Traffic appears in BeamNG Drive through the traffic system, which you control in the main menu before you start a scenario or free roam session
BeamNG Drive does not spawn traffic by default. You need to enable it through the game's settings menu, and the process differs slightly depending on whether you are starting a new scenario, loading free roam, or using a custom map. The traffic system in BeamNG is optional because it affects performance — adding vehicles to the road uses CPU and GPU resources, so the game lets you decide whether you want it running.
The most straightforward way to enable traffic is to start a scenario or free roam session, then look for traffic settings in the level or world options before you load in. Once traffic is on, you will see AI-controlled vehicles driving on roads throughout the map, following traffic rules and responding to your vehicle.
Key Takeaways
- Traffic is disabled by default in BeamNG Drive and must be turned on through the main menu before you load a scenario or free roam session.
- The traffic toggle appears in different places depending on whether you are loading a scenario, free roam, or a custom map.
- Enabling traffic reduces frame rate on lower-end systems because the game must simulate multiple vehicles at once.
- You can adjust traffic density in some scenarios to balance performance with the number of vehicles you see on the road.
Enabling traffic in scenarios
When you select a scenario from the main menu, the game shows you a preview screen with options before the level loads. Look for a section labeled "Traffic" or "AI Traffic" — this is usually a toggle switch or checkbox. Click or tap it to turn traffic on, then proceed to load the scenario.
Some scenarios have additional traffic settings below the main toggle. You may see a slider for traffic density, which controls how many vehicles appear on the road. Moving the slider to the right increases traffic; moving it left decreases it. If your frame rate drops noticeably when you load in, return to the main menu and lower the density slider.
Enabling traffic in free roam
Free roam works the same way as scenarios. From the main menu, select a map and free roam mode. Before the world loads, you will see a settings screen. The traffic toggle is usually near the top or in a "World Settings" section. Enable it, adjust density if the option appears, and load the world.
In free roam, traffic persists across the entire map, so enabling it affects performance more noticeably than in a single scenario. If you experience stuttering or frame drops, disable traffic or reduce its density and reload the world.
Traffic density and performance
Traffic density controls how many AI vehicles spawn and drive on the roads. Higher density means more cars, trucks, and buses, which looks more realistic but uses more system resources. Lower density means fewer vehicles and smoother performance on older or less powerful computers.
If you have a mid-range or older graphics card, start with traffic density at 50 percent or lower. Load the scenario, drive for a minute, and check your frame rate. If it stays above 60 frames per second, you can increase density. If it drops below 50, lower it further or disable traffic entirely.
What to do if traffic does not appear
If you enabled traffic but no vehicles appear on the road, first check that you actually toggled the setting on — it is straightforward to miss if the menu is small. Return to the main menu, reload the scenario or world, and verify the traffic toggle is switched to "on" or "enabled."
If traffic is on but still not showing, the scenario or map may not support traffic. Some custom maps and older scenarios do not have traffic systems built in. Check the scenario description or map details to see if traffic is listed as a feature. If it is not mentioned, that map does not include traffic.
Custom maps and traffic
Custom maps created by the community may or may not include traffic support. When you load a custom map, check the settings screen for a traffic option. If no traffic toggle appears, the map creator did not add traffic to that world. You can still drive and explore, but you will not see AI vehicles.
Some popular custom maps like Italy and Japan do include traffic. Others focus on empty roads or off-road terrain where traffic would not make sense. Read the map description before loading to know what to expect.
Frequently Asked Questions
Does traffic affect my frame rate?
Yes. Each AI vehicle the game simulates uses CPU and GPU resources. More traffic means lower frame rates, especially on systems with older or mid-range hardware. If your frame rate drops, reduce traffic density or disable it entirely.
Can I turn traffic on and off while playing?
No. Traffic settings are locked once a scenario or world loads. You must return to the main menu, reload the level, and change the traffic setting before you load in again.
Why does traffic sometimes disappear while I am driving?
Traffic vehicles despawn when they are far behind you or off-screen to save performance. As you drive forward, new traffic spawns ahead of you. This is normal behavior and helps the game run smoothly.
Do AI vehicles follow traffic laws?
Yes. AI traffic stops at red lights, yields at intersections, and follows speed limits on roads. They will also react to your vehicle if you cut them off or drive into their lane.
Is there a way to increase traffic without lowering frame rate?
Not significantly. More traffic always costs performance. Your only options are to upgrade your hardware, lower other graphics settings like shadow quality or draw distance, or accept fewer vehicles on the road.