The basic path: scan, choose email, enter the address

Most HP printers with a scanner can send scanned documents directly to an email address without a computer. You place the document on the scanner glass or in the automatic feeder, press the Scan or Email button on the printer's touchscreen, select an email address from the printer's address book, and the printer sends the file to that inbox. The whole process takes about two minutes once the printer is set up.

The catch is that your printer must be connected to the internet — either by ethernet cable or Wi-Fi — and you must have already entered at least one email address into the printer's contacts. If your printer has never sent an email before, you will need to configure it first, which takes about ten minutes and happens only once.

Key Takeaways

  • Your HP printer needs an internet connection (Wi-Fi or ethernet) and at least one email address stored in its address book before it can send scanned documents.
  • The scan-to-email button is usually labeled Scan, Email, or a combination of both on the printer's physical control panel or touchscreen.
  • HP printers send scans as PDF or JPEG files depending on your settings, and the file arrives in the recipient's inbox within a few minutes.
  • If the printer cannot send the email, check that it is connected to the internet, that the email address in the address book is correct, and that your printer's firmware is current.

Connecting your printer to the internet

The printer cannot send email without an internet connection. Check whether your printer is already connected by looking at the touchscreen home page — most HP printers display a Wi-Fi icon or ethernet status in the top corner. If you see a Wi-Fi icon with bars or a connected ethernet symbol, your printer is online and you can skip to the next section.

If the printer is not connected, use Wi-Fi if your printer has it. Press the Home button on the touchscreen, then look for Settings, Network, or Wireless. Select your Wi-Fi network name from the list, enter your Wi-Fi password, and wait for the connection to complete — the touchscreen will show "Connected" or a full Wi-Fi icon. If your printer does not have Wi-Fi, connect an ethernet cable from the printer to your router instead.

After the printer connects, it may take a few minutes to finish setting up. Leave it plugged in and do not turn it off during this time. Once the connection is stable, move to setting up the email address.

Adding an email address to the printer's address book

Before the printer can send a scan to email, you must store at least one email address in the printer's contacts. On the touchscreen, press Home, then look for Settings, Scan Settings, or Email Settings — the exact name varies by model. Select "Add Email Address," "Email Contacts," or "Scan to Email Setup."

Enter the email address you want to scan to. Some printers let you type it directly on the touchscreen using an on-screen keyboard. Others may ask you to enter it through the HP printer software on a connected computer instead. If the touchscreen has a keyboard, type slowly and double-check the address — a single wrong letter will cause the scan to fail. Press Save or Confirm when you are done.

You can add multiple email addresses if you want to send scans to different people. Each address takes about a minute to add. Once at least one address is saved, you are ready to scan and send.

Scanning a document and sending it to email

Place your document face-down on the scanner glass, or face-up in the automatic document feeder if your printer has one. Close the scanner lid or feeder cover. On the printer's touchscreen or control panel, look for a button labeled Scan, Email, or Scan to Email — the exact label depends on your model. Press that button.

The printer will show a menu asking where to send the scan. Select the email address from the list you created earlier. The printer may also ask you to choose a file format — PDF is the most common and works for almost everything, but you can select JPEG if you prefer. Press Send or Start, and the printer will scan the document and send it.

The scan usually arrives in the recipient's inbox within a few minutes. If nothing arrives after five minutes, check that the email address is correct and that the printer is still connected to the internet. The printer may also show an error message on the touchscreen if something went wrong — write down the error code and check the HP support website for that specific model.

Changing the file format and scan quality

By default, HP printers send scans as PDF files in standard quality, which works for most documents. If you want to change how the file looks or what format it arrives in, you can adjust these settings before you scan.

On the touchscreen, press Home, then Settings or Scan Settings. Look for options like "File Format," "Image Quality," "Resolution," or "Color Mode." File Format lets you choose between PDF and JPEG — PDF is better for text and keeps multiple pages together, while JPEG is better if you want to edit the image later. Resolution controls how sharp the scan is; higher numbers make larger files but clearer text. Color Mode lets you scan in color, black and white, or grayscale. Make your choices, save the settings, and they will stay the same for future scans unless you change them again.

Troubleshooting when the email does not send

If the printer shows an error or the email never arrives, start with the simplest checks. Verify that the printer is connected to the internet by looking at the Wi-Fi or ethernet icon on the touchscreen. If the connection is lost, reconnect it using the steps in the "Connecting your printer to the internet" section above.

Next, confirm that the email address in the printer's address book is spelled correctly. Go back to Settings, Email Settings, or Scan to Email Setup, find the address you used, and check every letter and dot. A single typo will cause the send to fail. If you find an error, delete the address and add it again with the correct spelling.

If the printer is connected and the address is correct but the email still does not arrive, the printer's firmware may be out of date. On the touchscreen, go to Settings, then look for "Firmware," "Software Update," or "Check for Updates." If an update is available, let the printer read and install it — this usually takes a few minutes and the printer will restart on its own. After the update, try scanning and sending again.

If none of these steps work, write down the exact error message shown on the touchscreen and search the HP support website for your printer model number plus the error code. HP's support pages often have specific solutions for each error.

Using a computer to scan and email instead

If your printer keeps failing to send email directly, you can scan the document using the HP printer software on a computer and send it from there instead. This method works even if the printer's email feature is not set up.

On a Windows or Mac computer connected to the same network as the printer, open the HP Smart app or HP Scan software — both are free downloads from HP's website. Select your printer from the list, place the document on the scanner, and click Scan. The software will show a preview of the scanned image. Click Send or Email, choose your email program, enter the recipient's address, and send. The scan will arrive as an attachment in your email.

Frequently Asked Questions

What file format should I use when scanning to email?

PDF is the best choice for most documents because it preserves the layout and keeps multiple pages together in one file. JPEG works if you want to edit the image later or if the file size needs to be smaller. You can change the format in the printer's Scan Settings before you scan.

Can I scan to multiple email addresses at once?

Most HP printers send to one address per scan. If you need to send the same scan to multiple people, scan once to the first address, then repeat the process for the second address. Some newer models may allow multiple recipients — check your printer's manual or the touchscreen menu to see if this option is available.

Why does the scan arrive as an attachment instead of in the email body?

HP printers always send scans as file attachments, not as images inside the email itself. This is normal and happens with all HP scan-to-email functions. The recipient will see the file attached to the email and can open it in any PDF or image viewer.

Do I need a computer to set up scan to email?

No. Most HP printers let you add email addresses and send scans directly from the touchscreen without a computer. Some older models may require you to use the HP printer software on a computer to add the first email address, but after that you can scan and send from the printer alone.

What should I do if the printer says "email not configured"?

This message means the printer does not have an email address stored yet. Go to Settings, Email Settings, or Scan to Email Setup on the touchscreen and add at least one email address. Make sure the printer is connected to the internet before you try. If the touchscreen does not have these options, use the HP Smart app on a computer to configure email instead.