AirTags use a standard CR2032 coin battery that you swap out yourself — no tools needed, and a fresh battery lasts about a year.

When your AirTag stops playing its sound or disappears from the Find My app, the battery is usually dead. Apple designed the AirTag to let you replace it without opening anything or visiting a store. The whole process takes under five minutes and costs between $3 and $8 for a replacement battery.

You do not need to remove the AirTag from your keys, bag, or wherever you keep it. You can replace the battery while it is attached to whatever you are tracking.

Key Takeaways

  • AirTags use CR2032 coin batteries, which you can buy at any drugstore, supermarket, or online retailer for a few dollars.
  • The battery compartment is on the back of the AirTag and opens by pressing and twisting the metal ring counterclockwise.
  • A fresh battery lasts roughly one year of normal use, though this varies depending on how often the AirTag communicates with your devices.
  • You can test whether the battery is actually dead by opening the Find My app and checking the AirTag's status before you buy a replacement.

What to buy before you start

You need a CR2032 battery. This is a standard coin-cell battery about the size of a dime, and it is sold everywhere: drugstores like CVS and Walgreens, supermarkets, hardware stores, and online at Amazon. A single battery costs $3 to $8 depending on the brand and where you buy it. You do not need a specific Apple brand — any CR2032 will work.

If you already have CR2032 batteries at home from other devices (calculators, watches, car key fobs), those will work in your AirTag. Check the battery itself: it will say "CR2032" printed on one side.

You do not need any tools. The AirTag opens by hand.

How to open the AirTag and remove the old battery

Hold the AirTag with the metal ring facing you. The ring is the circular metal part on the back. Press down on the ring with your thumb or finger and twist it counterclockwise (to the left) about a quarter turn. You will feel it loosen.

Once the ring has turned, lift it away from the plastic body. The white plastic disc inside will come out with it. The old battery is sitting in the plastic disc — it looks like a small silver coin.

Pop the old battery out by pressing on it from the back side of the disc. It will spring out. You can throw it away or recycle it at a store that takes batteries.

How to install the new battery

Take your new CR2032 battery and look at both sides. One side has a plus sign (+) printed on it — that is the positive side. The other side is blank — that is the negative side.

Place the battery into the plastic disc with the positive side facing up (toward you). It should sit flat in the shallow cup. Press down gently to make sure it is seated.

Slide the white plastic disc back into the AirTag body. The disc should sit flush with the plastic. Now screw the metal ring back on by twisting it clockwise (to the right) until it is snug. You do not need to force it — hand-tight is enough.

How to confirm the new battery is working

Open the Find My app on your iPhone, iPad, or Mac. Tap the Items tab at the bottom. Find your AirTag in the list and tap it. The status should now say "Connected" instead of "No Location Found" or "Offline."

You can also test the sound: tap "Play Sound" in the Find My app. The AirTag should beep loudly. If it does not beep or the status is still offline after a minute, the battery may not be seated correctly. Open the AirTag again, remove the battery, and reinstall it, making sure the positive side faces up.

How long a battery lasts and when to replace it

A CR2032 battery in an AirTag typically lasts about one year. This assumes normal use — checking the AirTag's location a few times a week and letting it communicate with nearby Apple devices. If you check your AirTag constantly or use it in a location where it is far from other Apple devices, the battery may drain faster.

The Find My app will notify you when the battery is running low, usually a few weeks before it dies completely. You do not have to wait for the notification to replace it — you can swap in a fresh battery anytime.

What to do if the AirTag still does not work after replacing the battery

If the AirTag is still offline in Find My after you have installed a new battery and waited a few minutes, try these steps: First, make sure Bluetooth is turned on in your iPhone's Settings. Second, move closer to an Apple device (your iPhone, iPad, or Mac) and wait two minutes for the AirTag to reconnect.

If the AirTag still shows offline, remove the battery again and check that it is a CR2032 and that the positive side is facing up. Reinstall it and wait another minute. If it remains offline after that, the AirTag itself may be damaged and you may need to contact Apple or replace the AirTag.

Frequently Asked Questions

Can I use a different type of battery in my AirTag?

No. AirTags are designed only for CR2032 coin batteries. Other battery types will not fit or will not work correctly. Always buy a CR2032 specifically.

What happens if I install the battery upside down?

The AirTag will not work. The battery needs the positive side facing up toward the metal ring. If you install it backwards, the Find My app will show the AirTag as offline. straightforward open it again and flip the battery over.

Where is the cheapest place to buy CR2032 batteries?

Prices vary, but drugstores and supermarkets often have single batteries for $4 to $6. Buying a multi-pack on Amazon or at warehouse stores like Costco is usually cheaper per battery if you have multiple devices that use them. Check the expiration date on the package — old batteries may not last as long.

Do I need to remove the AirTag from my keys to replace the battery?

No. You can replace the battery while the AirTag is attached to your keychain, bag, or whatever you are tracking. The battery compartment is accessible from the outside.

How do I know if the battery is actually dead or if something else is wrong?

Open Find My and check the AirTag's status. If it says "No Location Found" or "Offline" and has been that way for more than a few hours, the battery is likely dead. You can also try playing the sound — a dead battery will not beep. If the status is "Connected" but the AirTag is not where you expect it to be, the problem is not the battery.