You can swap Apple Watch bands yourself in under a minute
Apple Watch bands are designed to come off and go back on without tools or special knowledge. The band release mechanism is built into the watch itself — you press a small button on the back of the watch, and the band slides out. The whole process takes longer to read about than to do. You can change bands as often as you want without damaging the watch or the band, and there is no risk of breaking anything if you follow the straightforward steps.
This matters because it means you are not locked into one band for the life of your watch. If you bought a sport band but want leather for work, or you want a different color for the weekend, you can own multiple bands and rotate them. The only cost is the price of the additional bands themselves.
Key Takeaways
- Press the band release button on the back of your watch, then slide the band out sideways — it takes about 30 seconds and requires no tools.
- The band release button is a small rectangular button on the back of the watch case, positioned where the band connects.
- Bands are sold separately from the watch and come in different materials, widths, and price ranges depending on the watch size.
- Apple Watch bands from the same size category are interchangeable — a 41mm band fits any 41mm watch, regardless of model year.
- Third-party bands made by other manufacturers also work, though Apple bands tend to fit more precisely.
Locating and pressing the band release button
Turn your watch over so you are looking at the back. You will see the watch case, the heart rate sensor in the center, and two small rectangular buttons on either side where the bands connect. These are the band release buttons. They are about the size of a grain of rice and sit flush with the back of the watch.
Press one of these buttons with your fingernail or the edge of a plastic card. You do not need to press hard — a gentle, steady pressure is enough. You will feel a slight click or resistance as the button depresses. Hold it down while you move to the next step. If you are having trouble finding the button, look for the thin seam where the band meets the watch case — the button is right there.
Sliding the band out
While holding down the band release button, grip the band itself and slide it away from the watch case, moving it sideways along the lug (the part of the watch that the band attaches to). The band should slide out smoothly. If it feels stuck, you may not be pressing the button hard enough — try again with slightly more pressure.
Once the band is out, release the button. The band is now completely free. Repeat this process on the other side of the watch to remove the second band piece. Some bands are one continuous piece that wraps around, while others are two separate pieces — one for each side. If yours is two pieces, you will remove them one at a time.
Installing a new band
Take your new band and align it with the lug on the watch. The band should slide in from the side, the same direction you removed the old one. Push it in firmly until you hear or feel a click — this means the band is seated correctly and locked in place. The click is the locking mechanism engaging, and it is the same mechanism that the release button disengages.
If your watch uses two separate band pieces, insert one on each side. Make sure both bands are clicked in fully before you put the watch on. A band that is not fully seated may slide out during the day. If a band does not seem to be going in smoothly, check that you are pushing it in straight and not at an angle.
Choosing the right band size for your watch
Apple Watch bands are sized by watch case size, not by wrist size. If you have a 41mm watch, you need 41mm bands. If you have a 45mm watch, you need 45mm bands. The size is printed on the back of your watch and also appears in the Settings app under General > About. Buying the wrong size band will not fit your watch.
Within each size category, most bands are adjustable or come in multiple length options. A sport band, for example, usually has multiple notches so you can tighten or loosen it to fit your wrist. Leather bands and metal bands often come in small and large sizes, or they have adjustment mechanisms built in. Check the product description before you buy to make sure the length will work for your wrist.
Where to buy replacement bands
Apple sells official Apple Watch bands through their website, in Apple stores, and through authorized retailers. Official bands range from about $50 for a sport band to $300 or more for leather or metal options. They are designed to fit precisely and are may provide to work with your watch.
Third-party bands from other manufacturers are also available through Amazon, Best Buy, and other retailers. These bands are usually cheaper — often $15 to $40 — and come in more color and style options than Apple offers. They work with Apple Watch, though the fit may be slightly looser or tighter than an official band. Read the reviews before you buy a third-party band to see whether other users report fit issues.
Caring for your bands between uses
Sport bands can be rinsed under running water and dried with a cloth. Leather bands should not get wet — wipe them with a dry cloth if they get damp. Metal bands can be cleaned with a soft cloth and a small amount of water if needed. If a band gets visibly dirty, a gentle wipe with a slightly damp cloth usually works.
Store bands in a cool, dry place when you are not wearing them. Leather bands can crack if they are stored in direct sunlight or in very dry conditions for long periods. If you own multiple bands, rotating them means no single band gets worn out as quickly, and you can extend the life of each one.
Frequently Asked Questions
Will a third-party band damage my Apple Watch?
No. Third-party bands use the same locking mechanism as Apple bands and will not damage the watch. The worst that can happen is the fit is slightly loose or tight, which is uncomfortable but not harmful. If a third-party band does not fit well, you can return it and try a different brand.
Can I use a band from an older Apple Watch on a newer one?
Yes, as long as the case size matches. A band from a Series 7 41mm watch will fit a Series 9 41mm watch. The size is what matters, not the model year. Check the back of your watch to confirm the size before you buy.
What if I lose one of my bands?
You can buy a replacement band individually without buying a new watch. Bands are sold separately, and you only need to replace the one you lost. If you have two bands and lose one, you can still wear the watch with the remaining band until you buy a replacement.
Do I need to take my watch off to change the band?
You can change the band while wearing the watch, though it is easier to do it while the watch is off your wrist. If you change it while wearing the watch, just press the release button on the side closest to you and slide that band out, then slide the new one in. Repeat on the other side.
Can I use a band made for a different smartwatch on my Apple Watch?
No. Bands made for Garmin, Fitbit, Samsung, or other smartwatches will not fit an Apple Watch because the lug width and locking mechanism are different. You need a band specifically made for Apple Watch.