The basic process: unpair first, then pair again

When you get a new iPhone, your old Apple Watch will not automatically connect to it. You need to unpair the watch from your old phone first, then pair it with the new one. This takes about 10 to 15 minutes and requires both devices in front of you.

The order matters: always unpair before you set up the new phone, or the watch will stay locked to the old one. If you have already set up your new iPhone without unpairing, you can still fix it — just go back and unpair, then pair again.

You will need your Apple ID password during this process. Have it ready before you start, because the watch will ask for it when you pair.

Key Takeaways

  • Unpair your watch from the old iPhone first by opening the Watch app, tapping your watch name, and selecting "Unpair Apple Watch" — this erases the watch completely.
  • After unpairing, put your old iPhone away and hold your new iPhone next to the watch; the new iPhone will detect the watch automatically within a few seconds.
  • During pairing, you will need to enter your Apple ID password and choose whether to restore from a backup or set up as new.
  • The entire pairing process takes 5 to 10 minutes, but the watch may take another 30 minutes to read apps and updates after pairing is complete.
  • If your watch is older than watchOS 4, it may not work with your new iPhone — check Apple's compatibility list before you start.

Step 1: Unpair the watch from your old iPhone

Open the Watch app on your old iPhone. Tap the "My Watch" tab at the bottom of the screen, then tap your watch name at the top. Scroll down and tap "Unpair Apple Watch." The app will ask you to confirm — tap "Unpair [Your Watch Name]" again.

The watch will erase itself during this step. You will see a progress wheel on the watch screen. This takes 2 to 5 minutes. Do not close the Watch app or turn off either device while this is happening.

Once unpairing is complete, your watch will show the Apple logo and then a blank screen. Your old iPhone will no longer show the watch in the Watch app. At this point, you can put the old iPhone away.

Step 2: Start pairing on your new iPhone

Turn on your new iPhone and go through the initial setup until you reach the home screen. Open the Watch app — it is in the Utilities folder if you do not see it on the home screen. Tap "Start Pairing" or the plus sign icon.

Hold your new iPhone next to the watch. The iPhone will scan for nearby watches. You should see your watch name appear within 10 seconds. Tap it to begin pairing.

If the iPhone does not find the watch, make sure both devices have Bluetooth turned on. Go to Settings on the iPhone, tap Bluetooth, and make sure it is on. Then try again.

Step 3: Enter your Apple ID and choose your setup method

The iPhone will ask for your Apple ID password. Type it in. This is the same Apple ID you use for your iPhone — it does not have to be the same one you used with the old watch, but using the same one makes it easier to restore your apps and settings.

Next, you will see two options: "Restore from Backup" or "Set Up as New Watch." If you want your old watch's apps, watch faces, and settings back, choose "Restore from Backup." If you want a fresh start, choose "Set Up as New Watch."

Most people choose "Restore from Backup" because it saves time — your apps and settings come back automatically. Choose "Set Up as New Watch" only if your old watch was having problems or if you want to start completely fresh.

Step 4: Wait for the pairing to finish

The iPhone will show a progress screen while it pairs with the watch. You will see the pairing animation on both screens. This takes 3 to 5 minutes. Keep both devices close together and do not put them in your pocket or another room.

Once pairing is complete, the watch will show the home screen with your apps and watch faces. The iPhone will show a confirmation screen. Tap "Done" on the iPhone.

At this point, pairing is finished, but the watch is not done yet. It will spend the next 15 to 30 minutes downloading apps and installing updates in the background. You can use both devices normally during this time, but the watch may be slow or unresponsive until it finishes.

What to do if pairing fails or gets stuck

If the iPhone cannot find the watch, unpair again and try once more. Make sure Bluetooth is on for both devices. Restart both devices by turning them off and back on, then try pairing again.

If the watch gets stuck on the pairing screen, force restart it. Press and hold the side button until you see "Power Off" appear, then slide to power off. Wait 10 seconds, then press and hold the side button again until the Apple logo appears.

If you see an error message about your Apple ID, double-check that you typed your password correctly. If you have forgotten your Apple ID password, you will need to reset it on your iPhone before you can pair the watch.

Checking compatibility with older Apple Watch models

Not every old Apple Watch works with every new iPhone. The oldest watches — the original Series 0 and Series 1 — stopped receiving updates after watchOS 5 and will not pair with iPhones running iOS 16 or later.

To check if your watch is compatible, look up your watch model and the iOS version on your new iPhone. Go to Settings, tap General, then tap About to see your iOS version. If your watch is Series 2 or newer, it will almost certainly work with your new iPhone.

If your watch is too old to pair, you have two options: keep using it with your old iPhone if you still have it, or upgrade to a newer watch model that works with your new iPhone.

Frequently Asked Questions

Do I have to unpair before I set up my new iPhone?

You do not have to, but it is much easier if you do. If you set up your new iPhone first without unpairing, the watch will stay locked to your old phone. You can still fix it by unpairing from the old phone later, but it adds an extra step. Unpairing first is the fastest path.

Will I lose my watch data when I unpair?

The watch itself will erase, but your health and fitness data stays in iCloud if you are signed in with your Apple ID. When you pair with the new iPhone and restore from backup, your data comes back. If you choose "Set Up as New Watch," your old data will not return.

Can I pair my watch to two iPhones at the same time?

No. A watch can only be paired to one iPhone at a time. If you try to pair it to a second iPhone without unpairing from the first, the second iPhone will not find it. You must unpair completely before pairing to a different phone.

How long does it take for apps to read after pairing?

It depends on how many apps you have and your internet speed. Most watches finish downloading apps within 15 to 30 minutes. Larger apps like fitness or music apps may take longer. The watch will work during this time, but it may be slower than usual.

What if my new iPhone is a different size or model than my old one?

The watch does not care what iPhone model it is paired to — it works the same way. The pairing process is identical whether you are moving from an iPhone 12 to an iPhone 15 or from a smaller model to a larger one.