Your printer is connected to WiFi but Windows or Mac still says it's offline

When your HP printer appears offline despite being on the same WiFi network, the problem is usually not the WiFi itself — it's a broken conversation between your computer and the printer. Your device can see the network, but the printer software on your computer has lost track of where the printer is, or the printer has stopped responding to print jobs. This happens because printer drivers get out of sync, the printer needs a restart, or your computer's firewall is blocking the connection.

The fix depends on which device is causing the problem: the printer, the computer, or the connection between them. Most of the time, restarting both devices solves it. If that doesn't work, you'll need to check whether your printer is actually awake and connected, whether your computer knows where to find it, and whether anything is blocking the path between them.

Key Takeaways

  • Restart your printer first by turning it off, waiting 30 seconds, and turning it back on — this clears temporary connection problems that cause the offline status.
  • Check your printer's display panel or HP Smart app to confirm it is actually connected to your WiFi network, not just powered on.
  • On Windows, remove the printer from Settings and add it again, which forces your computer to rediscover it and reinstall the connection.
  • On Mac, go to System Settings > Printers & Scanners, select your printer, and click the minus button to remove it, then add it again.
  • If your printer still shows offline after restart and removal, check whether Windows Defender Firewall or your antivirus is blocking the printer port.

Restart both the printer and your computer in the right order

Start with the printer. Turn it off completely, wait 30 seconds, then turn it back on. This clears the printer's memory and resets its WiFi connection. While the printer is restarting, restart your computer as well. Shut it down fully, wait 30 seconds, then power it back up. The delay matters because it gives both devices time to clear their temporary memory.

Once both are back on, give them two minutes to reconnect to each other before you try to print. Your printer will reconnect to your WiFi automatically if it was connected before the restart. Your computer will rediscover the printer on the network. If the offline status clears after this, the problem was a temporary glitch and you're done.

Confirm your printer is actually connected to WiFi, not just powered on

A printer that is on and plugged in is not the same as a printer that is connected to WiFi. Check your printer's display panel — most HP printers show a WiFi icon when they are connected to the network. If you see an X through the WiFi icon, or no WiFi icon at all, your printer has lost its connection to the network.

You can also check the HP Smart app on your phone or computer. Open the app, look for your printer in the list, and see what it says. If it shows "Connected" or displays the printer's status, your printer is on the network. If it says "Offline" or "Not Found," the printer is not connected to WiFi yet. If this is the case, go to your printer's settings menu, select WiFi, and reconnect it to your network using your WiFi password. You may need to consult your printer's manual for the exact menu path, as it varies by model.

Remove and re-add the printer on Windows

On Windows, your computer stores a record of where your printer is and how to talk to it. If that record gets corrupted, Windows will keep looking for the printer in the wrong place and report it offline even though it's on the network. The fix is to delete that record and let Windows find the printer again from scratch.

Go to Settings > Devices > Printers & Scanners. Find your HP printer in the list, click on it, and click "Remove device." Wait a few seconds. Then click "Add a printer or scanner" at the top of the page. Windows will search for printers on your network. When it finds your HP printer, click on it and select "Add device." Windows will install the connection and your printer should no longer show as offline.

If Windows does not find your printer during the search, your printer may not be connected to WiFi yet. Go back and check the printer's display panel or the HP Smart app to confirm it is on the network before trying again.

Remove and re-add the printer on Mac

On Mac, the process is similar but the menu is different. Go to System Settings > Printers & Scanners. Find your HP printer in the list on the left side. Click on it to select it, then click the minus button (–) below the list to remove it. Close the window and wait 10 seconds.

Open System Settings > Printers & Scanners again and click the plus button (+) to add a printer. Your Mac will search for available printers on the network. When it finds your HP printer, click on it and click "Add." Your Mac will install the connection. Your printer should now appear as online and ready to print.

Check whether your firewall is blocking the printer

Windows Defender Firewall and third-party antivirus programs can block communication between your computer and your printer, even though both are on the same WiFi network. The firewall sees the printer trying to send data to your computer and stops it, thinking it's a threat.

To check Windows Defender Firewall, go to Settings > Privacy & Security > Windows Defender Firewall > Allow an app through firewall. Look for any HP or printer-related programs in the list. If you see them, make sure both "Private" and "Public" are checked next to them. If you don't see them, click "Allow another app" and browse to find the HP printer software (usually located in Program Files > HP). Add it and check both boxes.

If you use third-party antivirus software like Norton, McAfee, or Bitdefender, open that program and look for a firewall or network protection section. Check whether it is blocking HP software or printer ports. The exact steps vary by program, but most have a list of blocked apps or ports that you can view and modify. You may need to add HP software to an allowed list or disable the firewall temporarily to test whether it is the cause.

Update or reinstall your HP printer driver

Your printer driver is the software that tells your computer how to talk to your printer. If the driver is outdated or corrupted, your computer may not be able to find the printer even though it is on the network. Updating or reinstalling the driver often fixes the offline problem.

On Windows, go to Settings > Devices > Printers & Scanners, find your printer, click on it, and select "Open queue." At the top, click "Printer" and select "See what's printing." If there are stuck print jobs in the queue, click on each one and press Delete. Then go back to Settings > Devices > Printers & Scanners, right-click your printer, and select "Update driver." Windows will search for the latest driver online and install it.

On Mac, go to System Settings > Printers & Scanners, select your printer, and click "Options & Supplies." Click "Driver" and check whether an update is available. If one is, click "Update." You can also visit HP's website, search for your printer model, and read the latest driver directly. read the file, open it, and follow the installer's instructions.

Frequently Asked Questions

Why does my printer say offline when I can see it on my WiFi network?

Your printer is connected to WiFi, but your computer's printer driver has lost the connection or cannot reach the printer. Restarting both devices usually fixes this. If it doesn't, remove the printer from your computer's settings and add it again so your computer rediscovers it.

Can a weak WiFi signal cause my printer to show offline?

Yes. If your printer is far from your router or blocked by walls, it may lose connection to WiFi. Move your printer closer to the router or remove obstacles between them. You can also check your printer's display panel to see the WiFi signal strength — if it shows one or two bars, move it closer to the router.

What if my printer is offline in the HP Smart app too?

This means your printer is not connected to WiFi at all, not just offline to your computer. Go to your printer's settings menu, select WiFi, and reconnect it to your network using your WiFi password. Once it shows connected in the HP Smart app, try adding it to your computer again.

Do I need to uninstall and reinstall HP software to fix the offline problem?

Usually not. Removing and re-adding the printer in your computer's settings is faster and solves most offline problems. Only reinstall HP software if the driver update did not work and the printer still shows offline after restart and removal.

Why does my printer keep going offline even after I fix it?

This usually means your printer is losing its WiFi connection repeatedly, often because it is too far from the router or your router is dropping connections. Move the printer closer to the router, restart your router, or check whether other devices on your network are having connection problems. If the problem persists, your router may need a firmware update or replacement.