The safest way to move files between drives

Moving files from one drive to another is straightforward if you do it in the right order: copy everything first, verify it arrived, then delete the original. This three-step approach means you will never lose data if something interrupts the move halfway through.

The reason to copy before deleting is straightforward. If you try to move files directly and the process stops — your computer crashes, the cable disconnects, the drive runs out of space — the files end up nowhere. By copying first, you always have a backup on the original drive until you confirm the new copy works.

On Windows, use File Explorer. On Mac, use Finder. Both let you drag files between drives, and both will copy rather than move when the destination is a different physical drive. This is the safest method for most people because you can see exactly what is happening.

Key Takeaways

  • Copy files to the new drive first, then delete from the old one only after you have confirmed the copies are there and readable.
  • Dragging files between different physical drives in File Explorer or Finder copies them automatically, which is what you want.
  • Check that file counts match and open a few files on the new drive before you delete anything from the original.
  • External drives and cloud storage count as different drives, so the same copy-first method works for moving to those destinations too.
  • If the move is interrupted, restart it from where it stopped — most operating systems will skip files that already copied successfully.

Copying files on Windows

Open File Explorer and navigate to the drive or folder containing the files you want to move. On the left side, you will see a list of drives under "This PC". Locate the files, then right-click and select "Copy".

Now navigate to the destination drive in the left panel and right-click in the empty space. Select "Paste". Windows will begin copying. If you have a large number of files, this can take several minutes or longer depending on file size and drive speed. Do not unplug anything or close File Explorer while the copy is running.

Once the paste finishes, stay in the destination folder and count the files or check the total size. Compare this to what you copied from the original drive. If the numbers match, open a few files to make sure they work. Only then go back to the original drive and delete the files.

Copying files on Mac

Open Finder and locate the files you want to move. Select them by clicking the first file, then holding Shift and clicking the last file to select a range, or by holding Command and clicking individual files. Once selected, press Command+C to copy.

Navigate to the destination drive in the Finder sidebar and press Command+V to paste. Finder will copy the files and show a progress window if the operation takes more than a few seconds. Wait for it to finish completely before moving on.

After the paste finishes, check that the files are there by looking at the file count or total size. Open a couple of files to confirm they work properly. Then go back to the original location and delete the files by selecting them and pressing Command+Delete.

What to do if the copy gets interrupted

If your computer crashes, loses power, or you accidentally close the window during a copy, do not panic. The files that copied successfully are still on the destination drive. The ones that did not finish copying are still on the original drive.

Restart the copy process. Both Windows and Mac will skip files that are already on the destination drive, so you will only copy the remaining files. This means you can safely restart without duplicating what already arrived.

If you are not sure which files finished copying, check the destination drive and count them or look at the total size. Then copy again from the original location — the operating system will handle the duplicates automatically.

Moving files to an external drive or cloud storage

External drives like USB flash drives, portable hard drives, and SD cards work the same way as internal drives. Plug in the external drive, let it appear in File Explorer or Finder, then copy files to it using the same method described above. The only difference is speed — external drives are usually slower than internal ones, so the copy will take longer.

Cloud storage services like OneDrive, Google Drive, or Dropbox work differently. Instead of copying files, you upload them to the cloud service. On Windows, you can drag files into your OneDrive folder in File Explorer, and they will upload automatically. On Mac, do the same with your iCloud Drive folder or Google Drive folder. Wait for the upload to finish (you will see a checkmark or sync icon when it is done) before deleting the original files.

Cloud storage is slower than moving between physical drives because it has to upload over the internet. For large files or many files, this can take hours. Start the upload, then check back later to confirm it finished before you delete anything.

Checking that files moved correctly

Before you delete the original files, verify that the new copies work. Open a few files on the destination drive — not the originals. If they open and look correct, the copy was successful. If a file will not open or looks corrupted, the copy may have failed partway through.

For a large folder with many files, you can also compare the file count and total size. In File Explorer on Windows, right-click the folder and select "Properties" to see the total size. On Mac, select the folder and press Command+I to see the same information. If the numbers match between the original and the copy, everything transferred.

If you find that some files did not copy correctly, try copying them again. If a file consistently fails to copy, it may be corrupted on the original drive. In that case, you have a problem with the original file, not with the move process.

Deleting files from the original drive

Once you have confirmed that all files copied successfully and work on the destination drive, you can delete them from the original. Select the files, press Delete on Windows or Command+Delete on Mac, and confirm the deletion.

On Windows, files go to the Recycle Bin first, so you can recover them if you change your mind. On Mac, files go to the Trash. Both will stay there until you empty the bin or trash, which gives you a safety window if you realize you made a mistake.

If the original drive is running out of space and you need that space back when ready, empty the Recycle Bin or Trash right away. Otherwise, you can leave the files there for a few days as a backup before permanently deleting them.

Frequently Asked Questions

Can I move files while I am using them?

No. If a file is open in a program, you cannot delete it from the original drive until you close the program. You can copy it while it is open, but the delete step will fail. Close all programs using the files first, then complete the move.

What if the destination drive does not have enough space?

The copy will fail partway through and tell you the drive is full. Delete some files from the destination drive to make room, then restart the copy. The operating system will skip the files that already copied and only copy the remaining ones.

Is it safe to unplug an external drive while files are copying?

No. Unplugging during a copy can corrupt files on the external drive. Wait for the copy to finish and the progress window to close. On Mac, you can also eject the drive from Finder to make sure it is safe to unplug.

Do I need special software to move files between drives?

No. File Explorer on Windows and Finder on Mac have everything you need. Special software is only useful if you want to schedule moves to happen automatically or move files based on rules, which most people do not need.

What happens if I drag files instead of using copy and paste?

Dragging files between different physical drives copies them, which is what you want. Dragging within the same drive moves them instead. Either way, the result is correct — you just see the progress differently.