The basic steps to get your Arlo camera online

To connect an Arlo camera to WiFi, you need the Arlo app on your phone, your WiFi network name and password, and the camera itself powered on and in pairing mode. The process takes about five minutes and happens entirely through the app — you do not need to touch a computer or log into your router.

Start by downloading the Arlo app (made by Arlo Technologies, owned by Netgear) from the Apple App Store or Google Play Store. Create an account or log in if you already have one. Then power on your camera and hold the sync button on the back for three seconds until the light blinks amber. Open the app, tap the plus icon to add a device, select your camera model, and scan the QR code on the camera or its box. The app will then ask for your WiFi network name and password, connect the camera, and confirm when it is online.

Key Takeaways

  • You need the Arlo app, your WiFi password, and a camera in pairing mode — the app walks you through each step in order.
  • The camera must be within range of your WiFi router during setup, though it can be moved after it connects.
  • If the connection fails, the most common causes are a typo in your WiFi password, the camera being too far from the router, or your router not broadcasting on the 2.4 GHz band that Arlo cameras use.
  • Once connected, the camera sends video to Arlo's servers, not directly to your phone — you are trusting Arlo with footage, not just your WiFi network.

Why your camera needs to be in pairing mode

Pairing mode tells the camera to listen for a new WiFi network instead of trying to reconnect to one it already knows. Without it, the camera will not respond to the app's setup instructions. On most Arlo models, you hold the sync button (a small recessed button on the back or bottom) for three seconds until the light changes from solid to blinking amber. Some older models use a reset button instead — check your manual if the sync button does not work.

The camera stays in pairing mode for about ten minutes. If the app does not find it within that window, power the camera off and start over. You do not need to reset the camera to factory settings unless it has been used before and is refusing to connect — a full reset erases all previous settings and is a last resort.

Checking your WiFi network before you start

Arlo cameras connect only to 2.4 GHz WiFi networks, not 5 GHz. Many modern routers broadcast both bands at once, often with the same network name. If your router is set to broadcast only 5 GHz, or if your network name appears twice in the app's list (one for each band), you need to either switch your router to 2.4 GHz or create a separate 2.4 GHz network with its own name.

You can check your router's settings by logging into its admin page — usually at 192.168.1.1 or 192.168.0.1 in a web browser, though the exact address and login are on a sticker on the router itself. Look for a wireless or WiFi settings section and confirm that 2.4 GHz is turned on. If you are not comfortable changing router settings, contact your internet provider's support line — they can walk you through it or do it remotely.

Your WiFi password is case-sensitive in the app. If you are not sure what it is, you can usually find it in your router's admin page or in the paperwork that came with the router. Write it down exactly as it appears before you start the setup process.

What to do if the camera will not connect

If the app cannot find the camera after you put it in pairing mode, the most likely cause is that the camera is too far from the router. Move it closer — within 15 to 20 feet — and try again. Walls, metal, and water (like a fish tank or radiator) weaken the signal, so a direct line of sight helps.

If the camera is close enough but still will not connect, double-check that you typed your WiFi password correctly. The app will not tell you if the password is wrong — it will just fail to connect. Power the camera off, wait ten seconds, power it back on, hold the sync button again, and try once more with the password written down in front of you.

If the password is correct and the camera is in range, restart your router by unplugging it for 30 seconds, plugging it back in, and waiting two minutes for it to fully boot. Then try the camera setup again. If that does not work, check whether your router has a guest network enabled — sometimes the app connects to the guest network instead of your main one, and the two do not talk to each other. Disable the guest network temporarily and try again.

Where your video actually goes after it connects

Once the camera is online, it sends video to Arlo's servers in the cloud, not directly to your phone over your home WiFi. This means Arlo can see your footage, and so can anyone who gains access to your Arlo account. Your WiFi password protects the camera's connection to the internet, but it does not protect the video itself once it leaves your home.

Arlo stores video for a limited time depending on your subscription. The free tier keeps video for seven days. Paid plans (Arlo find and Arlo find Plus) keep it longer and add features like person detection and package detection. You can also read video to your phone or computer to keep it permanently, but the default is that Arlo holds it on their servers.

If you are concerned about privacy, review Arlo's privacy policy before you finish setup. You can also disable cloud storage and use only local storage if your camera model supports it, though this limits what you can see when you are away from home.

Moving the camera after it connects

Once the camera is connected and online, you can move it to its final location as long as it stays within WiFi range. You do not need to repeat the setup process. The camera will remember your WiFi network and reconnect automatically if it loses signal and then finds it again.

If you move the camera to a location where the WiFi signal is too weak, it will go offline. You can see this in the app — the camera's status will show as "offline" or "not connected." Move it closer to the router or consider adding a WiFi extender to reach the area where you want the camera. Some people also use a second router set to the same network name and password to extend coverage, though this is more complex to set up.

Reconnecting after a power outage or WiFi reset

If your WiFi goes down or your router loses power, the camera will go offline. When your internet comes back, the camera should reconnect automatically within a few minutes — you do not need to do anything. Check the app to confirm it shows as "online" again.

If you reset your router or change your WiFi password, the camera will not reconnect automatically because it no longer knows the password. You will need to put it back in pairing mode and run through the setup process again, just as you did the first time. This is why writing down your WiFi password in a safe place is useful — you will need it again if your router settings change.

Frequently Asked Questions

Can I connect the camera to a 5 GHz network instead of 2.4 GHz?

No. Arlo cameras only support 2.4 GHz. If your router broadcasts both bands, you need to make sure 2.4 GHz is turned on and select it in the app. Some routers let you create a separate network name for each band so you can choose which one to use.

What if I forget my WiFi password?

You can reset your WiFi password through your router's admin page (usually at 192.168.1.1) or by calling your internet provider. You will need the router's admin password, which is often on a sticker on the device itself. Once you change the password, you will need to reconnect the camera using the new one.

Does the camera work if my internet is down?

No. The camera needs an internet connection to send video to Arlo's servers and to your phone. If your WiFi or internet goes out, the camera will go offline and you will not be able to see live video or recordings until the connection comes back.

Can I use a hidden WiFi network?

Yes, but you will need to type the network name manually in the app instead of selecting it from a list. Make sure you type it exactly as it is set up on your router, including capital letters and special characters.

What happens if the camera is too far from the router?

The camera will not connect during setup. If it connects but then goes offline after you move it, it is out of range. Move it closer to the router or add a WiFi extender to strengthen the signal in that area.