The pairing process takes about 10 minutes and happens through the Watch app on your new phone
When you get a new iPhone, your Apple Watch does not automatically connect to it. You need to pair them again using the Watch app, which walks you through a few straightforward steps. The watch will restore your apps, settings, and data from iCloud during this process — you do not have to set everything up from scratch.
The pairing works best when both devices are charged to at least 50 percent, within a few feet of each other, and connected to the same Wi-Fi network. If you are switching from an older iPhone to a newer one, unpair the watch from the old phone first. This takes less than a minute and prevents confusion later.
Key Takeaways
- Unpair your watch from your old iPhone before pairing it with the new one by opening the Watch app, tapping your watch name, and selecting Remove.
- On your new iPhone, open the Watch app, tap Start Pairing, and hold your new phone's camera over the animation on your watch screen until it recognizes the code.
- Sign in with your Apple ID when prompted — this is how your watch restores your previous apps, health data, and settings from iCloud.
- The full pairing and restore process usually takes 10 to 20 minutes depending on how many apps you had installed.
- Keep both devices close together and plugged in during pairing, because the watch will restart several times and needs power to complete the process.
Unpair your watch from your old iPhone
Open the Watch app on your old iPhone. Scroll down and tap the watch name at the top of the screen, then tap the information icon (a small circle with an "i" inside). Tap Remove, then Remove again when the confirmation appears. This disconnects the watch from that phone and prepares it to pair with your new one.
If you no longer have access to your old iPhone, you can skip this step — the watch will straightforward forget the old pairing when you pair it with the new phone. However, unpairing first is cleaner and prevents the watch from trying to reconnect to the old device later.
Start pairing on your new iPhone
On your new iPhone, open the Watch app (the icon looks like a small watch face). Tap Start Pairing at the bottom of the screen. The app will ask you to choose whether you are setting up a new watch or restoring from a backup. Select Restore from Backup if you want your previous apps and settings. Select Set Up as New Watch only if you want to start completely fresh.
For most people, Restore from Backup is the right choice because it brings back your health data, installed apps, and custom settings without extra work. The restore pulls everything from iCloud, so you need to be signed in with the same Apple ID you used on your old phone.
Use your camera to recognize the watch code
Your new iPhone will ask you to hold its camera over the animation that appears on your watch screen. Point the iPhone's camera at the watch face and hold it steady about 6 to 8 inches away. The iPhone will beep when it recognizes the code. This step confirms that you own both devices and prevents someone else from pairing a watch to your phone remotely.
If the camera does not recognize the code after a few tries, move closer or farther away slightly, or make sure the watch screen is clean and bright. If the iPhone camera still cannot read it, you can tap Enter Pairing Code Manually and type the code shown on your watch into your phone instead.
Sign in with your Apple ID and choose your settings
The iPhone will ask you to sign in with your Apple ID. Use the same account you used on your old phone — this is how iCloud knows which backup to restore. If you have two-factor authentication turned on (which Apple recommends), you may need to enter a code sent to another trusted device.
After sign-in, the app will ask about location services, Siri, and whether you want to use your iPhone's cellular data on the watch (if your watch model supports it). These are optional — you can turn them on now or adjust them later in the Watch app settings. The watch will then begin downloading your apps and data from iCloud.
Keep both devices plugged in while the watch restores
The watch will restart several times during the restore process and may show an Apple logo or a spinning circle. This is normal. Keep the watch and iPhone close together and plugged into power during this time. The whole process usually takes 10 to 20 minutes, depending on how many apps you had and how fast your internet connection is.
Do not force-restart the watch or unplug it during this time, even if it seems stuck. If the process takes longer than 30 minutes or stops responding, unplug both devices, wait a minute, plug them back in, and try again. If problems continue, you may need to unpair the watch and start over.
Verify your watch is connected and working
Once the restore finishes, your watch screen will show your watch face and the time. Open the Watch app on your iPhone and check that your watch name appears at the top with a green dot next to it — the green dot means the watch is connected. Swipe through the app to confirm your apps are there and your health data has returned.
Test a few features: raise your wrist to wake the watch, try sending a message from your iPhone to see if it arrives on the watch, and check that notifications are coming through. If something is not working, restart both devices by powering them off and back on, then wait a minute for them to reconnect.
Frequently Asked Questions
What if my watch won't pair with my new iPhone?
Make sure both devices are on the same Wi-Fi network, that Bluetooth is turned on in your iPhone settings, and that you are signed in with the correct Apple ID. Restart both devices and try again. If the camera code recognition fails repeatedly, use the manual pairing code option instead. If pairing still fails after these steps, unpair the watch completely and set it up as a new watch rather than restoring from backup.
Will I lose my health data and activity rings when I pair with a new iPhone?
No. Your health data and activity history are stored in iCloud, not on the watch itself. When you restore from backup during pairing, all of that data comes back automatically. The only data you lose is if you choose Set Up as New Watch instead of Restore from Backup.
Can I pair my watch with multiple iPhones at the same time?
No. An Apple Watch can only be paired with one iPhone at a time. If you want to switch the watch to a different iPhone, you must unpair it from the current phone first. The pairing process takes a few minutes, but you can switch between phones as often as you need to.
Do I need to unpair my watch if I'm just upgrading to a new iPhone from the same carrier?
Yes. Even though it is the same carrier, the new iPhone is a different device. You still need to unpair the watch from your old phone and pair it with the new one. The good news is that restoring from backup means you do not have to reinstall apps or reconfigure settings.
What should I do if the pairing process gets stuck halfway through?
Unplug both devices, wait one minute, and plug them back in. Let the watch finish restarting on its own — do not force-restart it. If it stays stuck for more than 30 minutes, force-restart the watch by pressing and holding the side button until the power-off slider appears, then slide to power off. Wait 10 seconds, press the side button again to turn it back on, and try pairing again.