Connect the Switch dock to your TV with an HDMI cable
The Nintendo Switch connects to a TV through the dock that comes in the box. The dock has an HDMI port on the back. Plug one end of an HDMI cable into that port, and plug the other end into any HDMI input on your TV. Turn on the TV and switch to the correct HDMI input — your TV remote has an input or source button that cycles through HDMI 1, HDMI 2, and so on. The Switch screen should appear on your TV within a few seconds.
You do not need a special HDMI cable. Any standard HDMI cable works, including ones you may already own from a Blu-ray player, streaming device, or older game console. The Switch comes with an HDMI cable in the box, so most people never need to buy one.
Key Takeaways
- Plug an HDMI cable into the port on the back of the Switch dock, then into any HDMI input on your TV.
- Switch your TV to the correct HDMI input using the remote's input or source button.
- Slide the Switch into the dock with the screen facing toward you — the dock holds it upright while you play.
- If the TV shows no picture, check that the HDMI cable is fully inserted on both ends and that you selected the right input.
- You can play in handheld mode, tabletop mode with the kickstand, or docked mode on the TV — the Switch works all three ways.
Slide the Switch into the dock the right way
The dock is a plastic stand with a USB-C port at the bottom and an HDMI port at the back. The Switch slides into the dock from the top. Hold the Switch with the screen facing toward you and the kickstand facing away from you. Line up the USB-C connector on the bottom of the Switch with the USB-C port inside the dock, then slide the Switch down into the dock until it clicks into place. The screen should still face you when the Switch is fully seated.
The dock charges the Switch while it sits there. You do not have to remove the Switch to charge it — just leave it in the dock and plug the power adapter into a wall outlet. The power adapter connects to the USB-C port at the bottom of the dock.
Check your HDMI cable and TV input if there is no picture
If you plug everything in and the TV stays blank, start with the HDMI cable. Unplug it from both the dock and the TV, wait five seconds, and plug it back in firmly. Push until you feel it click. A loose connection is the most common reason the picture does not appear.
Next, check that you are on the right HDMI input. Press the input or source button on your TV remote — it is usually near the top or side. Cycle through the inputs until you see the Switch home screen. If your TV has multiple HDMI ports, try a different one. Some ports work better than others, and occasionally a port stops working.
If you still see no picture, try a different HDMI cable if you have one. A damaged cable is rare but possible. If a different cable works, the original cable is faulty and you can replace it.
Use the dock, kickstand, or handheld mode depending on where you play
The Switch works three ways. Docked mode is what you just set up — the Switch sits in the dock and displays on the TV. Tabletop mode uses the kickstand on the back of the Switch to prop it up on a table or desk, and you play with the Joy-Con controllers detached. Handheld mode means you hold the Switch itself, with the Joy-Con controllers attached to the sides, and play on the built-in screen.
You can switch between these modes anytime. If you are playing docked and want to take the Switch with you, just lift it out of the dock. The game keeps running on the handheld screen. When you come back and slide it into the dock, the game moves to the TV. There is no delay or restart — the Switch handles the switch between screens when ready.
Connect controllers if the Joy-Cons are not attached
The Switch comes with two Joy-Con controllers attached to the sides of the screen. In docked or tabletop mode, you can detach them and hold them separately, or you can buy a Pro Controller, which is a full-sized gamepad that connects wirelessly.
To detach a Joy-Con, press the small button on the back of the controller and slide it away from the Switch. To reattach it, line up the rail on the side of the Switch and slide the Joy-Con back on until it clicks. If you are using a Pro Controller or a different wireless controller, press the sync button on the controller — it is usually on the back or bottom — and the Switch will find it within a few seconds. You do not need to plug anything in; wireless controllers connect over Bluetooth.
Adjust picture settings if the image looks wrong on your TV
Most TVs display the Switch picture correctly without any changes. If the image looks stretched, cut off at the edges, or has black bars on the sides, check your TV's picture settings. Look for an option called aspect ratio, zoom, or picture size. Set it to fit the screen or auto. This tells the TV to display the full Switch picture without stretching or cropping it.
If the picture looks blurry or the colors seem off, the HDMI cable may be loose again. Unplug and reseat it. If that does not help, try a different HDMI port on the TV. Some ports have better signal quality than others, especially on older TVs.
Frequently Asked Questions
Can I use any HDMI cable with the Switch?
Yes. Any standard HDMI cable works, whether it is brand new or one you already own from another device. The Switch does not need a special gaming cable. The one that comes in the box is fine, but if you lose it or need a longer one, any HDMI cable from a hardware store or online retailer will work.
Do I need to buy a Pro Controller to play on the TV?
No. The two Joy-Con controllers that come with the Switch work perfectly in docked mode. You can hold them separately, attach them to a grip accessory, or use them as individual controllers for two-player games. A Pro Controller is optional and costs extra, but it is not required.
What if my TV does not have an HDMI port?
Most TVs made in the last ten years have at least one HDMI port. If your TV is older and has only composite or component inputs, you would need an HDMI-to-composite converter, which is inexpensive but adds an extra step. For the best experience, using a TV with HDMI is recommended.
Can I play while the Switch is charging in the dock?
Yes. The dock charges the Switch while it sits there, and you can play on the TV the entire time. The Switch does not need to be fully charged to play — it starts charging as soon as it is in the dock, even if the game is running.
Why does my TV say no signal even though everything is plugged in?
The most common cause is selecting the wrong HDMI input on your TV. Press the input or source button on your remote and cycle through each HDMI port until the Switch picture appears. If that does not work, unplug the HDMI cable from both ends, wait a few seconds, and plug it back in firmly. A loose connection is the second most common cause.