The PS5 controller connects to your PC through Bluetooth in three main steps: put the controller in pairing mode, open your PC's Bluetooth settings, and select the controller from the list of available devices.
The PlayStation 5 DualSense controller uses standard Bluetooth 5.0, which every modern PC supports. You do not need special software or drivers — Windows and most Linux distributions recognize it automatically once paired. The process takes about two minutes the first time, and after that your PC will remember the controller and reconnect it whenever both devices are in range.
One thing to know upfront: the PS5 controller works best for games that already support it by name. Many games recognize it as a generic gamepad and map buttons differently than you might expect. If a game was built for Xbox controllers, the button layout will feel backwards. You can remap buttons in some games' settings, or use third-party software like DS4Windows to change how the controller talks to your PC — but that adds a step most people do not need.
Key Takeaways
- Hold the PS button and the Create button together for three seconds to put your DualSense controller into pairing mode; the light bar will flash white when it is ready.
- Open Settings > Bluetooth & devices > Add device on Windows 11, or Settings > Devices > Bluetooth on Windows 10, and select your controller from the list.
- Once paired, your controller will reconnect to your PC automatically each time you turn it on, as long as Bluetooth is enabled on both devices.
- Games built for PlayStation controllers will recognize all the buttons and features correctly; games built for Xbox controllers may map buttons in unexpected ways.
- If your controller does not appear in the Bluetooth list, restart both the controller and your PC, then try pairing again.
How to put your DualSense controller into pairing mode
Press and hold the PS button (the one with the PlayStation symbol) and the Create button (to the left of the touchpad) at the same time. Hold them both down for about three seconds. You will see the light bar on the back of the controller start flashing white — that means it is in pairing mode and looking for a device to connect to.
The controller will stay in pairing mode for about one minute. If the light stops flashing or turns off, the controller has timed out and you will need to repeat this step. This is normal — just hold the two buttons again until the white flashing comes back.
Finding and selecting your controller in Windows Bluetooth settings
On Windows 11: Open Settings (press the Windows key and type "Settings"). Go to Bluetooth & devices, then click "Add device" at the top. A window will open showing available Bluetooth devices. You should see "Wireless Controller" in the list — that is your DualSense. Click it to pair.
On Windows 10: Open Settings, go to Devices, then select Bluetooth & other devices from the left menu. Click "Add Bluetooth or other device" and choose Bluetooth. Again, look for "Wireless Controller" in the list and click it.
Windows will show a brief message saying the device is pairing, then another saying it is ready to use. The light bar on your controller will stop flashing and settle into a steady glow. Your PC now remembers this controller.
What happens after your controller is paired
Once paired, your DualSense will reconnect to your PC automatically whenever you turn it on — as long as Bluetooth is enabled on your PC. You do not have to pair it again. If you want to use the same controller with your PS5 and your PC, you can pair it with both; just hold the PS button to turn it on, and it will connect to whichever device it was last used with.
If your PC goes to sleep or you turn off Bluetooth, the controller will disconnect. Turning the controller off and back on, or re-enabling Bluetooth on your PC, will reconnect it within a few seconds.
Why some games do not recognize all your controller's features
Games built specifically for PlayStation (like games that say "PlayStation 5 controller supported") will recognize your DualSense perfectly — the haptic feedback, the adaptive triggers, the touchpad, all of it. But many PC games were built only for Xbox controllers, and they do not know what to do with PlayStation buttons.
When this happens, Windows treats your DualSense as a generic gamepad and maps the buttons to Xbox positions. So the triangle button might register as Y, the circle button as B, and so on. The game will work, but the button layout will feel wrong if you are used to PlayStation. You can usually remap buttons inside the game's settings menu, or you can use software like DS4Windows to remap them at the system level.
Troubleshooting when your controller will not appear or will not stay connected
If your controller does not show up in the Bluetooth list, first make sure it is actually in pairing mode — the light bar should be flashing white. If it is not, hold the PS and Create buttons again for three seconds. If the light is flashing but your PC still does not see it, restart your PC and try again. Sometimes the Bluetooth radio needs a fresh start.
If your controller pairs but then disconnects a few seconds later, or if it pairs but games do not recognize it, restart both your controller and your PC. Turn off the controller completely (hold the PS button and select Power Off), wait five seconds, then turn it back on. On your PC, go to Bluetooth settings, remove the controller from your paired devices list, and pair it again from scratch.
If you have multiple Bluetooth devices nearby — headphones, a mouse, another controller — they can sometimes interfere. Try pairing in a room away from other wireless devices, or temporarily turn off other Bluetooth devices while you pair the controller.
Using your controller with specific games and software
Steam recognizes DualSense controllers natively. If you launch a game through Steam, it will detect your controller automatically. Some games have a setting to choose between controller types — look in the game's control or input settings and select PlayStation or DualSense if that option exists.
For games outside Steam, or for games that do not recognize your controller, DS4Windows is a free tool that lets you remap buttons and customize how the controller behaves. It runs in the background and translates your DualSense inputs into whatever format the game expects. This is optional — many people play fine without it — but it solves the button-mapping problem if a game does not support PlayStation controllers.
Frequently Asked Questions
Can I use my PS5 controller on PC and PS5 without re-pairing every time?
Yes. Pair the controller with both devices once. When you turn the controller on, it will connect to whichever device it was last used with. If you want to switch, just hold the PS button and the device will recognize it. You do not have to unpair or re-pair.
Why does my controller disconnect when my PC goes to sleep?
Bluetooth disconnects when your PC sleeps to save power. When you wake your PC, turn the controller off and back on, or press any button on the controller, and it will reconnect within a few seconds. This is normal behavior.
Do I need to install drivers or software to use my PS5 controller on PC?
No. Windows 10 and 11 recognize the DualSense controller automatically once it is paired. You do not need to read anything. If you want to remap buttons or customize the controller's behavior, you can use optional software like DS4Windows, but it is not required.
What if my PC does not have Bluetooth?
Most modern PCs have Bluetooth built in, but some older desktops do not. If your PC does not have Bluetooth, you can buy a USB Bluetooth adapter (they cost $10 to $30) and plug it into a USB port. Your PC will treat it like built-in Bluetooth, and you can pair your controller the same way.
Can I use a wired connection instead of Bluetooth?
Yes. Plug your DualSense into your PC with a USB-C cable. Windows will recognize it when ready, and you can use it wired in any game. Wired connection is more reliable for competitive games because there is no wireless latency, but it means you have to stay close to your PC.