Connect your Oculus to a TV using a casting cable or wireless casting
You can show what you're seeing in your Oculus headset on a TV screen in two ways: plug a cable directly into your headset, or use wireless casting through your phone. The cable method works when ready and needs no setup. Wireless casting is simpler to use once it's running, but requires your phone, your Oculus headset, and your TV all on the same WiFi network.
Which method you choose depends on what headset you own and what's already plugged in near your TV. Meta Quest 3 and Quest Pro headsets have a USB-C port and work with any USB-C to HDMI cable. Meta Quest 2 has a Micro USB port and needs a Micro USB to HDMI adapter. If you don't have the right cable or adapter, the wireless method takes about five minutes to set up instead.
Key Takeaways
- A USB-C to HDMI cable (Quest 3 and Pro) or Micro USB to HDMI adapter (Quest 2) plugs directly into your headset and TV with no setup needed.
- Wireless casting sends your headset view to your TV through the Meta Quest app on your phone, and works from anywhere in your home.
- Your phone, headset, and TV must all be on the same WiFi network for wireless casting to work.
- The cable method shows your view with almost no delay, while wireless casting may lag by one to two seconds.
Connect with a cable for when ready display
The cable method is the fastest way to get your Oculus on screen. You need a USB-C to HDMI cable (Quest 3 and Pro) or a Micro USB to HDMI adapter (Quest 2). These cost between $15 and $30 and are sold at most electronics retailers. Plug the USB end into the port on the bottom of your headset and the HDMI end into any free HDMI port on your TV.
Turn on your headset and your TV. Your TV should show your Oculus view within a few seconds. If it doesn't, try a different HDMI port on your TV — sometimes one port works better than another. If you still see nothing, restart your headset by holding the power button for ten seconds, then try again.
The cable method has almost no delay between what you see in the headset and what appears on the TV. This makes it the best choice if you're playing games or showing something that needs quick response. The downside is you're tethered to the TV by a cable, so you can't move far from the screen.
Use wireless casting through your phone
Wireless casting sends your headset view to your TV without any cable. You control it through the Meta Quest app on your phone. Start by making sure your phone, your Oculus headset, and your TV are all connected to the same WiFi network — this is the most common reason wireless casting fails.
Open the Meta Quest app on your phone and tap the Devices tab at the bottom. Select your headset from the list. Tap the Cast button (it looks like a rectangle with a WiFi symbol in the corner). Choose your TV from the list of available devices. Your TV should show your headset view within ten to fifteen seconds.
If your TV doesn't appear in the list, make sure it supports casting — most TVs made in the last five years do, but older models may not. Check your TV's manual or settings to confirm it has casting built in. If it does and still doesn't show up, restart your TV and try again.
Troubleshoot when the connection won't work
If your cable connection isn't showing anything, the cable itself may be faulty. Try a different USB-C to HDMI cable or adapter if you have one. If that works, your original cable is the problem. Also check that you're plugging into the correct port on your headset — the USB-C or Micro USB port is on the bottom center, not on the sides.
For wireless casting, the most common issue is that your devices are on different WiFi networks. Your phone might be on your main network while your headset is on a guest network, or vice versa. Open your phone's WiFi settings and confirm which network you're on, then check your headset's WiFi in the Settings menu. Switch your phone to match your headset's network if they differ.
If wireless casting is very slow or keeps dropping, move your phone and headset closer to your WiFi router. Walls and distance weaken the signal. If you're far from the router, the connection may be too weak to cast smoothly. Moving ten feet closer often fixes the problem.
Understand the difference between casting and mirroring
Casting and mirroring are not the same thing. Casting sends your headset view to the TV so other people can watch what you're doing. Mirroring would show your phone's screen on the TV instead. The Meta Quest app only does casting — it shows your headset's view, not your phone's screen. This is what you want when you're playing a game or showing someone else what you're experiencing.
When you cast, your phone acts as a remote control. You can adjust volume, pause, or stop the cast from your phone while the TV displays your headset view. Your phone's screen stays dark and shows only the casting controls — it doesn't appear on the TV.
Know when to use cable versus wireless
Use the cable method if you want zero delay and you're staying in one spot. This is best for competitive games where timing matters, or for showing someone standing next to your TV. The cable costs money upfront but has no setup and works every time.
Use wireless casting if you want to move around, if you don't have the right cable, or if you're showing something that doesn't need when ready response. Wireless casting takes a few seconds to set up the first time, but after that you can cast with one tap. The trade-off is a one to two second delay between your headset and the TV, which most people don't notice unless they're playing fast-paced games.
If you cast often, buy the cable anyway. Having both options means you can pick the best one for each situation. The cable is cheap enough that it's worth keeping on hand.
Frequently Asked Questions
Can I cast to a TV that doesn't have WiFi built in?
No, wireless casting requires your TV to support it natively. If your TV is older or doesn't have WiFi, use the cable method instead. You can also buy a streaming device like a Roku or Fire Stick that plugs into your TV's HDMI port — these devices support casting and work with older TVs.
Does casting drain my headset battery faster?
Wireless casting uses slightly more power than not casting, but the difference is small — maybe five to ten percent less battery life. The cable method uses no extra battery because the cable carries the video signal, not your headset's wireless radio. If battery life matters, use the cable.
Why is my wireless cast so laggy?
Lag usually means your WiFi signal is weak. Move closer to your router, or move your router closer to where you're playing. If other people are using a lot of bandwidth on your network, ask them to pause streaming or downloads. Restarting your router sometimes helps too — unplug it for ten seconds and plug it back in.
Can I cast to multiple TVs at the same time?
No, you can only cast to one TV at a time. If you want to show your headset view on a different TV, stop the current cast and start a new one on the other TV. This takes about ten seconds.
Do I need to buy an official Meta cable?
No, any USB-C to HDMI cable works with Quest 3 and Pro, and any Micro USB to HDMI adapter works with Quest 2. You don't need to buy from Meta. Check the reviews to make sure the cable is rated for video, not just charging — some cheap cables only carry power.