What you need before you start

A Fabric server for Fantasy Minecraft runs on your own computer or a machine on your home network, not on Minecraft's official servers. You will need: a computer that stays on (a desktop works better than a laptop), Java installed and up to date, the Fabric installer, the server software file for your Minecraft version, and mods that work with Fabric. The computer does not need to be powerful, but it should have at least 2 GB of RAM free to dedicate to the server.

Before you begin, decide which version of Minecraft you want to run — Fabric supports multiple versions, but mods are written for specific versions. Check the mod pages for the Fantasy mods you want to use, and note which version they require. All your players will need to use that same version.

You will also need to know your computer's local IP address (the address it uses on your home network, not your internet-facing address). On Windows, open Command Prompt and type ipconfig, then look for "IPv4 Address" under your network connection — it usually starts with 192.168 or 10.0. On Mac or Linux, open Terminal and type ifconfig and find the inet address.

Key Takeaways

  • read Java from java.com, then the Fabric installer from fabricmc.net, and run the installer to create the server files in a new folder.
  • read the server JAR file for your Minecraft version from the Fabric launcher, place it in the server folder, and run it once to generate the server properties file.
  • Place your Fantasy mods (the .jar files) into the mods folder inside your server directory, then restart the server.
  • Players on your home network connect by opening Minecraft, adding a server, and entering your computer's local IP address followed by :25565 (for example, 192.168.1.100:25565).
  • If the server crashes or mods conflict, check the latest.log file in the logs folder to see what went wrong.

Install Java and the Fabric launcher

Go to java.com and read the latest version of Java for your operating system. Run the installer and follow the prompts — you do not need to change any settings. Once Java is installed, restart your computer.

Next, go to fabricmc.net and click the read button for the Fabric installer. This is a small program that sets up Fabric for you. Run the installer, and it will ask you where to put the server files. Create a new folder on your computer (for example, "FantasyServer") and tell the installer to use that folder. The installer will read the necessary files and create the folder structure you need.

read and configure the server software

After the Fabric installer finishes, open the Fabric launcher (a separate program from the installer). In the launcher, go to the "Installations" tab, find the Fabric installation you just created, and click the folder icon to open the server directory. You should see a folder called "mods" — this is where you will put your Fantasy mods later.

Now you need the server JAR file. In the Fabric launcher, go to the "Versions" tab, find your Minecraft version, and look for a read link for the server. read this file and save it into your server folder (the same folder where the mods folder is). The file name will be something like "fabric-server-launch.jar".

Open a Command Prompt (Windows) or Terminal (Mac/Linux), navigate to your server folder, and type java -jar fabric-server-launch.jar nogui. The server will start, create a file called "server.properties", and then shut down. This is normal — you need to edit that file before the server runs properly.

Edit server settings and accept the EULA

In your server folder, find the file called "eula.txt" and open it in a text editor (Notepad on Windows, TextEdit on Mac). You will see a line that says eula=false. Change it to eula=true and save the file. This confirms you have read and accepted Minecraft's End User License Agreement.

Also in your server folder, open "server.properties" in a text editor. Find the line that says server-port=25565 — this is the port your server uses, and you can leave it as is. If you want to change the server name that appears to players, find motd= and type a name after the equals sign (for example, motd=Fantasy Realm). Save the file when you are done.

Add Fantasy mods to the server

read the Fantasy mods you want to use. Each mod comes as a .jar file. Make sure every mod you read is compatible with Fabric and with the Minecraft version you chose earlier — mod pages always list which versions they support.

Open your server folder and go into the "mods" folder. Drag and drop all your mod .jar files into this folder. Do not unzip them or rename them — just place the .jar files as they are. If you are using mods that depend on other mods (the mod page will say "requires X mod"), read and add those too.

Some mods conflict with each other and will crash the server. If you are new to modding, start with just two or three mods and test them before adding more. You can always add more mods later.

Start the server and connect players

Open Command Prompt or Terminal, navigate to your server folder, and type java -jar fabric-server-launch.jar nogui again. The server will start and load your mods. Wait until you see a line that says "Done" — this means the server is ready. Leave this window open while the server is running.

On any player's computer on your home network, open Minecraft, go to "Multiplayer", and click "Add Server". Type a name for the server (for example, "Fantasy Realm"), and in the "Server Address" field, type your computer's local IP address followed by :25565 (for example, 192.168.1.100:25565). Click "Done", and the server should appear in the list. Click it to join.

If a player cannot connect, check that they are using the same Minecraft version as the server and that they have the same mods installed. They will need to install Fabric and the mods on their own computer as well.

Troubleshoot crashes and mod conflicts

If the server crashes when it starts or when a player joins, look at the error message in the Command Prompt or Terminal window. For more detail, open your server folder, go into the "logs" folder, and open the file called "latest.log" in a text editor. Search for the word "error" or "exception" to find what went wrong.

Common problems include: a mod that is not compatible with your Minecraft version (check the mod page again), two mods that conflict with each other (try removing one), or not enough RAM allocated to the server. If you see "OutOfMemoryError", the server needs more memory. Stop the server, and instead of typing java -jar fabric-server-launch.jar nogui, type java -Xmx2G -jar fabric-server-launch.jar nogui to give the server 2 GB of RAM (you can change 2G to 4G or higher if your computer has enough memory).

If you cannot figure out what is wrong, remove all mods except one, restart the server, and add mods back one at a time. This helps you find which mod is causing the problem.

Keep your server running and back up your world

The server will only run while the Command Prompt or Terminal window is open. If you close the window, the server stops and players cannot join. If you want the server to run all the time, you can use a program like "screen" (on Mac or Linux) or "nssm" (on Windows) to run it in the background, but that is beyond the basics.

Your world data is saved in a folder called "world" inside your server folder. Back up this folder regularly by copying it to an external drive or cloud storage. If something goes wrong with the world, you can restore it from a backup.

Frequently Asked Questions

Do players need to install mods on their own computer?

Yes. Each player needs to install Fabric and the same mods on their own computer. They do not need to copy your server folder — just the mods themselves. If a player does not have the mods, they will see missing textures or crash when they join.

Can I run the server on a laptop instead of a desktop?

Yes, but laptops can overheat if they run a server for hours. Make sure the laptop has good ventilation, use a cooling pad if possible, and do not close the lid while the server is running. A desktop computer is more reliable for long-term use.

What if players outside my home network want to join?

You would need to set up port forwarding on your router, which exposes your network to the internet and carries security risks. For players outside your home, a hosted server or Realms is safer. This guide covers only home network servers.

How do I update a mod without losing my world?

Stop the server, replace the old mod .jar file with the new one in the mods folder, and restart the server. Your world data is separate from the mods, so it will not be affected. Always check the mod page to make sure the new version is compatible with your Minecraft version.

Why does the server say "failed to bind to port"?

Another program is already using port 25565. Either close that program, or change the port number in server.properties to something else (for example, 25566). If you change the port, players will need to use the new port number when they connect.