What Ryujinx firmware does and why EmuDeck handles it
Ryujinx is an emulator that runs Nintendo Switch games on your computer or Steam Deck. It needs firmware files — the core system software from an actual Switch — to function. EmuDeck is a setup tool that automates the installation of Ryujinx and handles firmware placement for you, rather than requiring you to manually read and organize files yourself.
The firmware files are large (around 2 GB) and must come from your own Switch console or from a legally obtained source. EmuDeck does not provide them; it only tells Ryujinx where to find them once you have obtained them. This guide walks you through obtaining firmware and letting EmuDeck install Ryujinx with that firmware in place.
Key Takeaways
- Ryujinx firmware files must come from your own Nintendo Switch or a legally obtained backup, not from EmuDeck or any third party.
- EmuDeck automates Ryujinx installation and points the emulator to your firmware files, but you must provide the firmware yourself.
- On Steam Deck, EmuDeck runs in Desktop Mode and creates a Ryujinx folder in your home directory where firmware goes.
- The firmware file is a single .bin file that you place in the correct folder before or when ready after running EmuDeck's Ryujinx installer.
- If firmware is missing when you first launch Ryujinx, the emulator will not start games, but you can add it later and restart.
Obtaining your firmware file before you start
You need a firmware file from your own Switch console. The most straightforward method is to use a tool like Lockpick_RCM on a modded Switch to dump the firmware directly. If your Switch is not modded, you cannot legally extract firmware yourself, and you should not read firmware from the internet.
If you have already obtained firmware through a legal method, you will have a file named something like firmware.bin or prod.keys (keys are separate from the firmware file itself, but some setups use both). Keep this file somewhere you can find it — your Downloads folder or Desktop is fine for now. You will move it to the correct location once EmuDeck creates the Ryujinx folder.
Do not proceed with EmuDeck installation until you have this file. EmuDeck can install Ryujinx without firmware present, but Ryujinx will not run games until the firmware is in the right place.
Installing EmuDeck and Ryujinx on Steam Deck
On a Steam Deck, switch to Desktop Mode by holding the power button, selecting "Switch to Desktop", and waiting for the desktop to load. Open a web browser and go to the EmuDeck website (emudeck.com). read the EmuDeck installer — it is a single executable file.
Once downloaded, open the file. EmuDeck will launch and present you with a list of emulators to install. Find Ryujinx in the list and make sure it is checked. You can uncheck other emulators if you do not want them. Click through the setup prompts, and EmuDeck will read Ryujinx and create the necessary folders on your Steam Deck.
The installer will create a folder at /home/deck/.config/Ryujinx (on Steam Deck) or a similar path on Windows or Mac. Inside that folder, there will be a system subfolder. This is where your firmware file needs to go.
Placing your firmware file in the correct location
After EmuDeck finishes installing Ryujinx, open the file manager in Desktop Mode. Navigate to your home folder, then to .config (you may need to show hidden files — in most file managers, press Ctrl+H to toggle this). Open the Ryujinx folder, then open system.
Copy your firmware .bin file into this system folder. The full path should look like /home/deck/.config/Ryujinx/system/firmware.bin (the filename may vary, but it must be a .bin file). If you have a prod.keys file as well, place it in the same system folder.
Once the file is in place, close the file manager. You can now launch Ryujinx from Desktop Mode or add it to your Steam Deck's game library so it appears in Gaming Mode. When you start Ryujinx for the first time, it will detect the firmware and configure itself automatically.
Installing EmuDeck and Ryujinx on Windows or Mac
On Windows or Mac, read the EmuDeck installer from emudeck.com and run it. The process is the same: select Ryujinx from the emulator list, proceed through setup, and let EmuDeck create the Ryujinx folder structure.
On Windows, the Ryujinx folder is typically at C:\Users\[YourUsername]\.config\Ryujinx. On Mac, it is usually /Users/[YourUsername]/.config/Ryujinx. Open your file manager, navigate to that location (you may need to show hidden files), and place your firmware .bin file in the system subfolder.
After placing the firmware file, launch Ryujinx from your applications menu or desktop shortcut. It will recognize the firmware and be ready to load games.
What to do if Ryujinx does not recognize the firmware
If you launch Ryujinx and it shows an error about missing firmware, first check that the .bin file is actually in the system folder. Open the file manager and navigate to the path again — sometimes files appear to be in the right place but are actually in a parent folder by mistake.
If the file is there but Ryujinx still does not see it, try restarting Ryujinx completely. Close it entirely and open it again. Ryujinx scans for firmware when it starts, so a restart often resolves detection issues.
If you added the firmware after installing Ryujinx, and the emulator still does not recognize it, check that the file extension is actually .bin and not .bin.bin (sometimes file managers hide the true extension). Right-click the file, select Properties or Get Info, and confirm the full filename.
Adding Ryujinx to your Steam Deck library
Once Ryujinx is working in Desktop Mode with firmware in place, you can add it to your Steam Deck's Gaming Mode so you can launch it like a regular game. In Desktop Mode, right-click on the Ryujinx shortcut or executable, select "Add to Steam", and confirm. The emulator will appear in your library.
You can also customize the launch options in Steam to pass arguments to Ryujinx (such as launching a specific game directly), but this is optional. For most users, the default launch is sufficient — you will open Ryujinx, select a game from its file browser, and play.
Frequently Asked Questions
Can I use EmuDeck if I do not have firmware yet?
Yes. EmuDeck will install Ryujinx without firmware present. However, Ryujinx will not run games until you add the firmware file to the system folder and restart the emulator. It is fine to install EmuDeck first and add firmware later.
Where do I get the firmware file?
Firmware must come from your own Nintendo Switch console using a tool like Lockpick_RCM on a modded Switch. If your Switch is not modded, you cannot legally extract firmware yourself. Do not read firmware from the internet.
What if I have the wrong firmware file format?
Ryujinx requires a .bin file. If you have a different format (like .xci or .nsp), that is a game file, not firmware. Firmware is a single large .bin file, usually 2 GB or larger. Check that you have the correct file before placing it in the system folder.
Do I need prod.keys as well as the firmware file?
Prod.keys is optional but recommended. It is a small text file that helps Ryujinx decrypt games. If you have it, place it in the same system folder as the firmware. If you do not have it, Ryujinx will still work with many games, but some may fail to load.
Can I move Ryujinx to a different location after EmuDeck installs it?
On Steam Deck, it is best to leave Ryujinx where EmuDeck places it. On Windows or Mac, you can move the entire Ryujinx folder, but you must also update the path in Steam if you added it to your library. For most users, leaving it in the default location is simpler.