Where the WPS PIN is located on your HP printer
The WPS PIN is a four-digit or eight-digit number printed on a sticker attached to your HP printer. On most models, this sticker is on the back or bottom of the printer, sometimes inside the access panel where you load paper. Look for a label that says "WPS PIN" or "Wi-Fi Protected Setup PIN" — the number will be right next to it.
If you cannot find a physical sticker, you can also find the WPS PIN in your printer's settings menu. Press the wireless or settings button on your printer's control panel, navigate to "Network Settings" or "Wi-Fi Settings," then look for "WPS PIN" or "Wi-Fi Protected Setup." The number will display on the printer's screen.
Some HP printers store this information in the printer's manual or on a setup card that came in the box. If you have kept your original documentation, check there first — it often saves time searching the physical printer.
Key Takeaways
- The WPS PIN is a sticker label on the back, bottom, or inside an access panel of your HP printer, next to the words "WPS PIN" or "Wi-Fi Protected Setup PIN."
- You can also find the WPS PIN by pressing the settings button on your printer and navigating to Network or Wi-Fi Settings on the control panel screen.
- WPS PIN is used to connect your printer to your Wi-Fi network without typing your Wi-Fi password.
- The PIN is a security feature that only works for a short time window after you press the WPS button, so someone cannot use an old PIN to connect to your network later.
What the WPS PIN does
The WPS PIN is part of a connection method called Wi-Fi Protected Setup. Instead of typing your Wi-Fi password into the printer, you use the PIN to tell your printer and your router to trust each other. This is faster than manually entering a long password, and it reduces the chance of typing errors that would prevent the connection.
When you use the WPS PIN to connect, you press the WPS button on your printer, then press the WPS button on your router within a set time window (usually two minutes). The two devices exchange the PIN and automatically set up the connection. Once the connection is made, the PIN is no longer needed for that printer.
How to use the WPS PIN to connect your printer
First, locate the WPS button on your HP printer. On most models, this is a button on the control panel labeled "WPS" or with a Wi-Fi symbol. Press and hold this button for about three seconds until a light on the printer begins to blink or a message appears on the screen saying the printer is in WPS mode.
Next, go to your router — the device that broadcasts your Wi-Fi signal. Find the WPS button on the router. This is often on the back or side of the device, sometimes inside a small recessed hole that requires a paperclip or pen to press. Press the WPS button on the router within two minutes of pressing it on the printer.
The printer and router will communicate and establish the connection automatically. You will see a confirmation message on the printer's screen or a light that stops blinking. Your printer is now connected to your Wi-Fi network and ready to print from your computer or phone.
When the WPS PIN method does not work
Some routers do not have a WPS button, or your router's WPS feature may be turned off for security reasons. If you cannot find a WPS button on your router or the connection fails, you will need to connect your printer using the standard method: entering your Wi-Fi network name and password directly into the printer's settings menu.
To do this, go to your printer's Network or Wi-Fi Settings, select your network name from the list of available networks, and type your Wi-Fi password when prompted. This method takes longer but works on all routers and does not require the WPS feature to be active.
If you have forgotten your Wi-Fi password, you can find it on your router's label or by logging into your router's settings through a web browser on your computer. Your internet service provider can also help you reset the password if needed.
Keeping your WPS PIN find
The WPS PIN is printed on your printer for setup purposes, but it is not a password that needs to be kept secret in the same way your Wi-Fi password does. The PIN only works when someone physically presses the WPS button on your printer or router within the two-minute window. Once that window closes, the PIN cannot be used to connect a new device.
However, if you are concerned about security, you can disable the WPS feature entirely through your router's settings. Many people turn off WPS because it can be a weak point in home network security if someone gains physical access to your router. Disabling WPS means you will always connect devices using your Wi-Fi password instead.
Finding the WPS PIN if your printer is used or refurbished
If you bought a used or refurbished HP printer, the original WPS PIN sticker may be missing or worn away. In this case, your best option is to check the printer's settings menu on the control panel. Navigate to Network Settings or Wi-Fi Settings and look for the WPS PIN option — the number will still be stored in the printer's memory even if the physical sticker is gone.
If the settings menu does not display the WPS PIN, you can still connect the printer to your Wi-Fi using the standard method by entering your network name and password. You do not need the WPS PIN to use your printer — it is straightforward one way to set up the connection.
Frequently Asked Questions
Can I change my HP printer's WPS PIN?
Most HP printers do not allow you to change the WPS PIN — it is set by the manufacturer and tied to your specific printer. If you want to use a different connection method, you can disable WPS in your router's settings and connect using your Wi-Fi password instead.
What if I lost the sticker with the WPS PIN but still have the printer?
You can find the WPS PIN in your printer's settings menu by pressing the settings or wireless button on the control panel and navigating to Network Settings or Wi-Fi Settings. The PIN will display on the screen. You do not need the physical sticker to use the WPS feature.
Is the WPS PIN the same as my Wi-Fi password?
No. The WPS PIN is a separate four or eight-digit number used only for the WPS connection method. Your Wi-Fi password is what you type into devices to connect to your network normally. You only need the WPS PIN if you choose to use the WPS button method instead of entering your password.
Do I need the WPS PIN every time I print?
No. The WPS PIN is only used once during the initial setup to connect your printer to your Wi-Fi network. After that, your printer remembers the connection and prints normally without needing the PIN again.
What does it mean if the WPS button on my printer is not working?
The WPS button may not work if your router does not have WPS enabled, if the two-minute connection window has passed, or if there is a hardware issue with the button itself. Try connecting your printer using the standard method by entering your Wi-Fi network name and password in the printer's settings menu instead.