Connect via Bluetooth in four steps

The EasySMX controller connects to your Mac through Bluetooth wireless. Turn on the controller, hold the Bluetooth pairing button (usually marked with a Bluetooth symbol) for three to five seconds until the light flashes, then go to System Settings on your Mac, select Bluetooth, and click the EasySMX controller when it appears in the list. Your Mac will pair with it automatically — you do not need to enter a code.

Once paired, the controller will reconnect to your Mac whenever both devices are on and within range. You can use it when ready in games that support game controllers, including Steam, Epic Games, and many titles on the Mac App Store. If the controller does not appear in your Bluetooth list, make sure it is charged and try the pairing button again.

Key Takeaways

  • EasySMX controllers pair through Bluetooth by holding the pairing button until the light flashes, then selecting the controller in System Settings.
  • Your Mac must have Bluetooth enabled and be within 30 feet of the controller for pairing to work.
  • After pairing once, the controller reconnects automatically whenever you turn it on and open a game that supports controllers.
  • If the controller does not work in a game, check that the game itself supports external controllers — not all Mac games do.

Charge the controller before pairing

EasySMX controllers ship with a USB cable for charging. Plug the cable into the charging port on the controller (usually on the bottom or back) and connect it to any USB power adapter or your Mac's USB port. A full charge takes about two to three hours. The controller will have a low battery light or indicator when it needs charging — do not try to pair a dead controller, as it will not stay connected.

Check the battery level before you start gaming. Most EasySMX controllers show battery status through a light on the device itself or through your Mac's Bluetooth menu once paired. If the controller disconnects during use, charge it fully before troubleshooting further.

Make sure Bluetooth is on and discoverable

Your Mac must have Bluetooth turned on for the controller to pair. Click the Bluetooth icon in the menu bar at the top of your screen — if you do not see one, go to System Settings, click Bluetooth, and toggle it on. The menu bar icon will appear once Bluetooth is active. Your Mac is automatically discoverable to controllers during pairing, so you do not need to change any settings.

If Bluetooth is already on but the controller does not appear, turn Bluetooth off and back on again. Wait 10 seconds between turning it off and on. Then hold the controller's pairing button again and check the list in System Settings.

Use the controller in games and apps

Once paired, the EasySMX controller works in any Mac game or app that supports external controllers. Steam, Epic Games, and many titles on the Mac App Store recognize it automatically — you do not need to configure anything. Launch the game, and the controller should work right away. The buttons map to standard game controller layouts: the left stick moves your character, the right stick controls the camera, and the face buttons (A, B, X, Y) trigger actions.

Some older Mac games do not support controllers at all. If a game does not respond to the controller, check the game's settings menu to see if controller support is an option you need to turn on. If the game has no controller option, it was built for keyboard and mouse only.

Reconnect if the controller drops

If the controller disconnects during use, the simplest fix is to turn it off and back on. Wait a few seconds, then turn it on again — it will reconnect to your Mac automatically if they are still paired. If it does not reconnect, go to System Settings, click Bluetooth, find the EasySMX controller in the list, and click the X or "Forget" button next to it. Then repeat the pairing steps from the beginning.

Disconnections usually happen because the controller ran out of battery, moved out of Bluetooth range, or interference from other wireless devices. Keep the controller within 30 feet of your Mac and away from microwaves, routers, and other 2.4 GHz devices. If disconnections keep happening, try moving closer to your Mac or restarting both devices.

Pair multiple controllers for multiplayer games

You can pair more than one EasySMX controller to your Mac at the same time. Pair the first controller using the steps above, then hold the pairing button on the second controller and add it through System Settings the same way. Both controllers will stay paired and can be used in games that support multiple players. Each controller connects independently, so you can turn one off without affecting the other.

Some games let you set which controller is Player 1 and which is Player 2 in their settings menu. Check the game's controller or input settings if you need to assign controllers to specific players.

Frequently Asked Questions

Why does my EasySMX controller not show up in Bluetooth settings?

The controller is likely off or out of battery. Charge it fully using the USB cable, then hold the pairing button for three to five seconds until the light flashes. Make sure your Mac's Bluetooth is on and try again. If it still does not appear, restart your Mac and repeat the pairing process.

Can I use the EasySMX controller with my Mac and another device at the same time?

No. Once paired to your Mac, the controller connects only to your Mac. To use it with another device like an iPhone or PC, you must unpair it from your Mac first. Go to System Settings, click Bluetooth, find the controller, and click Forget. Then pair it with the other device.

Does the EasySMX controller work with all Mac games?

No. Only games built to support external controllers will work with it. Most modern games on Steam and the Mac App Store do support controllers, but older games and some indie titles may require a keyboard and mouse instead. Check the game's system requirements or settings menu to see if controller support is available.

What should I do if the controller buttons are not mapped correctly?

Most games map buttons automatically, but some let you customize controls in their settings menu. Open the game's input or controller settings and look for a button remapping option. If the game has no remapping feature, the button layout is fixed and cannot be changed.

Can I use the EasySMX controller while it is charging?

Yes. You can play while the controller charges via USB cable, though this limits your movement range to the cable length. For wireless play, charge it fully first, then disconnect the cable before gaming.