What happens after you order Comcast
Once you have ordered Comcast internet, the company will schedule a technician visit to your home — usually within 5 to 10 business days, though this varies by location and current demand. Before the technician arrives, you will receive a confirmation email or text with the appointment window, typically a 2-hour block. The technician will install a modem (the device that connects to Comcast's network) and a router (the device that broadcasts wifi to your home), run cables from the outside line into your home, and test the connection before leaving.
You do not need to do anything before the technician arrives except make sure someone is home during the appointment window and that the technician can access the point where the cable enters your house — usually on an exterior wall or in a basement. If you are not home, Comcast will reschedule at no charge.
Key Takeaways
- Comcast will schedule a technician visit within 5 to 10 business days; you must be home and provide access to where the cable line enters your house.
- The technician installs the modem and router, connects them, and tests the connection before leaving — you do not need technical knowledge to be present.
- Your wifi network name and password are printed on the router itself, and you can change them through the Xfinity app or by logging into your router's settings page.
- If the connection does not work after the technician leaves, restart the modem by unplugging it for 30 seconds, then plug it back in and wait 5 minutes for it to fully restart.
- Comcast charges a one-time installation fee (amount varies by location) and a monthly equipment rental fee for the modem and router unless you buy your own.
Setting up your wifi network name and password
After the technician leaves, your wifi network will be ready to use when ready. The default network name (called the SSID) and password are printed on a sticker on the back or bottom of your router. You can find them by looking for text that says "Network Name" or "SSID" and "Password" or "WiFi Password."
You can change the network name and password to something you prefer through the Xfinity app (available on iPhone and Android) or by logging into your router's settings page directly. To log in to the router, open a web browser on a device connected to the wifi, type 192.168.0.1 into the address bar, and enter the admin username and password (usually printed on the router as well). From there, you can rename your network and create a new password. Write down your new password somewhere safe — you will need it to connect new devices later.
Connecting your devices to the internet
On any phone, tablet, or computer, go to the wifi settings, find your network name in the list of available networks, select it, and enter your password. The device will connect and you should see internet access within a few seconds. Repeat this process for each device you want to connect — phones, tablets, laptops, smart TVs, and smart home devices all connect the same way.
If a device will not connect, first check that you are typing the password correctly (it is case-sensitive, meaning capital letters matter). If the password is correct but the device still will not connect, restart the device and try again. If you have many devices connecting at once, the router may slow down temporarily — this is normal and usually resolves within a minute or two.
What to do if your internet is not working
The most common fix is to restart the modem. Unplug the power cable from the back of the modem, wait 30 seconds, then plug it back in. The modem will take about 5 minutes to fully restart — you will see lights on the front of the modem blinking, then settling into a steady pattern. Once the lights are stable, try connecting to the internet again.
If restarting the modem does not fix the problem, check that the cable running from the wall into the modem is firmly connected on both ends. If the cable is loose, push it in until you hear or feel a click. If the connection is already tight and the internet still does not work, contact Comcast support at 1-800-934-6489 (the number is also on your bill and in the Xfinity app). Have your account number ready — it is on your bill or in the app — and the support representative can run diagnostics on your modem remotely.
Understanding your monthly bill and equipment fees
Comcast charges a monthly internet service fee (the amount depends on your plan and location) plus a one-time installation fee at setup. You will also see a monthly equipment rental fee for the modem and router — this is typically $10 to $15 per month, though the exact amount varies. If you want to avoid the monthly rental fee, you can buy your own modem and router that are compatible with Comcast's network.
Comcast publishes a list of approved modems and routers on its website. Popular options include the Netgear MB8600 modem and the Netgear Nighthawk router, both available at electronics retailers. If you buy your own equipment, the technician can still set it up during the installation visit, or you can set it up yourself by following the manufacturer's instructions and contacting Comcast support to register the equipment on your account.
Protecting your wifi network from unauthorized use
Your wifi password is the main barrier between your network and neighbors or passersby who might try to connect. A strong password is at least 12 characters long and includes a mix of uppercase letters, lowercase letters, numbers, and symbols. The default password Comcast provides is usually strong enough, but if you create your own, avoid using your name, address, or birthday.
You can also limit which devices can connect by using the router's access control settings, accessible through the Xfinity app or the router settings page. This feature lets you see which devices are currently connected and block specific devices if needed. If you notice a device you do not recognize connected to your network, change your wifi password when ready — this will disconnect all devices, and you will need to reconnect your own devices using the new password.
Frequently Asked Questions
Can I use my own modem and router instead of renting Comcast's?
Yes. Comcast publishes a list of compatible modems and routers on its website. Buying your own equipment costs more upfront but saves you the monthly rental fee over time. The technician can set up your own equipment during installation, or you can do it yourself by following the manufacturer's instructions and registering the equipment with Comcast.
What if I miss the technician appointment?
Comcast will reschedule at no charge. Contact them through the Xfinity app, by calling 1-800-934-6489, or by logging into your account online. You can usually reschedule for a different date and time window within a few days.
How do I know if my modem is working properly?
Look at the lights on the front of the modem. A solid or slowly blinking light typically means the connection is working. If all lights are off or red, the modem may not be powered on or may have lost connection. Try restarting it by unplugging for 30 seconds, then plugging back in and waiting 5 minutes.
Can I move my modem to a different room?
Yes, but the modem must stay connected to the cable line that enters your home. If the cable does not reach the room you want, you can buy a longer coaxial cable (the thick cable that connects modem to wall) at any electronics store. The router can be placed anywhere within range of the modem and will broadcast wifi throughout your home.
What should I do if my internet keeps dropping?
First, restart the modem by unplugging it for 30 seconds. If the problem continues, check that all cables are firmly connected. If the issue persists, contact Comcast support at 1-800-934-6489 — they can run remote diagnostics and may send a technician if the modem is faulty.