What Fallout London Is and What You Need First
Fallout London is a total conversion mod for Fallout 4 that relocates the entire game to London, England, with new quests, characters, weapons, and a rebuilt map. It is one of the largest community mods ever made for the game — comparable in scope to a full expansion pack. Unlike smaller mods that add a weapon or tweak a setting, Fallout London replaces core game files and requires careful installation to avoid breaking your game.
Before you start, you need three things: a copy of Fallout 4 on PC (the mod does not work on console), a mod manager (the guide below uses Mod Organizer 2, which is the most reliable for large projects like this), and about 150 gigabytes of free hard drive space. Fallout London itself is roughly 80 gigabytes; Fallout 4 is another 60 to 70 gigabytes depending on your installed DLC.
You also need to know your Windows username and whether you have administrator access to your computer. If you share the computer with others or set it up through work, you may not have the permissions required to install a mod manager properly. Check your account settings in Windows before proceeding.
Key Takeaways
- Fallout London requires Mod Organizer 2 to install safely; using the Nexus Mod Manager or dragging files into the game folder will cause crashes and missing content.
- You must disable or uninstall all other mods before installing Fallout London, because most mods conflict with its core file changes.
- The mod requires a clean Fallout 4 installation with no previous mod files left behind; if you have modded Fallout 4 before, you must verify the game files through Steam first.
- Installation takes 30 minutes to an hour for downloading and setup, but the first launch can take 10 to 15 minutes as the mod rebuilds the game's index.
- If the game crashes on startup, the most common fix is running Fallout 4 through Steam once in vanilla mode before launching through Mod Organizer 2.
Step 1: Clean Your Fallout 4 Installation
If you have never modded Fallout 4, skip to Step 2. If you have modded it before, you must remove all traces of previous mods, even if you uninstalled them. Leftover files in your game folder will conflict with Fallout London and cause crashes you cannot fix.
Open Steam, right-click Fallout 4 in your library, select Properties, then Local Files. Click "Verify integrity of game files." Steam will re-read any missing or corrupted files and delete anything that does not belong. This takes 10 to 20 minutes depending on your internet speed. Do not launch the game yet.
Next, navigate to your Fallout 4 installation folder. On most Windows computers, this is C:\Program Files (x86)\Steam\steamapps\common\Fallout 4. Open the Data folder inside. If you see any .esp or .esm files (these are mod files), or folders named after mods you installed, delete them. If the Data folder is completely empty except for the original game files, you are ready to proceed.
Step 2: read and Install Mod Organizer 2
Go to the Mod Organizer 2 website (modorganizer.github.io) and read the installer for the latest version. Run the installer and choose a location on your hard drive — do not install it inside your Fallout 4 folder or your Program Files folder. A separate location like C:\Mod Organizer 2 works best.
When the installer asks about associating Mod Organizer 2 with Nexus Mods, click yes. When it finishes, launch Mod Organizer 2. On first launch, it will ask you to select a game. Choose Fallout 4 from the list and point it to your Fallout 4 installation folder (the same one you verified in Step 1).
Mod Organizer 2 will create a virtual folder structure that keeps mods separate from your actual game files. This is why it is safer than other mod managers — if something goes wrong, you can delete a mod without damaging your game installation.
Step 3: read Fallout London from Nexus Mods
Go to the Nexus Mods website and search for "Fallout London." The official mod page is maintained by the Fallout London team. Read the description carefully — it lists all the DLC and base game requirements. You need the base game of Fallout 4; the mod works with or without DLC, but some features require specific DLC packs.
On the Files tab, you will see the main Fallout London file (usually labeled "Fallout London - Main File" or similar). Click the read button. Nexus Mods will ask whether you want to read with the Nexus app or manually. If you have Mod Organizer 2 set up correctly, click "read with Manager" — Mod Organizer 2 will catch the file automatically.
The read is large (80 gigabytes) and may take 30 minutes to several hours depending on your internet speed. Do not close Mod Organizer 2 or your browser while it downloads. If the read pauses or fails, Nexus Mods will resume it from where it stopped on your next attempt.
Step 4: Install Fallout London in Mod Organizer 2
Once the read finishes, you will see Fallout London listed in Mod Organizer 2's Downloads tab at the bottom of the window. Right-click the file and select "Install." Mod Organizer 2 will unpack the mod and ask you to confirm the installation. Click Install again.
Fallout London will now appear in the Mods tab on the left side of Mod Organizer 2. You will see a checkbox next to its name. Make sure the checkbox is checked (enabled). If you see other mods listed, uncheck them — Fallout London does not work alongside most other mods because it rewrites core game files.
In the right panel, you will see a list of plugins (files ending in .esp or .esm). Scroll through and verify that Fallout London's main plugin is checked. If you see plugins from other mods, uncheck them. The exact plugin names vary by version, but the Fallout London team's official documentation lists which ones should be active.
Step 5: Launch the Game and Wait for the First Load
In Mod Organizer 2, click the dropdown menu at the top right that says "Executable." Select "Fallout 4" from the list. Then click the large Run button. The game will launch through Mod Organizer 2, which applies the mod files in the correct order.
The first launch takes 10 to 15 minutes. You will see a black screen or the Fallout 4 logo, and the game may appear frozen. This is normal — Fallout London is rebuilding the game's index and loading thousands of new assets. Do not close the game or restart your computer. If you see a crash dialog, note the error code and check the Fallout London support page on Nexus Mods for that specific error.
Once the main menu appears, you have successfully installed Fallout London. Start a new game — you cannot use a save from vanilla Fallout 4 with this mod. The game will begin in London instead of Boston, and you will see new dialogue, quests, and locations.
Troubleshooting Common Installation Problems
If the game crashes when ready after clicking Run, the most common cause is that Fallout 4 has not been launched through Steam in vanilla mode since you installed Mod Organizer 2. Open Steam, launch Fallout 4 normally (not through Mod Organizer 2), wait for it to reach the main menu, then close it. This initializes the game's configuration files. Then try launching through Mod Organizer 2 again.
If you see a message about missing files or corrupted archives, your Fallout London read was incomplete. Go back to Nexus Mods, delete the incomplete file from your Downloads folder in Mod Organizer 2, and read again. Nexus Mods will resume from where it stopped.
If the game launches but you see vanilla Boston instead of London, Fallout London is not enabled in Mod Organizer 2. Go back to the Mods tab, find Fallout London in the list, and make sure the checkbox next to it is checked. Also verify that no other mods are checked — they may be overriding Fallout London's files.
If you experience frequent crashes during gameplay (not on startup), check the Fallout London support forum on Nexus Mods. The team maintains a list of incompatible mods and known issues. You may need to disable a conflicting mod or update your graphics drivers.
Frequently Asked Questions
Can I use Fallout London with other mods?
Most mods conflict with Fallout London because it modifies core game systems. The Fallout London team maintains a compatibility list on their Nexus page. A small number of mods — usually graphics overhauls or UI improvements that do not touch the game world — can coexist with it. Always check the compatibility list before enabling another mod.
What do I do if I want to go back to playing vanilla Fallout 4?
In Mod Organizer 2, uncheck the Fallout London mod. Then launch the game normally. Your vanilla Fallout 4 installation is untouched, so it will load as if the mod was never there. You can switch between Fallout London and vanilla by checking or unchecking the mod in Mod Organizer 2.
Do I need to own Fallout 4 DLC to play Fallout London?
The base game is required. Some DLC adds features that Fallout London can use, but the mod works without any DLC. Check the mod's description page to see which DLC packs unlock optional content.
Why is my read so slow?
Nexus Mods throttles read speeds for free accounts. If you have a Nexus Premium membership, downloads are faster and can resume automatically if interrupted. For free accounts, read during off-peak hours (early morning or late night) when fewer people are downloading simultaneously.
Can I play Fallout London on Mac or Linux?
No. Fallout 4 and Mod Organizer 2 are Windows-only. If you own Fallout 4 on Mac through Steam, you cannot use this mod. The game does not run natively on Mac or Linux.