The basic steps to pair a Bluetooth device with your Roku

To connect a Bluetooth speaker, headphone, or other audio device to your Roku TV, you go through the TV's settings menu rather than the device itself. Open your Roku remote, press the Home button, then navigate to Settings > Remotes & devices > Bluetooth devices. Select "Add device" and put your Bluetooth speaker or headphones into pairing mode — usually a button you hold for three to five seconds until a light blinks. Your Roku will search for nearby devices and show a list. Select your device from that list, and the pairing is complete.

The whole process takes about two minutes. Once paired, your Roku remembers that device, so you won't have to pair it again unless you unpair it or reset the TV.

Key Takeaways

  • Pairing happens in Settings > Remotes & devices > Bluetooth devices on your Roku TV, not on the speaker or headphones themselves.
  • Your Bluetooth device must be in pairing mode — usually activated by holding a button until a light blinks — before your Roku can find it.
  • Once paired, your Roku TV will automatically connect to that device when both are powered on and in range.
  • Most Roku TVs support multiple Bluetooth devices, but only one can play audio at a time.

Where to find the Bluetooth settings on your Roku remote

The path through your Roku menu is always the same regardless of which Roku model you own. Press the Home button on your remote — this is the button with a house icon, usually near the top. You'll see your home screen with rows of apps and channels. Use the arrow buttons to highlight Settings, which is typically in the top row on the right side.

Once in Settings, scroll down and select Remotes & devices. This menu controls everything connected to your TV wirelessly. Select Bluetooth devices from the submenu. If you've never paired anything before, you'll see an "Add device" option. Select it, and your Roku will begin searching for Bluetooth devices within range.

How to put your speaker or headphones into pairing mode

Before your Roku can find your device, that device must be in pairing mode. This is a temporary state where the device broadcasts its presence to any nearby Bluetooth receiver. The method varies by brand, but most speakers and headphones have a dedicated button labeled Bluetooth, Power, or Pairing. Hold this button for three to five seconds until you see a light blink — usually blue or white, sometimes alternating colors.

Check your device's manual or the manufacturer's website if you're unsure which button to use. Some devices enter pairing mode automatically when first powered on, but most require you to hold the button. Leave the device in pairing mode for at least 30 seconds while your Roku searches — if the search times out, you can start over.

What happens after your device appears on the Roku screen

Once your Roku finds your Bluetooth device, it will display the device name on the screen — for example, "JBL Flip 5" or "Sony WH-1000XM4". Select that name using your remote's arrow buttons and press OK or Select. Your Roku will then attempt to pair with the device. This usually takes five to ten seconds.

When pairing is successful, you'll see a confirmation message on your TV screen, and the light on your speaker or headphones will stop blinking and stay solid. Your Roku TV is now connected to that device. Any audio from the TV — apps, streaming services, or the menu itself — will play through the Bluetooth device instead of the TV's built-in speakers.

Connecting to a device you've already paired before

Once you've paired a device, your Roku remembers it. The next time you turn on both your TV and your Bluetooth device, they will connect automatically if they're in the same room and both powered on. You don't need to go back into the settings menu.

If your Roku doesn't automatically reconnect, go back to Settings > Remotes & devices > Bluetooth devices. You'll see your previously paired device listed. Select it and choose "Connect" instead of "Add device". The connection should happen within a few seconds. If automatic reconnection still doesn't work, check that your Bluetooth device is fully charged — low battery can prevent automatic pairing.

Switching between multiple Bluetooth devices

Your Roku TV can pair with multiple Bluetooth speakers, headphones, or other devices, but only one can play audio at a time. If you have two speakers paired and both are powered on, your Roku will use whichever one it connected to most recently. To switch to a different device, go to Settings > Remotes & devices > Bluetooth devices and select the device you want to use.

This is useful if you have a speaker in your living room and a different one in your bedroom, or if you want to switch between headphones and a speaker. You can also unpair a device you no longer use by selecting it from the Bluetooth devices list and choosing "Unpair" or "Remove". This frees up space and prevents accidental connections.

Troubleshooting when your device won't pair

If your Roku can't find your Bluetooth device, start by checking that the device is actually in pairing mode — the light should be blinking. If it's not blinking, hold the pairing button again for a full five seconds. Move the device closer to your Roku TV, as Bluetooth has a range of about 30 feet but works more reliably within 10 feet.

If your device still doesn't appear, restart both the TV and the Bluetooth device. Turn off the TV completely, wait 10 seconds, and turn it back on. Power off your speaker or headphones, wait a few seconds, and power it back on. Then return to Settings > Remotes & devices > Bluetooth devices and try adding the device again. If pairing still fails, check the manufacturer's website to confirm your device supports Roku TV or standard Bluetooth audio — some older or specialized devices may not be compatible.

Frequently Asked Questions

Can I use Bluetooth headphones with my Roku TV?

Yes. Bluetooth headphones pair the same way as speakers — through Settings > Remotes & devices > Bluetooth devices. Once paired, all TV audio will play through the headphones instead of the TV's speakers. This is useful if you want to watch without disturbing others in the room.

Will my Roku TV still work with a wired speaker if I connect a Bluetooth speaker?

No. When you connect a Bluetooth device, your Roku sends all audio to that device and mutes the TV's built-in speakers. If you want to use a wired speaker instead, you'll need to unpair the Bluetooth device first, then connect the wired speaker to the TV's audio output jack or HDMI port.

What if my Bluetooth device keeps disconnecting?

Check that your device is fully charged — low battery is the most common cause of disconnection. Make sure nothing is blocking the signal between your TV and the device, and keep them within 10 to 15 feet of each other. If disconnections continue, unpair the device, restart both the TV and the device, and pair again from scratch.

Can I pair a Bluetooth device that's in another room?

Bluetooth works best within 30 feet and through one or two walls, but pairing is most reliable when the device is in the same room as your TV. If you're pairing a device from another room, bring it close to the TV first to complete the pairing, then move it back to where you want to use it. Once paired, it will reconnect automatically when you turn it on.

Do I need a special Roku Bluetooth speaker?

No. Your Roku TV works with any standard Bluetooth speaker or headphones — you don't need a Roku-branded device. Look for speakers or headphones labeled as Bluetooth-compatible. Most modern audio devices support Bluetooth, but very old devices may not.