The fastest way to connect a Switch controller

A Nintendo Switch controller connects wirelessly through a process called pairing. The first time you use a controller, you hold a button on it until the console recognizes it — this takes about 10 seconds. After that, the controller connects automatically whenever you turn on your Switch, the same way your phone connects to a familiar Wi-Fi network.

You do not need a USB cable, a code, or any setup software. The controller and console talk to each other directly. If a controller stops connecting, you can force it to pair again by repeating the same button-hold process.

The steps differ slightly depending on whether you are pairing a Joy-Con (the small controllers that come with the Switch), a Pro Controller (the full-size gamepad), or an older controller from a previous Nintendo console. All three methods are covered below.

Key Takeaways

  • Joy-Cons pair by pressing the sync button on the back of each controller for three seconds while the Switch is awake.
  • A Pro Controller pairs by holding the sync button on top for three seconds until the controller lights flash.
  • Once paired, a controller reconnects automatically — you do not need to pair it again unless it stops responding.
  • If a controller will not pair, restart the Switch, move closer to it, and check that the controller's battery is not completely dead.
  • You can pair up to eight controllers to one Switch, though only four can be used in a game at the same time.

Pairing Joy-Con controllers for the first time

Joy-Cons are the two small controllers that come attached to the sides of your Switch. To pair them, you first need to detach them from the console. Slide each one away from the center until it clicks free.

Once detached, wake up your Switch by pressing any button. On the home screen, go to System Settings (the gear icon at the bottom left). Scroll down and tap Controllers and Sensors, then select Change Grip/Order.

On the next screen, you will see a large image of a Joy-Con. On the back of the physical Joy-Con you want to pair, find the small sync button (it looks like a tiny circle). Press and hold it for three seconds. The Joy-Con will vibrate and its lights will flash. When the lights stop flashing and stay on, it is paired.

Repeat this process for the second Joy-Con if you want to use both. You can now attach them back to the sides of the console or use them separately.

Pairing a Pro Controller

The Pro Controller is a larger, traditional gamepad that many players prefer for handheld or docked play. It pairs the same way as Joy-Cons but from a different location on the controller.

With your Switch awake, go to System Settings and then Controllers and Sensors > Change Grip/Order. On the back of the Pro Controller, near the top center, you will find the sync button — a small recessed circle. Press and hold it for three seconds. The controller's lights will flash, then settle into a steady glow when pairing is complete.

If you have multiple Pro Controllers, pair them one at a time. Each will be assigned a player number (1, 2, 3, etc.) based on the order you pair them.

Connecting controllers to other devices

Joy-Cons and Pro Controllers can also connect to a PC, Mac, or Android phone, though the process is different from pairing with a Switch. These devices do not have a dedicated pairing menu — instead, they use your operating system's standard Bluetooth settings.

On a Windows PC, go to Settings > Bluetooth & devices > Add device. On a Mac, open System Settings > Bluetooth. On Android, go to Settings > Connected devices > Pair new device. Then press the sync button on your controller for three seconds, just as you would with a Switch. The controller will appear in the list of available devices — tap it to connect.

Once connected to a PC, Mac, or phone, the controller will reconnect automatically when you turn it on, as long as Bluetooth is enabled on that device. You can pair the same controller to multiple devices, but it can only connect to one at a time.

What to do when a controller will not pair

If you press the sync button and nothing happens, start with the simplest fixes. First, make sure the controller has battery. Joy-Cons and Pro Controllers charge via USB-C cable — plug one in for at least 30 minutes and try again. A completely dead controller will not pair.

Next, restart your Switch. Hold the power button on the top of the console for 10 seconds until it shuts down completely, then press the power button again to turn it back on. Once the home screen appears, try pairing the controller again.

If the controller still will not pair, move it closer to the Switch — wireless connections work better within three feet. If you have other controllers already paired, disconnect them temporarily by going to System Settings > Controllers and Sensors > Disconnect Controllers. Sometimes too many devices nearby can interfere.

If none of these steps work, the controller may have a hardware problem. Try pairing it to a different Switch if you have access to one. If it fails on another console, the controller itself likely needs repair or replacement.

How many controllers you can pair at once

Your Switch can remember up to eight paired controllers. This is useful if you have a household with multiple people, each with their own controller — they all stay paired and reconnect automatically.

However, only four controllers can be active at the same time during gameplay. If you try to use a fifth controller, the oldest one will disconnect. For most games and situations, this is not a problem, but it matters if you want to play four-player games with a fifth person waiting to join.

You can see which controllers are currently paired by going to System Settings > Controllers and Sensors. To remove a controller from the paired list, select it and choose Disconnect.

Pairing older Nintendo controllers

If you have a controller from a Nintendo Wii, Wii U, or GameCube, you can pair some of them to your Switch, though not all games support them. The Wii Remote and Wii U Pro Controller both pair through the same Change Grip/Order menu — press the sync button on the back of the older controller, and it will appear in the list.

GameCube controllers require an adapter (sold separately) and work only with games that specifically support them, mainly Super Smash Bros. Ultimate. Check the game's manual or the Nintendo eShop page to see if your older controller will work before you pair it.

Frequently Asked Questions

Do I have to pair my Joy-Cons every time I use my Switch?

No. Once you pair a Joy-Con or Pro Controller, it stays paired. The next time you turn on your Switch, the controller will connect automatically without any action from you. You only need to pair again if the controller stops responding or if you want to use it with a different device.

Can I use a Switch controller on my phone or computer?

Yes. Joy-Cons and Pro Controllers work with most phones and computers through Bluetooth. Use your device's standard Bluetooth settings to pair them, the same way you would pair wireless headphones. Not all games support controllers, so check before you buy.

What if my controller is paired but will not respond during a game?

First, check the battery — a low battery can cause lag or disconnection. If the battery is fine, move closer to the Switch. If the problem continues, disconnect the controller from System Settings and pair it again. If it still does not work, restart the Switch.

Can two people use the same controller?

Not at the same time. Each controller is paired to one person's profile. If you want two people to play together, you need two separate controllers. You can pair up to eight controllers to one Switch.

Why does my controller keep disconnecting?

Low battery is the most common cause — charge the controller fully. If the battery is full, try moving closer to the Switch and away from other wireless devices like microwaves or routers. If disconnections continue, restart the Switch and re-pair the controller. Persistent disconnections may indicate a hardware problem.