A factory reset clears all your settings and returns the speaker to its original state

A factory reset on your Sonos Move erases your Wi-Fi network, room name, any paired devices, and all customizations. You would do this if the speaker stops responding to commands, won't connect to your network, or you're selling or giving it away. The reset itself takes about a minute, but reconnecting afterward takes another five to ten minutes.

There are two ways to reset: a soft reset (which you should try first) and a factory reset (which clears everything). A soft reset is like restarting your phone — it fixes most connection problems without losing your setup. A factory reset is what you need if the soft reset doesn't work or if you want to wipe the device completely.

Key Takeaways

  • A soft reset restarts the speaker without erasing settings and fixes most connection problems in under a minute.
  • A factory reset clears all settings, Wi-Fi networks, and pairings, and you'll need to set up the speaker again from scratch using the Sonos app.
  • You can perform a soft reset by unplugging the speaker for 30 seconds, or a factory reset by holding the reset button on the back for 5 to 10 seconds.
  • After any reset, you'll need to open the Sonos app, add the speaker as a new device, and reconnect it to your Wi-Fi network.

How to do a soft reset (try this first)

A soft reset restarts the speaker without touching any of your settings. This fixes most problems — the speaker won't connect, it's slow to respond, or it drops out of your network. Unplug the power cable from the back of the Sonos Move, wait 30 seconds, and plug it back in. The light on the front will blink while it restarts, then turn solid white when it's ready.

Wait for the light to stop blinking before you try to use the speaker. If it still won't connect after a soft reset, move on to a factory reset. If it does reconnect, you're done — your room name, Wi-Fi network, and any paired speakers are still there.

How to do a factory reset using the reset button

The reset button is on the back of the Sonos Move, next to the power port. It's a small recessed button you'll need a straightened paperclip or a ballpoint pen to reach. Hold the button down for 5 to 10 seconds — you'll see the light on the front turn orange, then blink white. When the light turns solid white again, the reset is complete and the speaker is ready to set up.

Do not unplug the speaker while the light is blinking. If you release the button too early (before 5 seconds), the reset won't take. If you hold it too long (past 10 seconds), nothing bad happens — the speaker will just reset when you release it.

What happens after a factory reset

After a factory reset, the Sonos Move has no Wi-Fi network, no room name, and no paired devices. The speaker is blank, as if it just came out of the box. You'll need to set it up again using the Sonos app on your phone or tablet.

Open the Sonos app, tap the "+" button to add a device, and select "Set up a new speaker." The app will search for the Sonos Move and ask you to name the room (for example, "Bedroom" or "Kitchen"). Then it will ask for your Wi-Fi network name and password. Once you enter those, the speaker will connect and you can start using it again. If you had other Sonos speakers in your system before the reset, you can add the Move back to that system during setup, or keep it as a standalone speaker.

When to factory reset before selling or giving away

If you're selling the Sonos Move or giving it to someone else, do a factory reset before you hand it over. This removes your Wi-Fi network, your Sonos account connection, and any personal setup. The new owner will see a blank speaker and can set it up with their own network and account.

After you reset the speaker, you can also remove it from your Sonos account on the app. Open the Sonos app, go to Settings, select the Sonos Move, and choose "Remove from System." This step is optional if you've already done a factory reset, but it's good practice to keep your account clean.

Troubleshooting if the reset doesn't work

If the light doesn't turn orange or blink white when you hold the reset button, the speaker may not be getting power. Check that the power cable is fully plugged into both the speaker and the wall outlet. Try a different outlet to rule out a dead power socket. If the speaker still won't reset, unplug it for a full minute, then try the reset button again.

If the speaker resets but won't reconnect to Wi-Fi after setup, move it closer to your router and try again. If it still won't connect, restart your router by unplugging it for 30 seconds. If the Sonos Move still won't join your network after that, the speaker may have a hardware problem and you may need to contact Sonos support.

Soft reset vs. factory reset: which one do you need?

ProblemTry This FirstIf That Doesn't Work
Speaker won't respond to voice commandsSoft reset (unplug for 30 seconds)Factory reset
Speaker drops off Wi-FiSoft resetFactory reset
Speaker won't connect to Wi-Fi during setupMove closer to router, restart routerFactory reset
You're selling or giving away the speaker—Factory reset
You want to move the speaker to a different room or account—Factory reset

Frequently Asked Questions

Will a soft reset erase my Wi-Fi network or room name?

No. A soft reset only restarts the speaker. Your Wi-Fi network, room name, and any paired speakers stay the same. You'll use a soft reset when the speaker is acting slow or unresponsive but you don't want to set it up again.

Do I need to reset the speaker if I'm just moving it to a different room?

No. You can move the Sonos Move to a different room without resetting it. Just open the Sonos app, go to Settings, select the speaker, and change the room name. The speaker will stay connected to your Wi-Fi and your account.

What if I forget my Wi-Fi password after a factory reset?

You'll need your Wi-Fi password to reconnect the speaker after a factory reset. If you don't remember it, you can reset your router to see the default password, or log into your router's settings page from a computer or phone. Check your router's manual or the sticker on the back for the default login.

Can I undo a factory reset?

No. A factory reset is permanent and erases all settings. If you reset by accident, you'll need to set up the speaker again using the Sonos app. Your old settings won't come back, but if you had the speaker in a system with other Sonos speakers, you can add it back to that system during setup.

How long does it take to set up the speaker after a factory reset?

Setup usually takes five to ten minutes. The Sonos app will search for the speaker (one to two minutes), you'll name the room and enter your Wi-Fi password (two to three minutes), and the speaker will connect and read any updates (two to five minutes). The time depends on your Wi-Fi speed and whether the speaker needs a software update.