What you need to install a Blink doorbell

A Blink doorbell connects to your home Wi-Fi and sends video to your phone when someone rings it. Installation takes 20 to 30 minutes and requires four things: the doorbell itself, a smartphone with the Blink app, your Wi-Fi network name and password, and either existing doorbell wiring or a battery-powered model. If you have an old doorbell, you'll be replacing the button and camera unit, not the wiring behind your door frame.

Before you buy, check whether your door has existing wiring. Look at your current doorbell — if it has wires running into the wall, you have a wired setup. If it's a standalone button with no visible wires, you have a battery model. Blink makes both types. The wired version draws power from your home's existing doorbell circuit (usually 16 to 24 volts). The battery version runs on AA batteries and needs no wiring work at all.

You'll also need a smartphone running iOS 12 or later, or Android 8 or later, because the Blink app is how you see video and get notifications. The doorbell itself connects to 2.4 GHz Wi-Fi networks only — not 5 GHz, and not the newer Wi-Fi 6 standard if your router separates the bands. If your router combines both bands under one name, that usually works, but you may need to split them in your router settings if the doorbell won't connect.

Key Takeaways

  • Blink doorbells connect to 2.4 GHz Wi-Fi only, so check your router settings before installation if you have a dual-band network.
  • Wired models use your existing doorbell circuit and need you to turn off power at the breaker before touching any wires.
  • Battery models need no wiring work but require AA batteries and monthly charging checks.
  • The Blink app must be installed on your phone before you start, and you need your Wi-Fi password ready.
  • Installation takes 20 to 30 minutes for a wired model, or 5 minutes for a battery model if you're just mounting it on the wall.

Installing a wired Blink doorbell

Turn off power to your doorbell at the breaker box before you touch anything. Look for a breaker labeled "doorbell" or "front door" — if you can't find it, turn off the main breaker instead. Test your old doorbell to confirm the power is off. If it still rings or lights up, you haven't found the right breaker yet.

Remove your old doorbell button by unscrewing it from the wall or door frame. You'll see two wires connected to the back — one is usually red or black, the other is usually green or white. Loosen the screws holding these wires and pull them free. Take a photo of which wire was connected to which terminal before you disconnect them. The wires themselves stay in the wall; you're only removing the button.

Connect the two wires to the back of the Blink doorbell unit. The Blink doorbell has two terminals labeled with symbols — one looks like a plus sign, the other like a minus sign. If your old doorbell had a red wire and a green wire, connect red to the plus terminal and green to the minus terminal. If you're not sure which wire is which, the Blink app will let you test the connection after installation, so you can swap them if the doorbell doesn't work.

Screw the Blink doorbell onto the wall or door frame where your old one was. Make sure it's level and tight. Turn the power back on at the breaker. Open the Blink app on your phone, tap the plus icon to add a device, and select "Doorbell." Follow the on-screen steps to connect it to your Wi-Fi. The doorbell will show a blue light when it's connecting, then a solid green light when it's ready.

Installing a battery-powered Blink doorbell

Battery models need no wiring work. Insert two AA batteries into the back of the unit — the battery compartment is usually on the back panel, held by a small screw. Close the compartment and screw it tight so water can't get in.

Mount the doorbell on your door frame or wall using the included bracket and screws. The bracket usually has a small level built in. Position it at the same height as your old doorbell, or at eye level if you're installing it for the first time. Drill pilot holes if you're mounting into brick or stone — don't drill directly into the wall without them, or the screws will crack the surface.

Open the Blink app, tap the plus icon, and select "Doorbell." Choose "Battery Powered" when prompted. Follow the on-screen steps to connect to Wi-Fi. The doorbell will show a blue light while connecting, then green when it's ready. Battery models take longer to connect than wired ones — up to two minutes is normal.

Connecting to Wi-Fi and testing

The Blink app will ask for your Wi-Fi network name and password during setup. Type your password exactly as it appears — capital letters, numbers, and special characters all matter. If the doorbell won't connect, the most common reason is a typo in the password. The second most common reason is that your router is set to 5 GHz only. Check your router settings and make sure 2.4 GHz is turned on.

Once the doorbell shows a green light, the app will ask you to test it. Press the doorbell button and watch your phone — you should see a live video within a few seconds. If you see video but the button didn't ring, or if the button rang but you didn't see video, check your phone's notification settings. Go to Settings, then Notifications, and make sure Blink has permission to send alerts.

If you installed a wired doorbell and the button doesn't ring at all, the wires may be reversed. Turn off the power at the breaker, swap the two wires at the back of the doorbell, turn the power back on, and test again. The app will still show video even if the wires are backwards — only the physical button stops working.

What happens after installation

The Blink doorbell sends video to your phone whenever someone presses the button or when motion is detected. You can adjust motion sensitivity in the app — higher sensitivity means more alerts, lower sensitivity means fewer false alarms from passing cars or wind-blown leaves. Most people set it to medium and adjust from there based on what they actually see.

Video is stored in the Blink cloud for 24 hours with a free account. If you want to save videos longer or read them, Blink offers a paid subscription called Blink Plus. Without it, videos disappear after a day. You can still see live video anytime by opening the app and tapping the doorbell.

Battery-powered models need a battery check every month or so. The app will tell you the battery level. Most people get three to six months per set of AA batteries, depending on how many times the doorbell is pressed or how much motion it detects. Wired models draw power from your home's electrical circuit and don't need battery checks.

Troubleshooting common installation problems

If the doorbell won't connect to Wi-Fi, restart your router by unplugging it for 30 seconds, then plugging it back in. Wait two minutes for it to fully restart. Then try connecting the doorbell again. If it still won't connect, check whether your router is broadcasting 2.4 GHz. Some newer routers default to 5 GHz only. Log into your router's settings (usually by typing your router's IP address into a web browser) and enable 2.4 GHz if it's turned off.

If you installed a wired doorbell and the power won't turn back on, you may have tripped the breaker. Go back to the breaker box and flip the doorbell breaker all the way off, then back on. If it trips again when ready, there may be a short circuit in the wiring. Turn the breaker off and call an electrician — don't try to fix it yourself.

If the doorbell connects to Wi-Fi but you don't see video, check your phone's internet connection. The Blink app needs a strong connection to your Wi-Fi to stream video. Move closer to your router and try again. If video still doesn't appear, restart the Blink app by closing it completely and opening it again. If that doesn't work, restart your phone.

Understanding what the doorbell records and stores

The Blink doorbell records video whenever the button is pressed or motion is detected. This video is sent to Blink's servers and stored in the cloud. Blink uses encryption to protect the video in transit, but the company can see the video if they choose to — they are not a zero-knowledge service. If privacy is a concern, understand that any cloud-connected doorbell works this way. The alternative is a doorbell that records only to local storage on your home network, but Blink does not make that model.

You can turn off motion detection in the app if you want the doorbell to record only when the button is pressed. This reduces the number of videos stored and gives you more control over what gets recorded. You can also set motion detection to turn off during certain hours — for example, you might turn it off during the day when you're home and turn it back on at night.

Frequently Asked Questions

Do I need a Blink subscription to use the doorbell?

No. The doorbell works without a paid subscription. You can see live video anytime and get notifications when someone rings the button. The free plan stores video for 24 hours. Blink Plus costs extra and stores video for longer, but it is not required for basic use.

What if my house doesn't have existing doorbell wiring?

Buy the battery-powered model instead of the wired model. It mounts on your door frame or wall with screws and needs no wiring work. Battery models are easier to install but require battery changes every few months.

Can I use the doorbell if my Wi-Fi is far from the front door?

Blink doorbells work best within 30 feet of your router. If your router is farther away, the doorbell may connect slowly or drop connection. You can buy a Wi-Fi extender to boost the signal near your front door, or move your router closer if possible.

What if I rent and can't drill holes or touch the wiring?

The battery-powered model can be mounted with adhesive strips instead of screws — Blink sells a mounting kit with strong adhesive that won't damage paint. You cannot install a wired model without touching the existing wiring, so stick with battery if you rent.

Does the doorbell work if my internet goes out?

No. The doorbell needs Wi-Fi to send video to your phone. If your internet is down, you won't see video or get notifications. The doorbell will still ring at your home if you have a chime connected to the wiring, but you won't see who's at the door on your phone.