The battery in your Blink doorbell lasts about two years before it needs replacing

Your Blink doorbell runs on two AA batteries that sit inside the device behind the faceplate. When the battery gets low, the Blink app sends you a notification — usually weeks before the doorbell stops working entirely. Replacing them takes about five minutes and requires no tools beyond what you already have at home.

The process is the same whether you own a Blink Video Doorbell, Blink Video Doorbell (2nd Gen), or Blink Wired Doorbell with battery backup. Even if your doorbell is hardwired to your home's electrical system, the battery backup compartment works the same way. You do not need to disarm anything, call anyone, or reset the device after you swap the batteries.

Key Takeaways

  • Blink doorbells use two standard AA batteries that you can buy at any grocery store or pharmacy.
  • The app notifies you when batteries are low, giving you time to replace them before the doorbell stops working.
  • You access the batteries by removing the faceplate, which usually twists or slides off without tools.
  • After you insert new batteries, the doorbell reconnects to your network automatically within a few seconds.
  • Battery life is typically two years under normal use, though frequent video recording or live view drains them faster.

What you need before you start

Gather two fresh AA batteries. Alkaline batteries (the standard kind sold everywhere) work fine. Some people use rechargeable AA batteries instead, which is cheaper over time but requires you to charge them separately. Both types work equally well in the Blink doorbell.

You do not need a screwdriver, wrench, or any other tool. The faceplate comes off by hand. Have your phone nearby so you can check the app after you finish, though this is optional — the doorbell will work whether or not you verify it in the app.

How to remove the faceplate and access the battery compartment

Look at the front of your doorbell. The faceplate is the plastic cover that shows the Blink logo. On most models, you will see a small seam or line running around the edge where the faceplate meets the main body.

Place your fingernail or the edge of a plastic card (like a gift card) into that seam at the bottom of the faceplate. Gently pry upward. The faceplate will slide up and off. If it feels stuck, try a different spot along the seam — sometimes one corner comes free more easily than another. Do not force it; if you meet real resistance, you are probably trying to unscrew something that should slide instead.

Once the faceplate is off, you will see the battery compartment directly behind it. It is a small plastic tray with two slots, one for each AA battery. The batteries sit horizontally, with the positive end (the flat end marked with a + symbol) facing toward you.

Removing old batteries and installing new ones

Gently pull the old batteries straight out toward you. They should come free with light pressure. If one is stuck, try tilting it slightly as you pull — sometimes they sit at a small angle.

Insert the two new AA batteries into the same slots, positive end facing you. They will click or snap into place when seated correctly. You should feel a small resistance as you push them in, and they will sit flush with the compartment — not sticking out.

Slide the faceplate back down over the battery compartment. It should slide smoothly and sit flush with the main body when fully seated. You will hear or feel a small click when it locks into place on most models.

What happens after you replace the batteries

The doorbell reconnects to your home network automatically. This usually takes 10 to 30 seconds. You do not need to do anything — no button pressing, no app actions, no waiting for a technician. The device straightforward comes back online on its own.

Open the Blink app on your phone and look at your doorbell in the device list. The battery indicator should now show "good" or display a full battery icon instead of the low-battery warning you saw before. If the app still shows low battery after a minute, close the app completely and reopen it — sometimes the display takes a moment to refresh.

Test the doorbell by pressing the button. You should hear a chime inside your home (if you have one set up) and see a notification in the app. If you do not hear anything or see a notification, try pressing the button again — occasionally the first press after a battery change takes a few extra seconds to register.

Why your batteries drain faster than expected

If you find yourself replacing batteries more often than every two years, your usage pattern is probably the reason. Each time you view a live video feed from the doorbell, record a clip, or enable motion detection recording, the battery drains faster. A doorbell in a high-traffic area with frequent motion alerts will need new batteries sooner than one on a quiet street.

Cold weather also drains AA batteries faster than warm weather. If you live somewhere with harsh winters, expect to replace batteries in fall rather than waiting until spring. Alkaline batteries perform worse in cold than rechargeable batteries do, so if you live in a cold climate, switching to rechargeable AA batteries may extend the time between replacements.

If your doorbell is hardwired to your home's electrical system, the battery compartment is a backup that should rarely drain. If you find the backup batteries depleting regularly, it usually means your hardwired connection is loose or disconnected — contact an electrician to check the wiring rather than replacing batteries every few months.

Troubleshooting if the doorbell does not come back online

If the doorbell does not reconnect to your network after five minutes, remove the batteries again and wait 30 seconds. Reinsert them and wait another minute. This resets the device's connection and usually solves the problem.

If the doorbell still does not appear in your app, check that your home Wi-Fi network is working. Walk to another room and see if other smart devices or your phone can connect to the internet. If your Wi-Fi is down, the doorbell cannot reconnect until it comes back up.

If your Wi-Fi is working but the doorbell still will not connect, open the Blink app, go to your device settings, and look for a "reconnect" or "re-add device" option. Follow the on-screen steps to reconnect it. This is rare after a straightforward battery replacement, but it solves the problem when it happens.

Frequently Asked Questions

Can I use rechargeable batteries instead of alkaline?

Yes. Rechargeable AA batteries work in Blink doorbells and often last longer over time because you recharge them instead of buying new ones. The tradeoff is that you need a separate charger and must remember to charge them. Both types work equally well in the device.

Do I need to reset the doorbell after changing batteries?

No. The doorbell reconnects to your network automatically within a minute. You do not need to press any buttons, remove it from the app, or do anything else. straightforward replace the batteries and wait.

What if one battery is dead but the other is fine?

Replace both batteries at the same time, even if only one is low. Mixing old and new batteries causes the old one to drain the new one faster, and the doorbell may not work reliably. Always swap both at once.

How do I know when the batteries are actually dead?

The Blink app sends a notification when batteries are low, usually weeks before they stop working. You can also check the battery status in the app by opening your doorbell's settings. The doorbell will continue to work on low batteries for a while, but you should replace them as soon as you see the warning.

Will the doorbell stop recording if the batteries die?

If your doorbell is hardwired, it will keep recording even if the backup batteries die — the electrical connection powers it. If your doorbell runs on batteries only, it will stop working when the batteries are completely dead. You will not be able to see live video or receive motion alerts until you replace them.