passwords are case-sensitive, meaning capital letters matter.
If you have many devices, you may notice that some connect to the 2.4 GHz band and others to the 5 GHz band. Both are part of the same network, but 5 GHz is faster and works better for video streaming and gaming, while 2.4 GHz reaches farther through walls. Most modern routers handle this automatically, but if a device connects slowly or keeps dropping, you can log back into your router settings and check which band it is using.
Fixing weak or spotty WiFi coverage
If some rooms have weak signal or frequent disconnections, the problem is usually distance or obstacles. Move the router to a more central location, raise it higher (a shelf or wall mount works better than the floor), and keep it away from the microwave, cordless phone, and metal filing cabinets. These devices broadcast on the same frequencies and interfere with WiFi. If repositioning does not help, you have two options: a mesh system or a WiFi extender.
A mesh system replaces your router entirely. It consists of two or more units that work together to cover your entire apartment with one seamless network. You move the main unit to where your modem is and place the other units in weak spots. All devices see the same network name and password, so you do not have to switch networks as you move around. Mesh systems cost more upfront (typically $100 to $300) but provide more reliable coverage than extenders.
A WiFi extender is cheaper (usually $30 to $80) and plugs into a wall outlet halfway between your router and the weak area. It picks up your existing WiFi signal and rebroadcasts it. The downside is that it creates a separate network name (like "YourNetwork-Extended") that you have to manually switch to, and it uses some of your bandwidth to relay the signal, so speeds are slower than in the main room. Extenders work best for covering one additional room, not an entire apartment.
What to do when your internet stops working
Before you call your ISP, try restarting your modem and router. Unplug both devices from power, wait 30 seconds, and plug them back in. Wait 3 to 5 minutes for all lights to stabilize. This fixes most temporary problems — a glitch in the modem's memory, an overheated device, or a brief service interruption.
If restarting does not work, check whether the problem is with your WiFi or with your internet connection itself. Plug a computer directly into the modem using an ethernet cable and try to load a website. If it works, the problem is your router or WiFi — try restarting the router again, or log into its settings to see if there is a firmware update available. If the wired connection does not work either, the problem is your modem or your ISP's service. Check your ISP's website or app to see if there is a known outage in your area. If not, contact your ISP's support line and have your account number and modem model number ready.
Understanding what the modem and router lights mean
Most modems have lights for Power, Internet, and read/Upload. Most routers have lights for Power, Internet, and WiFi. A solid green or blue light means that connection is working. A blinking light means data is moving through that connection. A red light or no light means that connection is down.
On the modem, if the Internet light is red or off, your ISP's service is not reaching your apartment — restart the modem and wait 5 minutes, then check again. If it stays red, contact your ISP. On the router, if the Internet light is red or off but the modem's Internet light is green, the ethernet cable between them may be loose or plugged into the wrong port. Check that the cable is firmly connected to the modem's output port and the router's WAN or Internet port. If the WiFi light is off, WiFi is disabled — log into the router settings and turn it back on, or look for a physical WiFi button on the router itself and press it.
Frequently Asked Questions
Do I need to use the router my ISP gave me, or can I buy my own?
You can buy your own router, but you must use the modem your ISP provides — they own it and it is programmed for their network. Some ISPs charge a monthly modem rental fee, so buying your own router saves money only on the router, not the modem. Check your ISP's policy before purchasing.
Why is my WiFi password so long and complicated?
ISPs generate long passwords to make them harder to guess. You can change it to something shorter and easier to remember once you log into the router settings. Just avoid common words and personal information like your address or birthday.
Can I move my modem and router to a different room?
You can move the router anywhere in your apartment — it only needs power. The modem must stay near the wall jack or cable line where your ISP's service enters the building, unless you use a very long ethernet cable to connect them. Most apartments have the jack in a bedroom, closet, or living room wall.
What if my router keeps disconnecting from the internet?
Restart both the modem and router by unplugging them for 30 seconds. If disconnections continue, log into the router settings and check for a firmware update — manufacturers release updates to fix bugs. If the problem persists, the router may be overheating; make sure it has space around it and is not in direct sunlight or near a heat source.
Is it safe to leave the default admin password on my router?
No. Anyone on your WiFi network can log into the router settings and change your password or turn off security features. Change the default admin password to something strong as soon as you set up the router, just as you changed the WiFi password.