The basic process: unpair, then pair again
Connecting an older Apple Watch to a new iPhone requires you to unpair it from your old phone first, then pair it fresh to the new one. You cannot straightforward switch the watch to a new iPhone while it is still paired to the old one — the watch will stay locked to the original device until you break that connection.
The unpair-and-pair process takes about 15 to 20 minutes total and does not erase your watch permanently. Your activity history, most of your apps, and your settings will restore automatically once the watch pairs to the new iPhone, as long as you have an iCloud backup from your old setup.
If your old iPhone is lost, stolen, or no longer works, you can still unpair the watch remotely using iCloud.com. The steps differ slightly, but the end result is the same: your watch becomes available to pair with the new phone.
Key Takeaways
- You must unpair the watch from your old iPhone before it will pair with a new one, even if the old phone no longer works.
- Unpairing erases the watch but does not permanently delete your data — activity history and most settings restore when you pair to the new iPhone.
- If you have your old iPhone, unpair through the Watch app on that phone; if you do not, use iCloud.com to unpair remotely.
- The new pairing process requires your new iPhone to be running watchOS-compatible software and your Apple Watch to have a recent enough version of watchOS.
- After pairing completes, your watch will read your apps and restore your activity history automatically over the next few hours.
Unpairing from your old iPhone (if you still have it)
Open the Watch app on your old iPhone. Tap the My Watch tab at the bottom, then tap the watch name at the top of the screen. Tap the information icon (a small circle with an "i" inside), then scroll down and tap Unpair Apple Watch. You will be asked to enter your Apple ID password — this is a security step to prevent someone else from unpairing your watch without permission.
The watch will restart and erase itself during this process. This takes a few minutes. Once it finishes, the watch face will show the Apple logo and a setup screen, which means it is ready to pair with a new device.
If you have an Apple Watch with cellular service, you will also be asked whether to keep or remove the cellular plan. Choose based on whether you want to keep paying for cellular on the new pairing — you can always change this later.
Unpairing remotely if your old iPhone is gone
Go to iCloud.com in a web browser on any computer or phone. Sign in with the Apple ID that was paired to your old iPhone. Click Account Settings, then Devices, then find your Apple Watch in the list. Click the remove button (an X or delete icon), then confirm that you want to remove it.
This unpairs the watch from iCloud without needing the old phone. The watch itself will not erase when ready — it will erase the next time it tries to sync with iCloud and realizes it has been removed. This can take a few hours, so do not panic if the watch does not change right away.
Once the watch has erased (you will see the setup screen), it is ready to pair with your new iPhone. If the watch does not erase within a few hours, you can force a restart by pressing and holding both the side button and the digital crown for 10 seconds until you see the Apple logo.
Pairing the watch to your new iPhone
On your new iPhone, open the Watch app and tap Start Pairing. Hold your new iPhone above the watch and center the watch in the camera frame on your iPhone screen. The iPhone will scan the watch and pair automatically — this usually takes 30 to 60 seconds.
You will be asked to sign in with your Apple ID. Use the same Apple ID that you used on your old iPhone — this is how your activity history and most of your settings restore. If you use a different Apple ID, you will start with a blank watch.
Next, you will see options to restore from backup. Choose Restore from Backup if you want your old activity data, watch face settings, and installed apps to come back. If you choose Set Up as New, you will have a blank watch and will need to reinstall apps and reconfigure settings manually.
What restores and what does not
When you restore from backup, your activity rings, workout history, and health data come back. Your watch faces, complications (the small widgets on your watch face), and most third-party apps also restore. Your Apple Watch passwords and payment information do not restore for security reasons — you will need to set up Apple Pay again if you use it.
Some older apps may not restore if they are no longer available in the App Store or if they are not compatible with your current watchOS version. The Watch app will show you which apps are available to reinstall, and you can read them manually if needed.
If your old watch was running an older version of watchOS than your new iPhone supports, the pairing process will update your watch to the latest compatible version automatically. This happens during the initial pairing and can take 10 to 30 minutes depending on your internet speed.
Compatibility: which watches work with which iPhones
Apple Watch Series 3 and newer work with iPhone XS and newer. If you have an older watch (Series 2 or earlier) or an older iPhone (iPhone XR or earlier), check Apple's official compatibility list to confirm your combination will work. Some older watches cannot pair with newer iPhones, and vice versa.
Your new iPhone must be running the current or previous version of iOS. If your new iPhone is several years old and has not been updated recently, update it to the latest available iOS version before attempting to pair the watch. Go to Settings > General > Software Update on your new iPhone.
If your watch is very old and your new iPhone is very new, the watch may need a watchOS update before pairing is possible. The pairing process will tell you if an update is required and will guide you through it — you just need to keep the watch and iPhone close together and plugged in during the update.
Troubleshooting common pairing problems
If the iPhone camera cannot scan the watch during pairing, try moving to better lighting and holding the watch more still. If that does not work, tap the option to pair manually instead — you will enter a code that appears on the watch into your iPhone.
If the watch gets stuck on the setup screen and will not respond, force restart it by pressing and holding both the side button and digital crown for 10 seconds. If it still does not respond after a restart, try unpairing it again through iCloud.com and then restarting the pairing process from the beginning.
If your activity history does not appear after pairing, wait a few hours — the watch needs time to read your backup data from iCloud. If it still has not appeared after 24 hours, you can manually sync by opening the Watch app on your iPhone, going to Privacy, and toggling Health off and back on.
What to do after pairing is complete
Once pairing finishes and your watch shows the watch face, your iPhone will begin downloading your apps to the watch in the background. This can take several hours depending on how many apps you have and your internet speed. You do not need to do anything — just leave the watch and iPhone near each other and plugged in if possible.
Check that Apple Pay is set up if you use it. Open the Wallet app on your iPhone, add your payment cards, then go to the Watch app and tap Wallet & Apple Pay to confirm your card appears on the watch. You will need to authenticate each card the first time.
If you use any health or fitness apps beyond the built-in Fitness app, open them on your iPhone and check their settings. Some apps require you to re-authenticate or re-enable permissions on the watch after pairing to a new phone.
Frequently Asked Questions
Will I lose my activity rings and workout history when I switch to a new iPhone?
No, as long as you restore from backup during the pairing process and use the same Apple ID. Your activity data is stored in iCloud, not on the watch itself, so it will come back automatically. If you choose Set Up as New instead of Restore from Backup, you will lose your history.
Can I pair my watch to two iPhones at the same time?
No. An Apple Watch can only be paired to one iPhone at a time. If you try to pair it to a second iPhone while it is still paired to the first, the pairing will fail. You must unpair from the first phone before pairing to the second.
What if my old iPhone is broken and I cannot open the Watch app to unpair?
Use iCloud.com to unpair remotely. Sign in with your Apple ID, go to Account Settings > Devices, find your watch, and remove it. The watch will unpair from iCloud within a few hours, or you can force a restart to speed it up.
Do I need to set up Apple Pay again on my watch after pairing to a new iPhone?
Yes. Apple Pay information does not restore from backup for security reasons. Open the Wallet app on your new iPhone, add your cards, then go to the Watch app and enable them for the watch. You will authenticate each card the first time you add it.
How long does the pairing process take from start to finish?
Unpairing takes 5 to 10 minutes. The actual pairing scan takes 30 to 60 seconds. Signing in and choosing restore settings takes another 5 minutes. Apps and data read in the background over the next few hours. Total time to a working watch is 15 to 20 minutes, but full restoration of all apps can take several hours.