How to replace your HP printer ink cartridge
Most HP printers hold the cartridge in a carriage that moves across the printer when you open the access door. You remove the old cartridge by pressing down on it until it clicks, then pull it straight out. The new cartridge slides in at an angle, pushes down until it clicks again, and you close the door. The whole process takes about two minutes and requires no tools.
The steps differ slightly between inkjet and LaserJet models, but the basic motion is the same: open, press, remove, insert, close. This guide covers both types so you can find the exact steps for what you own.
Key Takeaways
- Inkjet cartridges sit in a moving carriage inside the printer and click into place when fully inserted.
- LaserJet toner cartridges are larger and sit in a fixed slot at the front or side of the printer.
- You do not need to turn off the printer for most HP models, though some older ones require it.
- The cartridge number is printed on the old cartridge itself, so you can match it exactly when you buy a replacement.
- If the printer does not recognize the new cartridge, remove it, wait 30 seconds, and reinsert it.
Replacing an ink cartridge in an HP inkjet printer
Open the printer access door or lid. On most HP inkjet models, this is the top cover. The carriage inside will move to the center of the printer automatically, and you will see the cartridges lined up in a row. Wait for the carriage to stop moving before you touch anything.
Look at the cartridge you need to replace. Press down on it firmly until you hear or feel a click. The cartridge will tilt up slightly. Grasp it and pull it straight out toward you. Do not twist or angle it — straight out is the only motion that works.
Take the new cartridge out of its box and remove the plastic tape or seal from the bottom. This tape prevents ink from leaking during shipping. Slide the new cartridge into the empty slot at a slight downward angle, then press down until it clicks into place. The carriage will hold it firmly once it is seated.
Close the printer door or lid. Most HP printers will run a brief setup sequence and may print a test page. If the printer shows an error message about the cartridge, open the door again, remove the cartridge, wait 30 seconds, and reinsert it. This resets the cartridge sensor.
Replacing a toner cartridge in an HP LaserJet printer
Open the front access panel or the side panel, depending on your model. The toner cartridge is much larger than an inkjet cartridge and sits in a fixed slot rather than a moving carriage. You will see a green or blue handle on the cartridge.
Grasp the handle and pull the cartridge straight out toward you. Some models require you to lift a latch or lever first — check your printer's front panel for any levers in the up position. Once the cartridge is out, set it aside on a flat surface. Toner powder can spill if you tip the cartridge, so keep it level.
Remove the new cartridge from its box and shake it gently side to side about 10 times. This distributes the toner powder evenly inside. Remove any plastic seals or tape from the cartridge. Slide the new cartridge into the slot, pushing it straight in until you hear a click or feel it seat firmly. Close the access panel.
The printer will run a setup sequence. If it shows a low-toner warning when ready after installation, the cartridge is working correctly — this is normal for a new cartridge and does not mean there is a problem.
Finding the correct cartridge number for your printer
The cartridge number is printed on the side or bottom of the old cartridge itself. Look for a number that starts with the letters "HP" or "XL" — for example, HP 64 or HP 65XL. Write this number down or take a photo of it before you remove the cartridge.
You can also find the cartridge number in your printer's settings menu. On most HP printers, go to Settings or Setup, then look for Supplies, Cartridges, or Ink Status. The screen will show the cartridge numbers currently installed. If you cannot find this menu, check the manual that came with your printer or search the HP website for your specific model number.
When you buy a replacement, match the number exactly. Using the wrong cartridge number can cause the printer to reject it or print with incorrect colors. If you are unsure which cartridge goes in which slot, the printer manual shows a diagram of the cartridge positions.
What to do if the printer does not recognize the new cartridge
If the printer shows an error message like "Cartridge not recognized" or "Cartridge problem," the cartridge may not be fully seated. Open the printer door, remove the cartridge, and look at the metal contacts on the bottom of the cartridge and the contacts inside the printer slot. Wipe both sets of contacts gently with a dry, lint-free cloth. Reinsert the cartridge and close the door.
If the error persists, remove the cartridge again and wait 30 seconds before reinserting it. This gives the printer's sensor time to reset. If the printer still does not recognize it after two attempts, the cartridge itself may be defective. Contact the seller or manufacturer for a replacement.
Some older HP printers require you to turn off the printer, wait 10 seconds, and turn it back on after installing a new cartridge. Check your printer manual if the error message continues after reinserting the cartridge.
Storing old cartridges and avoiding common mistakes
Do not throw away the old cartridge when ready. Many retailers offer cartridge recycling programs, and some will give you a small discount on your next purchase if you bring in the old one. HP also runs a mail-back recycling program through their website.
If you need to store a cartridge for more than a few days, keep it in a cool, dry place in its original packaging if possible. Inkjet cartridges can dry out if left exposed to air for weeks. LaserJet toner cartridges should be kept upright and away from moisture.
The most common mistake is forgetting to remove the plastic seal or tape from the bottom of a new cartridge before inserting it. If you install a cartridge with the seal still attached, the printer will not recognize it and will show an error. The second most common mistake is inserting the cartridge at the wrong angle — always push straight in, not at an upward or downward tilt.
Frequently Asked Questions
Do I need to turn off my HP printer before replacing the cartridge?
Most modern HP inkjet printers do not require you to turn them off. The carriage will move to the center automatically when you open the door. However, some older models and all LaserJet printers benefit from being powered off first. If you are unsure, turning it off does no harm and takes only a few seconds.
What if I put the cartridge in the wrong slot?
The printer will show an error message or print with the wrong colors. Remove the cartridge, check the diagram in your manual or on the printer itself to see which slot is correct, and move it to the right position. The cartridge will work normally once it is in the correct slot.
Can I use a refilled or third-party cartridge in my HP printer?
Yes, but HP printers may show a warning message about non-genuine cartridges. The printer will usually still work, though some features like page-yield estimates may not be accurate. Third-party cartridges are often cheaper but may have different print quality or reliability than HP brand cartridges.
How do I know when to replace my cartridge?
The printer will show a low-ink or low-toner warning in the settings menu or on the printer's display panel. You can also check the ink level by opening the printer door and looking at the cartridge window if your model has one. Most printers will continue printing even after a low-ink warning, though print quality may fade.
What should I do if ink leaks from the cartridge?
If ink spills inside the printer, turn it off when ready and let it dry for several hours. Wipe up any visible ink with a dry cloth, but do not use water or cleaning solutions inside the printer. If ink has stained the paper path, you may need to run a cleaning cycle through the printer's maintenance menu once it is dry.