Check AT&T's status page first
AT&T maintains a real-time status page at att.com/support where they post outages affecting email, internet, and other services. Go there directly and look for any notice about email service disruptions in your region. If AT&T has identified a widespread problem, it will be listed with an estimated time to repair.
The status page updates faster than social media or support phone lines, so checking it first saves you time on hold. If you see no outage notice there, the problem is almost certainly on your end — your device, your connection, or your account settings — not AT&T's servers.
Key Takeaways
- AT&T's official status page at att.com/support is the only reliable source for whether their email servers are actually down.
- If no outage is posted there, the problem is almost always your internet connection, your device, or your email settings, not AT&T's system.
- Restart your modem and router before troubleshooting email settings, because a dropped connection often looks like email not working.
- AT&T email requires specific incoming and outgoing server addresses that change depending on your device type, so double-check those if you recently set up the account.
Restart your modem and router if the status page shows no outage
Unplug your modem (the device that connects to your phone line or cable) and wait 30 seconds. Then plug it back in and wait for all lights to stabilize — usually two to three minutes. After that, unplug your router (the device that broadcasts WiFi) and wait 30 seconds, then plug it back in.
This clears temporary connection problems that can make email appear broken even though AT&T's servers are fine. Once both devices are fully restarted, try opening your email again. If you were connected through WiFi, try connecting with an ethernet cable directly to the modem instead — this tells you whether the problem is WiFi or your internet connection itself.
Verify you are using the correct server addresses
AT&T email requires you to enter specific incoming and outgoing mail server addresses in your email client or phone. These addresses are different depending on whether you use Outlook, Gmail, Apple Mail, or another program. If you set up your account recently or switched devices, the wrong server address is the most common reason email stops working.
Log into your AT&T account at att.net directly through a web browser. If you can read your email there, your account is working and the problem is your device's settings. Go to AT&T's support page for your specific email client — search "AT&T email setup [your device type]" — and compare the server addresses shown there against what you entered in your device. Common mistakes are using the wrong port number (usually 993 for incoming, 465 or 587 for outgoing) or forgetting to enable encryption.
Check whether your AT&T account is active
If you have not used your AT&T email in several months, or if you recently cancelled or changed your AT&T service, your email account may have been suspended. Log into your AT&T account at att.net using your phone number and password. If you cannot log in, your account may be inactive or closed.
Call AT&T customer service at 611 from an AT&T phone, or 1-800-331-0500 from any phone, and ask whether your email account is still active. Have your account number or phone number ready. They can tell you in one call whether the account exists and whether there is a technical problem on their end.
Clear your browser cache if you are checking email through a web browser
Sometimes your browser stores old information that prevents it from loading your email correctly. Open your browser settings, find the option to clear browsing data or cache, and select "all time" as the date range. Then close the browser completely and reopen it.
Go to att.net and log in again. If your email loads this time, the problem was cached data, not an outage. If it still does not load and AT&T's status page shows no outage, the problem is your account settings or your internet connection, not AT&T's servers.
Test your internet connection separately
Open a different website — Google, your bank, anything — to confirm you have internet access. If other websites load but AT&T email does not, the problem is specific to your email setup, not your connection. If no websites load, restart your modem and router again, then test a website once more.
If you still have no internet after restarting both devices, the problem is your internet service itself. Check whether AT&T's status page shows an outage in your area. If it does not, call 611 from an AT&T phone or 1-800-331-0500 to report the outage.
Frequently Asked Questions
How do I know if AT&T email is down versus my device having a problem?
Check att.com/support for an outage notice in your area. If no outage is listed, the problem is your device, your settings, or your connection. You can also test by logging into your email through a web browser at att.net — if that works, your account is fine and the problem is your email client's settings.
What should I do if AT&T's status page says email is down?
Wait. AT&T will post an estimated repair time on the status page. Check back every 30 minutes for updates. During an outage, you cannot fix the problem on your end — the issue is AT&T's servers. You do not need to call support unless the outage lasts longer than the estimated time.
Can I still send and receive email if my internet is slow?
Yes, email works on slow connections. If your internet is very slow, emails may take longer to send or arrive, but they should still work. If email is not working at all, the problem is not speed — it is either no connection, wrong settings, or an actual outage.
Why does my email work on my phone but not my computer?
Your phone and computer have different email settings. The problem is almost always that one device has the wrong server address or port number. Check AT&T's setup guide for your computer's email client and compare it against what you entered. The settings for iPhone are different from Android, which are different from Outlook on Windows.