The fastest way: use the USB cable that came with your PS4
Plug the USB cable into the controller's micro-USB port on the bottom, then plug the other end into any USB port on the front or back of your PS4. The controller will light up, and within a few seconds the PS4 will recognize it. You can start playing when ready — you do not need to wait for anything to finish or press extra buttons.
This method works even if the controller battery is completely dead. Once the controller is plugged in and recognized, you can unplug it and use it wirelessly if you want, or keep it plugged in while you play.
Key Takeaways
- A wired connection using the USB cable is the fastest and most reliable way to connect a PS4 controller, and works even with a dead battery.
- Wireless connection requires you to hold the PS button and Share button together for three seconds, then select the controller from the PS4's Bluetooth menu.
- The PS4 can connect up to four controllers at once, whether wired or wireless.
- If a controller stops responding, unplugging it and plugging it back in usually fixes the problem without losing your progress.
Connecting wirelessly using Bluetooth
Hold down the PS button (the large button in the center) and the Share button (to the left of the PS button) at the same time for about three seconds. The light on the back of the controller will start flashing white, which means it is searching for the PS4.
On your PS4, go to Settings, then Devices, then Bluetooth Devices. You should see your controller listed. Select it, and the PS4 will pair with it. The light will stop flashing and stay solid, which means the connection is complete.
Once paired, the controller will automatically connect to your PS4 whenever you press the PS button — you will not need to pair it again unless you connect it to a different device or reset the controller.
What to do if the controller does not show up
If the controller does not appear in the Bluetooth menu, unplug it from USB (if it was plugged in), wait ten seconds, then plug it back in. Try the pairing steps again while it is connected by cable.
If it still does not appear, the controller battery may be too low. Leave it plugged in for at least 30 minutes, then try again. A completely dead controller can take longer to wake up and respond to pairing commands.
If you have tried these steps and the controller still will not pair, try a different USB cable. Some cables are designed for charging only and do not carry data — the cable that came with your PS4 is a data cable, but a phone charger cable might not be.
Connecting multiple controllers at once
Your PS4 can recognize up to four controllers simultaneously. Each one connects the same way — either plug it in with USB or pair it wirelessly using the PS button and Share button method.
If you are connecting multiple controllers, the easiest approach is to plug them all in with USB cables first. They will all light up and be ready to use right away. You can then unplug any of them and switch to wireless if you prefer.
Switching a controller between devices
A PS4 controller can pair with your PS4, a PC, a phone, or other devices, but it can only be actively connected to one device at a time. If you want to use the same controller on a different device, you will need to unpair it from the PS4 first.
To unpair a controller from your PS4, go to Settings, Devices, Bluetooth Devices, find the controller in the list, and select Forget. The controller will no longer automatically connect to that PS4. When you want to use it with the PS4 again, you can pair it using the same wireless method or just plug it in with USB.
Keeping your controller charged and ready
The PS4 controller battery lasts roughly 4 to 8 hours of play, depending on how bright the light bar is and what game you are playing. You can charge it by plugging the USB cable into the controller and the PS4 (or any USB power adapter), whether the PS4 is on or off.
The PS4 will show you the controller's battery level on the home screen. If the battery gets very low during play, the controller will vibrate and show a low-battery warning. At that point, you have a few minutes left before it shuts down — plug it in or switch to a second controller if you have one.
Troubleshooting a controller that stops responding mid-game
If a wireless controller suddenly stops responding while you are playing, the connection has likely dropped. Unplug it from USB (if it was plugged in), wait five seconds, then plug it back in. The PS4 will recognize it again within a few seconds, and you can resume playing.
If you were playing wirelessly without a cable, hold the PS button to turn the controller off, then press it again to turn it back on. This forces the controller to reconnect to the PS4. You should not lose your game progress — the PS4 will pause the game while the controller reconnects.
Frequently Asked Questions
Can I use a PS5 controller on my PS4?
No. PS5 controllers use a different wireless protocol and will not pair with a PS4. You need a PS4 controller to play on a PS4. However, you can use a PS4 controller on a PS5 for most games.
Do I need a PlayStation Network account to connect a controller?
No. The controller connects to the PS4 itself, not to your account. You can plug in a controller and use it when ready. You only need a PlayStation Network account if you want to play online games or access certain features.
Why does my controller keep disconnecting?
Wireless disconnections usually happen when the controller is too far from the PS4 (more than 20 feet), or when something is blocking the signal between them. Move closer to the PS4 or remove obstacles. If it keeps disconnecting even when close, try plugging it in with USB instead, or try pairing it again from scratch.
Can I charge my PS4 controller with any USB cable?
Yes, any micro-USB cable will charge the controller. However, some cables (like phone chargers) are charging-only and will not let you pair the controller wirelessly. The cable that came with your PS4 works for both charging and pairing.