The two ways to connect a PS3 controller

A PlayStation 3 controller connects in two ways: by USB cable while you are setting it up, or wirelessly once it recognizes your device. The USB connection is how you first pair the controller to whatever you want to use it with — a computer, phone, or another console. After that pairing happens, the controller can connect wirelessly using Bluetooth, which means you do not need the cable anymore.

Which method you use depends on what device you own and what you want to do with it. A Windows PC or Mac needs the USB cable for the initial pairing. A PlayStation 4 or 5 can use either method. An Android phone or tablet usually works wirelessly only, without needing USB at all. The steps are different for each, so find your device type below.

Key Takeaways

  • PS3 controllers pair through USB first, then connect wirelessly after that initial setup is complete.
  • Windows PCs and Macs require the USB cable during pairing; Android devices can pair wirelessly without a cable.
  • The controller will not connect wirelessly until you have plugged it in and let the device recognize it at least once.
  • Once paired, you can use the controller on multiple devices, but it only connects to one at a time.
  • If the controller stops responding, unplugging and replugging the USB cable usually restores the connection.

Connecting a PS3 controller to Windows

Plug the PS3 controller into your Windows PC using a micro-USB cable. The cable goes into the small port on the back of the controller. Windows will recognize it when ready and install any drivers it needs — you will see a notification in the bottom right corner of your screen. Wait for that notification to finish, which usually takes 30 seconds to a minute.

Once Windows recognizes the controller, you can unplug the USB cable. The controller will now connect wirelessly to your PC using Bluetooth. Press the PlayStation button (the large button in the center) and hold it for three seconds. The four lights on the controller will flash. When one light stays on steady, the controller is connected. You can now use it to play games or control your PC.

If the controller does not connect wirelessly after you unplug it, plug it back in and try again. Sometimes Windows needs a second attempt to complete the pairing. If it still does not work, restart your PC with the controller plugged in, then unplug it and press the PlayStation button again.

Connecting a PS3 controller to a Mac

Plug the PS3 controller into your Mac using a micro-USB cable. macOS will recognize the controller automatically, just as Windows does. You will see a notification appear on your screen. Let it finish installing, which takes about a minute.

After the installation completes, unplug the USB cable. Press and hold the PlayStation button for three seconds. The lights on the controller will flash. When one light stops flashing and stays on, the controller is paired with your Mac. You can now use it in games or other applications that support controllers.

If the wireless connection does not work after unplugging, plug the cable back in and restart your Mac. Then unplug the cable again and press the PlayStation button. This usually fixes any pairing problems on macOS.

Connecting a PS3 controller to Android

Android phones and tablets can connect to a PS3 controller wirelessly without needing a USB cable first. Open your device's Settings, then go to Bluetooth. Make sure Bluetooth is turned on. Press and hold the PlayStation button on the controller for three seconds until the lights begin to flash. Your Android device should show "PLAYSTATION(R)3 Controller" in the list of available devices. Tap it to connect.

Once you tap it, the controller will pair with your Android device. One light on the controller will stop flashing and stay on. You can now use the controller in games and apps that support it. The connection will stay active as long as Bluetooth is on and the controller is within range (usually about 30 feet).

If the controller does not appear in your Bluetooth list, make sure the controller has a charged battery. A PS3 controller with a dead battery will not show up. Plug it into any USB power source for 15 to 20 minutes, then try again.

Connecting a PS3 controller to PlayStation 4 or 5

You can use a PS3 controller on a PlayStation 4 or 5, though the newer consoles work better with their own controllers. To connect it, plug the PS3 controller into the console using a micro-USB cable. The console will recognize it and you can use it when ready while it is plugged in.

To use the controller wirelessly on PS4 or PS5, you must first pair it through USB. Plug it in and let the console recognize it for about a minute. Then unplug the cable, press the PlayStation button on the controller, and it should connect wirelessly. If it does not, plug it back in and try the pairing process again.

Note that some PS4 and PS5 games do not support PS3 controllers, even after pairing. The newer consoles prefer their own DualShock 4 or DualSense controllers. If a game will not recognize your PS3 controller, you may need to use the console's native controller instead.

What to do if the controller will not connect

If your PS3 controller stops responding or will not pair, the battery is usually the problem. Plug the controller into a USB power source and let it charge for 20 to 30 minutes. A completely dead battery can take longer. Once it has some charge, try connecting again.

If the controller still will not connect after charging, try unpairing it and starting over. On Windows or Mac, go to your Bluetooth settings and remove the controller from your paired devices list. Then plug it in with the USB cable again and let the device recognize it fresh. This resets the pairing and usually solves connection problems.

If the controller connects but the buttons do not respond, the issue is usually with the game or app you are using, not the controller itself. Try opening a different game or app to see if the controller works there. If it does, the first app may not support PS3 controllers.

Keeping your PS3 controller working

PS3 controllers have rechargeable batteries inside. Charge them regularly by plugging them into any USB power source — a computer, phone charger, or wall adapter all work. You do not need the original PlayStation 3 console to charge them. A full charge usually lasts 8 to 10 hours of active use.

Store the controller in a cool, dry place when you are not using it. Extreme heat or moisture can damage the battery and the electronics inside. If you will not use the controller for more than a month, charge it to about 50 percent and store it in a drawer or closet. This keeps the battery healthy for longer.

The rubber grips on PS3 controllers can wear down or become sticky over time, especially if you use them frequently. You can replace the grips with aftermarket ones sold online, or clean the existing grips with a slightly damp cloth and mild soap if they are just dirty.

Frequently Asked Questions

Can I use a PS3 controller on my iPhone or iPad?

No. PS3 controllers use a Bluetooth standard that iPhones and iPads do not support. You would need a controller designed for iOS, such as an MFi controller or a newer PlayStation controller. Android devices work with PS3 controllers because Android supports the same Bluetooth standard.

Do I need to pair the controller every time I use it?

No. Once you pair a PS3 controller to a device using the USB cable, it stays paired. The next time you turn on the controller and your device, they will connect automatically as long as Bluetooth is on. You only need to pair it again if you remove it from your device's Bluetooth settings or if the pairing fails.

Can I connect one PS3 controller to multiple devices at the same time?

No. A PS3 controller can only connect to one device at a time. If you want to use it on a different device, you must disconnect it from the first one. On most devices, this happens automatically when you turn off Bluetooth or move out of range.

What if my PS3 controller has a broken USB port?

If the micro-USB port is damaged, you cannot charge the controller or pair it using a cable. You may be able to pair it wirelessly on Android devices if the battery still has charge, but you will not be able to recharge it. The controller would need to be repaired or replaced.

Why does my PS3 controller keep disconnecting?

Disconnections usually happen because the battery is low or because something is blocking the Bluetooth signal. Charge the controller fully and move closer to your device. If it still disconnects, try unpairing and repairing it using the USB cable method for your device type.