Use the controller's pairing mode without pressing the sync button

If your wireless controller's sync button is broken, missing, or unreachable, you can still pair it by holding down the L and R buttons together for three seconds. This puts the controller into pairing mode just as the sync button would. Your Switch will then detect it as a new controller ready to connect.

The L and R button method works on most wireless controllers made for the Switch, including Pro Controllers, Joy-Cons in a grip, and third-party wireless controllers. The timing matters — hold both buttons down for a full three seconds, then release. You should see the controller's lights flash or change color to show it has entered pairing mode.

Once the controller is in pairing mode, go to your Switch's home screen, open Settings, select Controllers and Sensors, then choose Change Grip/Order. Your Switch will scan for nearby controllers and display your controller's name. Select it to complete the pairing.

Key Takeaways

  • Hold L and R buttons together for three seconds to enter pairing mode if the sync button does not work.
  • After entering pairing mode, go to Settings > Controllers and Sensors > Change Grip/Order on your Switch to find and select the controller.
  • The controller's lights will flash or change when pairing mode is active, showing the process is working.
  • This method works on Pro Controllers, Joy-Cons in a grip, and most third-party wireless controllers designed for the Switch.

Why the sync button fails and when L and R is your only option

The sync button on a Switch controller is a small physical button that can break from repeated use, water damage, or a fall. If the button is stuck, unresponsive, or the plastic around it has cracked, pressing it will not trigger pairing mode. The L and R button combination bypasses the sync button entirely and sends the same pairing signal through a different path in the controller's electronics.

You should try the L and R method if you have already pressed the sync button multiple times with no result, or if you can see the button is physically damaged. There is no harm in trying this approach first — it takes five seconds and costs nothing.

Step-by-step pairing with L and R buttons

Make sure your Switch is powered on and you are on the home screen. Hold the wireless controller in your hands so you can reach both the L button (on the left side) and the R button (on the right side) at the same time.

Press and hold both L and R for exactly three seconds, then release both buttons at once. You should see the controller's LED lights (usually on the back or bottom) begin to flash or change color. This flash or color change means the controller has entered pairing mode and is broadcasting a signal that your Switch can detect.

While the controller is still in pairing mode, pick up your Switch or Switch Lite and press the Home button to go to the home screen. Open the Settings menu (the gear icon), scroll down and select Controllers and Sensors, then choose Change Grip/Order. Your Switch will begin searching for wireless controllers nearby.

Within a few seconds, your controller should appear in the list with its name or model number. Select it from the list. The Switch will confirm the pairing, and the controller's lights will stop flashing. You can now use the controller normally.

What to do if L and R does not work

If holding L and R for three seconds does not make the controller's lights flash, the controller may have a deeper hardware problem beyond a broken sync button. Try these steps before assuming the controller is broken beyond repair.

First, make sure the controller has a full battery charge. A controller with very low battery may not respond to pairing commands. Plug it into a USB-C cable connected to a power source or to your Switch dock and wait at least 30 minutes. Then try the L and R pairing method again.

Second, try the pairing process on a different Switch if you have access to one. If the controller pairs successfully on another Switch, the problem is with your original Switch's wireless receiver, not the controller. If the controller still does not pair on any Switch, the wireless radio inside the controller is likely damaged and the controller will need to be replaced.

Third, restart your Switch completely. Hold the power button on the top of the console for 10 seconds until the screen goes black, wait 30 seconds, then press the power button again to turn it back on. Once it has fully booted, try the L and R pairing method one more time.

Pairing multiple controllers without a working sync button

If you need to pair more than one controller and none of them have working sync buttons, you can pair them one at a time using the L and R method. Pair the first controller, let it connect fully, then put it down. Pick up the second controller, hold L and R for three seconds, and repeat the pairing steps through Settings.

Your Switch can remember up to 10 wireless controllers at once. Once a controller is paired, you do not need to pair it again unless you reset the controller or clear the pairing from your Switch's settings. If you are pairing controllers for multiple people in your household, each person can use their own controller without re-pairing it every time.

Replacing a broken sync button versus buying a new controller

If your controller's sync button is physically broken but everything else works, you have two paths: repair the button or replace the controller. The L and R pairing method means you can keep using the controller even with a broken sync button, so replacement is not urgent.

Repairing the sync button requires opening the controller's case and either cleaning the button mechanism or replacing the button itself. This is possible if you are comfortable with small electronics and have a replacement button, but it voids any warranty and carries a small risk of damaging other parts during disassembly. Many people find it simpler to buy a replacement controller.

A new official Nintendo Pro Controller costs between $60 and $70. Third-party wireless controllers cost less but vary in build quality and durability. Since you can pair and use any controller without a working sync button by using the L and R method, you can wait for a sale or replace the controller on your own timeline rather than when ready.

Frequently Asked Questions

Does the L and R method work on Joy-Cons?

Yes, but only when the Joy-Cons are attached to a grip or holder. Individual Joy-Cons have a sync button on the side and do not respond to the L and R combination. If you are using Joy-Cons in a grip and the grip's sync button is broken, the L and R method will work.

Will pairing with L and R damage my controller?

No. Holding L and R is a normal pairing method built into the controller's firmware. It sends the same signal as the sync button and causes no wear or damage to the controller.

How long does pairing usually take?

Once you hold L and R and the lights flash, pairing through the Settings menu takes 10 to 20 seconds. If it takes longer than a minute, the controller may have lost pairing mode — release it, wait 10 seconds, and try the L and R combination again.

Can I pair a controller if my Switch is in sleep mode?

No. Your Switch must be fully powered on and showing the home screen for pairing to work. If your Switch is in sleep mode, press the power button to wake it up, then try pairing the controller.

What if the controller pairs but then disconnects when ready?

This usually means the controller's battery is very low. Charge it fully, then try using it again. If it still disconnects, the wireless radio may be failing and the controller may need replacement.