What Check Disk does and when to run it

Check Disk is a Windows tool that scans your hard drive for errors and can fix many of them automatically. It looks for two types of problems: physical damage to the disk itself and logical errors in how Windows has organized your files. When you run Check Disk, Windows marks bad sectors so your computer stops trying to use them, and it repairs broken file system structures that might cause crashes or lost files.

Run Check Disk if your computer is freezing, if files are disappearing or becoming unreadable, if you see error messages about corrupted files, or if you've had an unexpected shutdown (like a power failure) while the computer was running. You should also run it before you back up a drive you suspect has problems — there's no point copying errors to your backup.

Check Disk takes time to complete, anywhere from a few minutes on a small, healthy drive to several hours on a large drive with many errors. Plan to run it when you don't need your computer for other work.

Key Takeaways

  • Check Disk scans for physical damage and file system errors, and can repair many problems without losing your files.
  • You can run a basic scan without restarting, but fixing errors usually requires Windows to restart and run Check Disk before the system fully loads.
  • The scan takes longer on larger drives and drives with existing errors, so plan for several hours if your drive is over 500 GB.
  • If Check Disk finds uncorrectable errors, back up your remaining files when ready and consider replacing the drive.

Running Check Disk from Settings (no restart required)

The quickest way to start is through Windows Settings, which lets you schedule a scan without stopping your work when ready. Open Settings by pressing the Windows key and typing "Settings", then click the Settings app. Go to System in the left sidebar, then scroll down and click Storage.

Under Storage, click Advanced storage options, then Disk and volumes. Find the drive you want to scan in the list — usually C: for your main drive — and click it. Scroll down to find Scan and fix and click that button. Windows will ask if you want to scan now or schedule it for the next restart. Choose Scan and fix to schedule it. Your computer will scan the drive the next time you restart, before Windows fully loads.

If you choose to scan now instead, Windows will run a read-only scan that checks for errors but cannot fix them while you're using the drive. This is useful for seeing whether problems exist, but you'll still need to schedule a full repair scan for the next restart if errors are found.

Running Check Disk from Command Prompt (for more control)

Command Prompt gives you more options and lets you see detailed information about what Check Disk finds. Right-click the Windows Start button and select Terminal (Admin) or Command Prompt (Admin) — if you see a User Account Control prompt asking for permission, click Yes.

Type this command and press Enter: chkdsk C: /F /R. Replace the C: with the drive letter you want to scan (you can see your drive letters in File Explorer). The /F tells Check Disk to fix errors it finds, and the /R tells it to locate bad sectors and recover readable information. Windows will ask if you want to schedule the scan for the next restart — type Y and press Enter.

If you want to scan without fixing anything first (to see what's wrong before making changes), use chkdsk C: without the /F or /R flags. This runs when ready and shows you what errors exist. You can then decide whether to run the full repair.

What happens during the scan and what to expect

When you restart your computer after scheduling Check Disk, you'll see a black screen with white text before Windows loads. This is Check Disk running. It will show you its progress — usually a percentage and a list of what it's checking (file records, index entries, security descriptors, and so on). Do not turn off your computer during this process, even if it seems to be taking a very long time.

On a 1 TB drive with no errors, the scan typically takes 10 to 30 minutes. On a 2 TB or larger drive, or on a drive with many errors, it can take 2 to 4 hours. If your drive is nearly full, the scan may take even longer. There's no way to speed this up — Check Disk must check every sector.

When the scan finishes, you'll see a summary of what was found and fixed. Common messages include "no errors found", "errors found and fixed", or "bad sectors found". If errors were fixed, Windows will load normally. If bad sectors were found, Check Disk has marked them so Windows won't try to use them again.

What to do if Check Disk finds uncorrectable errors

If Check Disk reports that it found errors it could not repair, your drive has physical damage that's beyond what the tool can fix. This doesn't mean your drive is completely dead — it means some sectors are genuinely damaged and unreadable. Windows will continue to work, but the damaged areas are now off-limits.

Back up your files when ready to an external drive or cloud storage. Don't wait for the next problem. Use File Explorer to copy your important documents, photos, and other files to a backup location. If the drive is so damaged that you can't copy files, try connecting it to another computer as an external drive — sometimes a different computer can read sectors that the original computer cannot.

After you've backed up what you can, consider replacing the drive. A drive with physical damage will likely develop more problems over time. If the drive is still under warranty, contact the manufacturer with the Check Disk report — most will replace a drive that shows physical errors.

Preventing errors and knowing when to replace your drive

You can reduce the chance of errors by shutting down your computer properly instead of forcing it off, by using a surge protector to prevent power spikes, and by keeping your computer in a cool, dry place. Overheating is one of the most common causes of hard drive failure, so make sure your computer's vents aren't blocked and that it has good airflow.

If Check Disk finds and fixes errors repeatedly — more than once every few months — your drive is probably failing. Even if it fixes the errors each time, a drive that keeps developing problems is unreliable and should be replaced before it fails completely. A healthy drive should go years without errors.

Solid-state drives (SSDs) rarely develop the kind of errors that Check Disk fixes, so if you're using an SSD and Check Disk reports errors, the drive is likely failing and should be replaced soon.

Frequently Asked Questions

Can I use my computer while Check Disk is running?

No. Check Disk runs before Windows fully loads, so your computer is not usable during the scan. This is why it's important to schedule it when you don't need your computer. If you try to interrupt it by restarting, you may corrupt your drive further.

What's the difference between /F and /R in the command?

/F fixes logical errors in the file system — things like broken file records. /R finds bad sectors and recovers data from them. You should use both together (/F /R) to get the most thorough repair. Using only /F will miss physical damage.

Do I need to run Check Disk on an external drive the same way?

Yes, the process is the same. In Command Prompt, use the external drive's letter (often D: or E:) instead of C:. You can also right-click the external drive in File Explorer, select Properties, go to the Tools tab, and click Check. This is often easier for external drives.

Will Check Disk delete my files?

No. Check Disk repairs the structure that holds your files, not the files themselves. In rare cases, if a file is stored in a damaged sector, Check Disk may move it to a recovery folder, but it won't delete it. Your files are safer after Check Disk runs than they were before.

What should I do if Check Disk gets stuck on one percentage?

If Check Disk hasn't moved in over an hour, your drive may have a serious hardware problem. Let it run for at least two hours before giving up — very damaged drives can take a long time. If it's truly stuck after several hours, force a restart by holding the power button for 10 seconds, then try again. If it gets stuck in the same place twice, the drive likely needs replacement.