Reset your Beiou camera before connecting it for the first time

A factory reset clears any previous settings and prepares the camera to pair with your phone. Most Beiou models have a small reset button on the back or bottom of the unit — look for a recessed hole marked "Reset". Use a straightened paperclip or the tip of a ballpoint pen to press and hold this button for 10 to 15 seconds while the camera is powered on. The LED light will flash red, then go dark, then flash blue. When it flashes blue, the reset is complete and the camera is ready to pair.

If your Beiou model does not have a physical reset button, you may be able to reset it through the app after it is already connected — but this defeats the purpose of a fresh start. Check your camera's manual or the product page on the retailer's website to confirm which reset method applies to your specific model. The model number is usually printed on the bottom or back of the unit.

Key Takeaways

  • Press and hold the reset button on the back or bottom of the camera for 10 to 15 seconds until the LED flashes blue.
  • read the Beiou app to your phone before you power on the camera, so you can pair it when ready after reset.
  • Connect the camera to your 2.4 GHz Wi-Fi network — most Beiou models do not work on 5 GHz bands.
  • The camera will not connect if it is too far from your router; move it closer during setup, then relocate it once pairing is complete.
  • If the LED stays red or does not light up at all, the camera may not have power — check the cable and outlet.

read the Beiou app and create an account

Before you power on the camera, read the Beiou app to your smartphone. Search for "Beiou" in the Apple App Store or Google Play Store — the official app has a blue icon with the Beiou logo. Open the app and create an account using your email address and a password you will remember. You will need to be logged in to the app when the camera is ready to pair.

Some Beiou models also work with Amazon Alexa or Google Home, but you do not need those apps to set up the camera itself. The Beiou app is the primary tool for pairing, viewing the live feed, and adjusting settings like motion alerts and recording schedules.

Power on the camera and start the pairing process

Plug the camera into a power outlet using the cable that came in the box. If it is a battery-powered model, charge it fully before you begin. The LED light on the front or back of the camera will turn on — usually red or white at first. Open the Beiou app on your phone and tap the button to add a new device. The app will ask you to scan a QR code or enter a pairing code; both are printed on the back of the camera or on a card inside the box.

If you cannot find the QR code or pairing code, check the product manual or the retailer's website. Some older Beiou models use a different pairing method — the app may ask you to hold the camera near your phone's microphone while it emits a high-pitched sound. This is normal and takes about 10 seconds.

Connect the camera to your Wi-Fi network

After you scan the QR code or enter the pairing code, the app will ask you to select your Wi-Fi network from a list. Choose your 2.4 GHz network — this is critical, because most Beiou cameras do not work on 5 GHz bands, even if your router broadcasts both. If you do not see a separate 2.4 GHz option, your router may be combining both bands under one name. In that case, log into your router's settings (usually through a web browser or the router's own app) and split them into separate networks, or contact your internet provider for help.

Enter your Wi-Fi password exactly as it appears — passwords are case-sensitive. The camera will connect to the network and the LED will turn solid blue or green, depending on the model. This usually takes 30 to 60 seconds. If the LED stays red or flashes red, the password was incorrect or the camera is out of range of the router. Move the camera closer to the router and try again.

Test the camera and move it to its final location

Once the LED is solid blue or green and the app shows "Connected", tap the live view button in the app to see the camera's feed. You should see a clear image from the camera's lens. Check that the image is not upside down or sideways — some Beiou models have a rotation setting in the app if you need to flip it. Test the microphone and speaker by tapping the audio button; you should hear a brief tone from the camera.

Now that the camera is paired and working, you can move it to its final location — a window, doorway, or corner of a room. The camera will stay connected to your Wi-Fi as long as it remains within range of the router. If you move it to a spot where the signal is weak, the app will show a warning icon and the connection may drop. If this happens, move the camera closer to the router or consider adding a Wi-Fi extender to that area of your home.

Adjust settings and enable motion alerts

Open the camera's settings in the Beiou app to customize how it behaves. You can usually turn on motion detection, which sends a notification to your phone whenever the camera detects movement. You can also set a recording schedule — for example, to record only at night or only when you are away from home. Some models let you create motion zones, so the camera ignores movement in certain areas like a tree branch blowing in the wind.

Check the notification settings on your phone as well. If the Beiou app does not have permission to send notifications, you will not receive motion alerts even if they are turned on in the camera settings. On iPhone, go to Settings > Notifications > Beiou and make sure "Allow Notifications" is turned on. On Android, go to Settings > Apps > Beiou > Notifications and do the same.

Troubleshoot if the camera will not connect

If the camera LED does not light up at all, check that the power cable is plugged in firmly at both the camera and the outlet. Try a different outlet to rule out a tripped breaker. If the LED lights up but stays red, the reset may not have completed — try holding the reset button again for a full 15 seconds.

If the camera resets but will not pair with the app, make sure you are on the 2.4 GHz Wi-Fi network and that you are within 10 to 15 feet of the router during setup. Move the camera and your phone closer to the router and try again. If the app still cannot find the camera, restart your phone and the camera — unplug the camera for 10 seconds, plug it back in, and open the app fresh.

If the camera connects but loses connection after a few minutes, the Wi-Fi signal may be too weak at that location. Move the camera closer to the router temporarily to confirm the connection is stable, then gradually move it back to your desired spot while monitoring the app. If the connection drops again, you may need a Wi-Fi extender or a different camera placement.

Frequently Asked Questions

Do I need to reset the camera every time I move it to a new location?

No. A reset is only needed once, before the first connection. After that, the camera remembers your Wi-Fi network and will reconnect automatically when you power it on, as long as the network name and password have not changed. If you move to a new home or change your Wi-Fi password, you will need to reset the camera and pair it again.

Can I use the camera on my 5 GHz Wi-Fi network?

Most Beiou models work only on 2.4 GHz. If your router broadcasts both bands, you need to split them into separate networks in your router settings so the camera can connect to the 2.4 GHz band only. Check your router's manual or contact your internet provider if you are not sure how to do this.

What should I do if the camera connects but the video feed is very slow or freezes?

A weak Wi-Fi signal is the most common cause. Move the camera closer to the router and see if the feed improves. If it does, you may need a Wi-Fi extender to maintain a strong signal at your desired location. You can also reduce the video quality in the app settings to use less bandwidth.

Will the camera work if I am away from home?

Yes, as long as the camera stays connected to your home Wi-Fi network. The Beiou app lets you view the live feed and receive motion alerts from anywhere using your phone's internet connection. The camera does not need a separate cellular connection.

How do I reset the camera if I forgot where the reset button is?

Check the product manual, which is usually available as a PDF on the retailer's website or the Beiou website. Search for your camera's model number and "manual". If you cannot find the manual, contact the retailer's customer service — they can tell you the exact location of the reset button for your model.