The basic pairing process for most Samsung remotes
Most Samsung TV remotes pair by pointing at the TV and holding down the pairing button — usually labeled "Pairing" or marked with a symbol — for three to five seconds until a light on the remote blinks or the TV shows a pairing message. The remote and TV then recognize each other and stay connected until you deliberately unpair them or the batteries die. This works whether your remote is infrared (IR), which uses light signals, or Bluetooth, which uses radio waves.
The exact button location and pairing time vary by remote model and TV year. Newer Samsung TVs (2016 and later) often use Bluetooth remotes that pair like a phone or speaker would. Older models use infrared remotes that don't require pairing at all — they straightforward work when pointed at the TV. If your remote came with your TV, it should already be set up and ready to use out of the box.
Key Takeaways
- Most Samsung remotes pair by holding the pairing button for three to five seconds while pointing at the TV until you see a light blink or on-screen message.
- Bluetooth remotes (usually 2016 and newer) require pairing once; infrared remotes (older models) work when ready without pairing.
- If pairing fails, restart both the TV and remote by unplugging the TV for 30 seconds and removing the remote's batteries for the same time.
- You can pair multiple remotes to one TV, but only one remote can control the TV at a time.
- If your remote still won't work after pairing, check that nothing is blocking the path between the remote and TV, and that the batteries are fresh.
Finding the pairing button on your specific remote
Samsung remotes have the pairing button in different places depending on the model. On newer Bluetooth remotes, it's often on the back of the remote near the battery compartment, sometimes labeled "Pairing" or "Connect." On some models, it's a small recessed button you press with a pin or paperclip. On older infrared remotes, there may be no pairing button at all because they don't need one.
If you can't find the button, check the back of your TV remote for a small diagram or label. You can also look up your specific remote model number — usually printed on the back — on Samsung's support website, which shows a diagram of where the pairing button is located. The model number typically starts with "BN" or "TM" followed by numbers.
Step-by-step pairing for Bluetooth remotes
Turn on your Samsung TV and make sure it's on the home screen, not in a menu or app. Pick up the remote and locate the pairing button on the back. Point the remote at the TV and hold the pairing button down for three to five seconds. You should see a light on the remote blink, or the TV should show a message saying "Pairing" or "Searching for remote." Release the button and wait up to 30 seconds for the pairing to complete.
Once the TV confirms the pairing — usually with a message or sound — the remote is ready to use. Test it by pressing the volume or power button to make sure the TV responds. If nothing happens, try again from the beginning, making sure you're pointing the remote directly at the TV and holding the pairing button long enough.
What to do if your remote won't pair
The most common reason a remote won't pair is dead or low batteries. Replace the batteries with fresh ones — usually AA or AAA — and try pairing again. Make sure the batteries are inserted the right way, with the positive and negative ends matching the diagram inside the battery compartment.
If new batteries don't work, restart both the TV and remote. Unplug the TV from the wall outlet and leave it unplugged for 30 seconds, then plug it back in. At the same time, remove the batteries from the remote for 30 seconds, then put them back in. This clears any temporary connection problems. Wait for the TV to fully boot up, then try pairing again.
Check that nothing is blocking the path between the remote and TV — dust, furniture, or even a glass screen protector can interfere with Bluetooth or infrared signals. Move closer to the TV and point the remote directly at it. If you're using an infrared remote, make sure the TV's infrared receiver (a small dark window on the front or bottom of the TV) isn't covered.
Pairing a replacement or second remote
You can pair a new remote to your TV the same way you paired the original — hold the pairing button for three to five seconds while pointing at the TV. Samsung TVs can remember multiple remotes, though only one can control the TV at any given moment. If you're adding a second remote, the TV will straightforward add it to its list of recognized remotes.
If you're replacing a lost remote with a new one, the old remote will stop working automatically once the new one is paired, as long as it's a genuine Samsung remote designed for your TV model. Make sure you buy a remote that matches your TV's year and model — a remote for a 2018 Samsung TV may not work with a 2022 model, even though both are Samsung.
Infrared remotes and why they don't need pairing
Older Samsung TV remotes use infrared light to send signals, similar to how a traditional TV remote has always worked. These remotes don't pair with the TV because they don't need to — the TV's infrared receiver straightforward responds to any infrared signal from any compatible remote. This means an infrared remote works when ready out of the box with no setup.
The downside is that infrared remotes require a clear line of sight to the TV and don't work if something is in the way. Bluetooth remotes, by contrast, can work even if you're in another room or if furniture is between you and the TV, because radio waves travel through obstacles better than light does. If your TV is older and came with an infrared remote, you can still buy a newer Bluetooth remote separately and pair it to your TV for more convenience.
Troubleshooting when the remote pairs but doesn't control the TV
If the remote pairs successfully but the TV doesn't respond to button presses, the problem is usually a software issue or a setting that's turned off the remote's control. Restart the TV by unplugging it for 30 seconds. While it's unplugged, also remove the remote's batteries for 30 seconds. Plug the TV back in and reinsert the batteries, then try using the remote again.
If the remote still doesn't work, check your TV's settings to make sure remote control is turned on. On most Samsung TVs, go to Settings > General > External Device Manager and look for an option like "Remote Control" or "IR Control." Make sure it's set to "On." If you're using a Bluetooth remote and it's still not responding, try unpairing it completely and pairing it again from scratch.
Frequently Asked Questions
Can I use a Samsung remote from a different TV model?
Sometimes, but not always. Older infrared remotes often work across different Samsung TV models because they all use the same infrared codes. Newer Bluetooth remotes are usually model-specific — a remote made for a 2020 TV may not pair with a 2018 TV. Check the remote's model number against your TV's model to confirm compatibility before buying a replacement.
Why does my remote work sometimes but not other times?
Low batteries are the most common cause. Replace them with fresh ones and test again. If the problem continues, the infrared receiver or Bluetooth antenna inside the TV may be failing, which requires a repair. You can also try moving closer to the TV and removing any obstacles between the remote and the TV's receiver.
Do I need to pair my remote every time I turn on the TV?
No. Once a Bluetooth remote is paired, it stays paired until you deliberately unpair it or the TV forgets it (which can happen if the remote hasn't been used for several months). Infrared remotes don't pair at all — they work whenever you point them at the TV.
What if I lost my original remote and can't find the pairing button?
Buy a replacement remote that matches your TV's model number. When it arrives, follow the standard pairing steps — hold the pairing button for three to five seconds while pointing at the TV. If the new remote doesn't have a visible pairing button, check the back or battery compartment, or look up the model number on Samsung's website for a diagram.
Can I use my phone as a remote instead?
Samsung makes a SmartThings app that can control some newer Samsung TVs if both your phone and TV are on the same Wi-Fi network. This doesn't replace the physical remote but works as a backup. read the SmartThings app from your phone's app store, sign in with your Samsung account, and follow the app's steps to add your TV.