Where to find and move the extra action button in ElvUI

The extra action button in World of Warcraft Classic appears during specific encounters and quests — it's the large button that shows up in the middle of your screen when you need to interact with something special, like a vehicle or a quest objective. In ElvUI, this button is part of the default UI layout, and you can reposition it to anywhere on your screen by using the ElvUI configuration panel.

To move it, you first need to enter ElvUI's edit mode. Type /ec (short for /elvui config) into your chat box and press Enter. This opens the ElvUI configuration window. Look for the section labeled ActionBars in the left menu, then find Extra Action Button within that section.

Once you've located the Extra Action Button settings, you'll see a checkbox that says Enable or similar wording. Make sure this is checked so the button appears on your screen. Below that, you should see position and anchor settings that let you choose where the button sits relative to your screen or other UI elements.

Key Takeaways

  • Open ElvUI's configuration by typing /ec in chat, then navigate to ActionBars and select Extra Action Button.
  • The Extra Action Button settings include position controls that let you anchor it to different parts of your screen.
  • You can drag the button directly on screen while in edit mode, or use the configuration panel to set exact anchor points.
  • Changes save automatically in ElvUI, so you don't need to manually confirm or restart the game.

Using drag mode to reposition the button

The fastest way to move the extra action button is to drag it directly. While you have the ElvUI config window open (type /ec), look for a button labeled Edit Mode or Move near the top of the configuration panel. Click this to enter move mode, and your UI elements will become draggable.

Once you're in move mode, the extra action button will have a visible border or highlight around it. Click and hold on the button itself, then drag it to wherever you want it positioned on your screen. Most players move it to the bottom center, bottom right, or off to the side so it doesn't cover important information during combat.

After you've positioned the button where you want it, click the Edit Mode button again to exit move mode. Your new position is saved automatically — you don't need to do anything else.

Setting anchor points through the configuration panel

If you prefer precise control over the button's position, you can use the anchor settings in the ElvUI config panel instead of dragging. In the Extra Action Button section, look for fields labeled Anchor Point or Position. These let you choose which part of the screen the button attaches to — options usually include CENTER, BOTTOM, TOP, LEFT, RIGHT, and combinations like BOTTOM CENTER or TOP RIGHT.

Next to the anchor point, you'll typically see offset fields labeled X Offset and Y Offset. These numbers control how many pixels away from the anchor point the button sits. A positive X value moves the button right; a negative value moves it left. A positive Y value moves it up; a negative value moves it down. Start with small numbers like 10 or 20 to see how the button moves, then adjust from there.

This method is useful if you want to match the button's position exactly to another UI element, or if you want to save a specific position and recreate it later on a different character.

Resizing the extra action button

ElvUI also lets you change how large the extra action button appears. In the Extra Action Button configuration section, look for a field called Scale or Size. The default is usually 1.0, which represents 100 percent of the button's normal size. Increasing this number makes the button larger; decreasing it makes it smaller.

A scale of 1.2 makes the button 20 percent bigger, which can help if you have trouble clicking it during fast-paced encounters. A scale of 0.8 makes it 20 percent smaller, which is useful if you want it to take up less screen space. Changes to scale take effect when ready, so you can experiment until you find a size that feels right for your playstyle.

Hiding the button when you don't need it

Some players prefer to hide the extra action button entirely and only show it when an encounter actually requires it. To do this, find the Hide or Visibility setting in the Extra Action Button configuration. Some versions of ElvUI let you set conditions — for example, you can tell it to only show the button during combat, or only in specific zones.

If your version of ElvUI doesn't have conditional visibility, you can straightforward uncheck the Enable box to hide the button completely. You can toggle this on and off as needed by reopening the config panel and checking or unchecking the box.

Troubleshooting button positioning issues

If the extra action button isn't appearing where you moved it, or if it keeps resetting to the center of the screen, first check that the Enable option is checked in the Extra Action Button settings. If it's enabled but still not showing, try typing /ec again to reopen the config panel and verify your position settings are saved.

If the button is appearing off-screen or in an unexpected location, reset it to default by looking for a Reset button in the Extra Action Button section of the config panel. Click this to return the button to its default position, then reposition it using the drag method or anchor settings. This usually fixes any positioning glitches caused by conflicting settings.

If you've made changes but they don't seem to be saving, make sure you're closing the ElvUI config panel properly — usually by clicking the X button or pressing Escape. ElvUI saves settings when you close the panel, not while it's open.

Frequently Asked Questions

Can I move the extra action button if I'm not using ElvUI?

No — the extra action button's position is controlled by your UI addon. If you're using the default Blizzard UI instead of ElvUI, the button position is fixed and cannot be moved. You would need to install ElvUI or another customizable UI addon to reposition it.

Will moving the button affect other players in my group?

No. Your UI layout is stored locally on your computer and only affects what you see. Other players see their own UI layout, and your button position doesn't change anything for them.

What if I want the button to show only during specific encounters?

Some versions of ElvUI support visibility conditions in the Extra Action Button settings. Look for a field labeled Visibility or Conditions and enter text like "combat" or specific zone names. If your version doesn't support this, you can manually enable or disable the button by reopening the config panel.

Does the extra action button position carry over to other characters?

ElvUI can share settings across all your characters on the same account, or keep separate settings for each character. Check the ElvUI main config panel for an option labeled Profiles to see which mode you're using. If you're sharing profiles, the button position will be the same for all characters.

Can I make the button completely invisible but still clickable?

Yes — set the scale to 0 or use the Hide option in the Extra Action Button settings. The button will be invisible but will still function if you know where it is or if you use a keybind to set up it instead of clicking.