A Tile battery lasts about three to four years, then the tracker stops working until you swap in a new one

Tile trackers run on a coin-cell battery — usually a CR2032 or CR2025 depending on your model — that you can replace yourself in about two minutes. The battery is not soldered in, so no tools beyond a coin are needed. Once you swap it out, your Tile works again at full strength.

The catch is that Tile does not sell replacement batteries. You buy them from a pharmacy, supermarket, or online retailer for two to five dollars each. After you install the new battery, your Tile's app will recognize it when ready — there is no pairing or setup step.

Key Takeaways

  • Tile batteries last three to four years before the tracker stops working, and you replace them yourself by opening the case with a coin.
  • The battery type depends on your Tile model: most use CR2032, but some use CR2025, so check your model number before you buy.
  • Replacement batteries cost two to five dollars and are sold at pharmacies, supermarkets, and online — Tile does not sell them directly.
  • After you insert the new battery, your Tile reconnects to the app automatically without any pairing or setup.

Finding out which battery your Tile model needs

The battery type varies by Tile model. The most common models — Tile Slim, Tile Mate, and Tile Pro — use a CR2032 battery. Tile Sticker uses a CR2025. If you have an older Tile or are not sure which model you own, check the back of the tracker itself: the model name is printed there, usually in small text.

You can also look up your model in the Tile app. Open the app, tap the Tile you want to replace the battery in, and scroll to the device details. The model name appears there. Once you know the model, search online for "Tile [model name] battery" to confirm the type, or ask a pharmacy staff member — they stock these batteries and can tell you which one fits.

Where to buy a replacement battery

Coin-cell batteries are sold almost everywhere. Pharmacies like CVS and Walgreens stock them in the watch or hearing aid section. Supermarkets carry them near the pharmacy or in the electronics aisle. Hardware stores like Home Depot and Lowe's have them too. Online, Amazon and eBay sell them in bulk packs of five or ten for less per battery than buying one at a time.

If you buy in bulk, you will have spares on hand for when the next battery dies — useful if you own multiple Tiles. A single battery costs about two to five dollars at a pharmacy, but a pack of ten online might cost eight to twelve dollars total. Check the expiration date on the package: batteries do not go bad quickly, but older stock is less reliable.

How to open your Tile and remove the old battery

Lay your Tile flat on a clean surface with the back facing up. You will see a small seam around the edge of the case. Take a coin — a penny, dime, or quarter works — and fit it into the seam at the point where you see a small notch or indent. This is usually on one of the short edges.

Turn the coin counterclockwise, as if you were opening a jar. The back of the case will pop off. Do not force it; if it does not budge after a gentle turn, try a different spot on the seam. Once the back is off, you will see the battery sitting in a small metal holder. It is usually silver and round, about the size of a dime. Gently pry it out with your fingernail or the edge of the coin.

Installing the new battery and closing the case

Before you touch the new battery, wash your hands or wipe them on a clean cloth. Oils from your skin can interfere with the connection. Take the new battery and look at it: one side is flat and marked with a plus sign (the positive side), and the other side is slightly raised (the negative side). The positive side should face up toward you when you insert it.

Drop the new battery into the metal holder with the plus sign facing up. It will sit flat and snug. Now take the back cover and align it with the case. Press it down gently and turn your coin clockwise in the seam until you hear or feel a small click. The case is now sealed. Open the Tile app on your phone — your Tile should show as connected within a few seconds. If it does not, remove the back again, take out the battery, wait ten seconds, and reinsert it.

What to do if your Tile does not reconnect after the battery swap

If your Tile still does not show up in the app after you have installed the new battery and waited a minute, the most common cause is that the battery is not making good contact. Remove the back cover again and check that the battery is sitting flat in the holder with the plus side up. If it is tilted or upside down, flip it and try again.

If the battery is in the right position and your Tile still does not connect, the battery itself may be defective — this is rare but happens. Try a different battery from the same pack or a different brand. If you have access to another Tile, test the new battery in that one to rule out a problem with your original tracker. If the new battery works in a different Tile, your original Tile may have a hardware fault and will need to be replaced through Tile's support.

How long the new battery will last

A fresh battery in a Tile Slim, Mate, or Pro will last three to four years under normal use. If you use your Tile heavily — checking its location multiple times a day or leaving Bluetooth on constantly — the battery may drain faster and last closer to two years. Light use extends the life toward four years or slightly beyond.

Tile does not offer a battery replacement service or sell pre-installed batteries. When your battery dies, you replace it yourself, which is why Tile trackers are cheaper upfront than some competitors but require this small maintenance step. If you do not want to replace batteries yourself, a tracker with a rechargeable battery may suit you better, though those require charging every few weeks.

Frequently Asked Questions

Can I use a different battery type if I cannot find the exact one?

No. CR2032 and CR2025 are not interchangeable — they have different thicknesses and voltages. Using the wrong type can damage your Tile or cause it to malfunction. Buy the correct type for your model.

What happens to my Tile data when the battery dies?

Your Tile's history and settings stay in the app. Once you install the new battery, your Tile reconnects and works exactly as before. No data is lost.

Is it safe to replace the battery myself, or should I send it to Tile?

It is safe to do yourself — the case is designed to open without tools, and there are no electrical hazards. Tile does not offer a replacement service. You handle the battery swap.

Can I buy batteries in bulk and store them for later?

Yes. Coin-cell batteries last for years if stored in a cool, dry place. Buying a pack of ten is cheaper per battery than buying one at a time, and you will have spares ready when you need them.

Will replacing the battery void my Tile's warranty?

No. The battery is a user-replaceable part, and Tile expects you to replace it yourself. Opening the case does not void the warranty.