Format a USB drive on your Mac by connecting it, opening Disk Utility, selecting the drive, and choosing a file system

To format a USB drive on a Mac, you plug it in, open Disk Utility (found in Applications > Utilities), click the drive name in the left sidebar, click the Erase button, choose a file system, and confirm. The whole process takes about two minutes. The file system you pick determines what devices can read the drive afterward — APFS and Mac OS Extended work only on Macs, while exFAT works on both Macs and Windows computers.

Formatting erases everything on the drive permanently, so move any files you want to keep to your Mac first. Once you start the erase process, you cannot stop it or recover the files.

Key Takeaways

  • Formatting a USB drive on a Mac takes about two minutes and permanently deletes all files on it, so back up anything you need first.
  • APFS is the fastest option if you only use Macs, while exFAT lets the drive work on both Macs and Windows computers.
  • Disk Utility is the built-in Mac tool for formatting — you do not need to read anything.
  • If your drive does not appear in Disk Utility, try a different USB port or restart your Mac.

Choose the right file system before you erase

The file system is the format that organizes data on the drive. Your choice matters because it determines which devices can use the drive later. APFS (Apple File System) is the newest Mac format and the fastest option if you only plan to use the drive with Macs. Mac OS Extended (also called HFS+) is older but still works on all Macs and is useful if you have an older Mac you need to connect the drive to.

exFAT is the choice if you need the drive to work on both Macs and Windows computers. It is slower than APFS but compatible with both systems. If you are not sure which one to pick, exFAT is the safest bet because it works everywhere.

Do not choose NTFS (Windows only) or FAT32 (very old, limited to 4 GB files) unless you have a specific reason. Most people should pick either APFS (Mac only) or exFAT (Mac and Windows).

Back up your files before formatting

Formatting erases every file on the drive with no way to recover them afterward. Before you start, copy any files you want to keep to your Mac's hard drive or another external drive. Drag the files from the USB drive to a folder on your Mac, or use Finder to move them.

If you have already lost files on the drive and want to recover them, do not format it yet — take it to a data recovery service first. Once you erase the drive, recovery becomes much harder and more expensive.

Open Disk Utility and select your USB drive

Plug the USB drive into any USB port on your Mac. Open Finder, click Applications in the sidebar, then double-click Utilities. Find Disk Utility and double-click it to open the program.

In the left sidebar of Disk Utility, you will see a list of drives. Click the name of your USB drive — it usually shows the brand name or a generic name like "USB Drive". Do not click the indented item below it (that is a partition, not the whole drive). If you do not see your drive listed, try plugging it into a different USB port, or restart your Mac and try again.

Erase the drive and choose your format

With your USB drive selected in the sidebar, click the Erase button at the top of the Disk Utility window. A dialog box will appear asking for a name, a format, and a scheme.

Type a name for the drive in the Name field — this is what the drive will be called when it appears on your desktop. Keep it short and avoid special characters. For the Format dropdown, select APFS (if you only use Macs), Mac OS Extended (if you have older Macs), or exFAT (if you need Windows compatibility). Leave the Scheme set to GUID Partition Map unless you have a specific reason to change it.

Click Erase. Disk Utility will warn you that all data will be erased. Click Erase again to confirm. The process usually takes 30 seconds to two minutes depending on the drive size.

Verify the drive is ready to use

When the erase finishes, the drive name will appear on your Mac's desktop and in Finder. Click on it to open it — it should be empty. You can now copy files to the drive by dragging them into the window or using copy and paste.

If the drive does not appear on your desktop after formatting, try unplugging it and plugging it back in. If it still does not show up, the drive may be damaged. Try formatting it again, or if that does not work, the drive may need replacement.

Troubleshoot if the drive will not format

If Disk Utility shows an error when you try to erase, the drive may be write-protected or damaged. Check the physical drive for a small switch or slider — some USB drives have a lock switch that prevents writing. If there is a switch, slide it to the unlocked position and try again.

If there is no switch and you still get an error, try a different USB port on your Mac. If the drive still will not format, it may be failing. You can try formatting it on a Windows computer to see if the problem is specific to your Mac, but if it fails on both systems, the drive is likely damaged and should be replaced.

Frequently Asked Questions

What is the difference between APFS and exFAT?

APFS is faster and newer but only works on Macs. exFAT is slower but works on both Macs and Windows computers. If you only use Macs, pick APFS. If you share the drive with Windows users, pick exFAT.

Can I recover files after I format the drive?

Recovery is possible when ready after formatting if you do not write new files to the drive, but it requires special software and is not may provide. The longer you wait or the more you use the drive, the harder recovery becomes. If you need files back, stop using the drive and contact a data recovery service.

Why does my USB drive not show up in Disk Utility?

Try plugging it into a different USB port — some ports are faster or more reliable than others. If it still does not appear, restart your Mac and try again. If the drive still does not show up, it may be damaged or not recognized by your Mac.

Do I need to eject the drive after formatting?

You should eject the drive before unplugging it to avoid corrupting files. Click the eject icon next to the drive name in Finder, or right-click the drive and select Eject. Wait for the drive to disappear from your desktop before unplugging it.

Can I format a USB drive that is currently my Mac's startup disk?

No — you cannot format the drive your Mac is running from. If you accidentally try, Disk Utility will not let you. Restart your Mac from a different drive or use Recovery Mode if you need to erase your startup drive.