What you need before installation day
Starlink requires three physical things to work: the satellite dish (called a "Dishy"), a router, and a power supply. Starlink ships these together in a kit. You also need a clear view of the northern sky — the dish must see satellites passing overhead without trees, buildings, or other obstructions blocking the signal. If your roof or yard has a southern exposure with no tall obstacles within about 100 feet, you likely have a workable location.
Before ordering, check your address on Starlink's website to see what service tier is available in your area. Starlink Standard is the base option; Starlink Premium costs more and prioritizes your data during busy times. Both require a one-time hardware fee (currently around $600 for the standard dish kit) and a monthly service fee. You can cancel anytime without a contract.
You will also need a power outlet within reach of where you plan to mount the dish, and an ethernet cable or Wi-Fi connection to reach devices inside your home. The dish itself is about 2 feet across and weighs roughly 10 pounds, so you will need a mounting surface — a roof, pole, wall bracket, or even a tripod on the ground works.
Key Takeaways
- Starlink ships with a dish, router, and power supply; you need a clear view of the northern sky and a power outlet within reach of the mounting location.
- The dish must have an unobstructed line of sight to satellites — trees, buildings, and other tall objects within 100 feet can block the signal.
- Installation takes 20 to 30 minutes and involves mounting the dish, connecting cables, powering on the router, and running the Starlink app to aim the dish.
- Once the dish is active, you connect devices to the Wi-Fi network or plug an ethernet cable directly into the router for a wired connection.
- If the dish cannot see enough sky, you may need to move it to a different location, trim trees, or use a pole mount to raise it higher.
Choosing where to mount the dish
The dish works best on a roof because roofs are usually high and clear of obstructions. If your roof is flat, you can use the included mounting bracket and bolts to find the dish to the roof surface. If your roof is pitched, you will need a roof mount kit (sold separately) that angles the bracket to keep the dish level. Starlink's app will tell you the exact angle you need.
If a roof mount is not practical, a wall mount works if the wall faces north and has clear sky above it. A pole mount — a metal pole anchored to the ground or a deck — is another option and has the advantage that you can adjust the height and angle without climbing. Some people use a straightforward tripod on the ground as a temporary setup to test whether their location works before committing to a permanent mount.
Avoid mounting the dish under eaves, under trees, or on a wall that faces south or east. The dish needs to point north and slightly upward, so any obstruction in that direction will degrade or block the signal. Use the Starlink app's obstruction map before you install — it shows you exactly which parts of the sky the dish needs to see and highlights any trees or buildings in the way.
Running cables and powering on
Once the dish is mounted, run the power cable from the dish to the power supply, then plug the power supply into a wall outlet. The power cable is weatherproof and can run along the outside of your house; most people route it down the side of the house and through a window or under a door to reach an indoor outlet. If you need to run the cable a long distance, use outdoor-rated cable and find it with clips so it does not sag or get damaged.
Next, connect the ethernet cable from the dish to the router. The router is a small box with Wi-Fi and ethernet ports. Plug the ethernet cable into the port labeled "Starlink" or the main port on the back of the router. Then plug the router's power cable into another outlet. The router will take about 2 to 3 minutes to boot up; you will see lights on the front turn on and stabilize.
Once the router is on, open the Starlink app on your phone and create an account if you have not already. The app will guide you through the next steps and show you whether the dish has found satellites. If the app says the dish is searching, wait a few minutes — it can take up to 10 minutes on the first startup.
Aiming the dish using the app
The Starlink app includes an aiming tool that uses your phone's camera and compass to show you exactly where the dish needs to point. Open the app, select "Aim Dishy," and hold your phone up to the sky in the direction the app indicates. The app will show you a live view with a target circle; move your phone until the target aligns with where the dish should point. This tells you the correct angle and direction.
Once you know the angle, physically adjust the dish to match. The mounting bracket has bolts that let you tilt and rotate the dish. Loosen the bolts slightly, move the dish to the angle shown in the app, and tighten the bolts again. The app will update in real time as you adjust — you will see the signal strength improve as the dish gets closer to the correct angle.
If the app shows obstructions (trees, buildings, or terrain blocking part of the sky), you have a few options: move the dish to a different location, raise it higher on a pole, trim branches that are in the way, or wait to see if the obstruction matters in practice. Starlink's algorithm accounts for the fact that some obstructions are small or far away and may not actually block enough satellites to matter. The app will tell you if an obstruction is likely to cause problems.
Connecting your devices to the network
Once the dish is aimed and the app shows a strong signal, the router will broadcast a Wi-Fi network. The network name and password are printed on a sticker on the back of the router. On your phone, laptop, or other device, open the Wi-Fi settings, find the Starlink network, and enter the password. You should connect within a few seconds and see internet access.
For devices that need a wired connection — a desktop computer, a printer, or a streaming device — plug an ethernet cable directly into one of the ethernet ports on the back of the router. Wired connections are slightly faster and more stable than Wi-Fi, so use them for devices that stay in one place.
If you have many devices or a large home, the standard router may not reach every room with a strong Wi-Fi signal. Starlink sells a Wi-Fi extender that you can place in a distant room to boost the signal. You can also use a third-party Wi-Fi mesh system if you prefer — plug the mesh router into the ethernet port on the Starlink router and configure it to extend the network.
Troubleshooting common setup problems
If the app shows "searching for satellites" after 10 minutes, the dish is not seeing enough sky. Check the obstruction map in the app again and look for trees, buildings, or terrain that might be in the way. Move the dish to a different location or raise it higher, then wait another 5 to 10 minutes for the dish to reconnect.
If the dish connects but the internet is slow or drops out frequently, the problem is usually obstructions. Even small trees or a nearby building can reduce signal strength. Try moving the dish a few feet in any direction, or raise it higher on a pole. The app's signal strength meter will show you whether the move helped.
If the Wi-Fi network does not appear on your devices, restart the router by unplugging it for 30 seconds and plugging it back in. If that does not work, check that the ethernet cable from the dish is firmly plugged into the router. If the cable is loose, the router will not receive a signal to broadcast.
If you have internet but it is very slow, check whether other devices on the network are using a lot of bandwidth — streaming video, downloading large files, or video calls can slow everything down. You can also restart the router to clear any temporary issues. Starlink's speeds vary based on how many users are on the network at the same time, so speeds may be faster at night than during the day.
When to call Starlink support
Starlink support is available through the app and through their website. If the dish will not connect after 30 minutes, if you see error messages on the app, or if the internet works for a few minutes and then stops, contact support. Have your order number and a photo of your setup ready — support will ask you to describe what you see in the app and may ask you to restart the dish or try a different mounting location.
If you ordered a roof mount kit or other accessories and they have not arrived, you can check the status in your account on the Starlink website. Accessories usually ship separately from the main dish kit and can take a few weeks to arrive.
Frequently Asked Questions
Can I use Starlink indoors or behind a window?
No. The dish must have a direct, unobstructed view of the sky. Glass, metal, or any solid material between the dish and the sky will block the signal. The dish must be mounted outside on a roof, wall, pole, or tripod.
What if I have trees blocking the northern sky?
You can trim branches that are directly in the dish's line of sight, raise the dish higher on a pole to see over the trees, or move the dish to a different location on your property. The app's obstruction map shows exactly which parts of the sky are blocked, so you can decide whether trimming or moving is practical.
How long does the whole setup take?
Physical installation — mounting the dish, running cables, and powering on the router — takes 20 to 30 minutes. Getting the dish aimed and connected to the internet takes another 10 to 15 minutes. If you need to troubleshoot obstructions or move the dish, add 30 minutes to an hour.
Do I need a technician to install Starlink?
No. Starlink is designed for self-installation. The app guides you through every step, and the hardware is straightforward to mount and connect. If you are not comfortable working on a roof or drilling holes, you can hire a local electrician or handyperson to do the physical work while you handle the app setup.
Can I move the dish if I change my mind about the location?
Yes. The dish is not permanently attached — you can loosen the bolts, move it to a new location, and re-aim it using the app. If you move it more than a few miles away, you may need to update your service address in your Starlink account.