Find your printer model and cartridge type first

Before you buy new ink, you need to know which cartridges your printer uses. The fastest way is to look at the printer itself — most HP printers have a label on the front or back listing the model number. Write down that number or take a photo.

Once you have the model number, go to hp.com, click Support, and search for your printer. The page will show you exactly which cartridges fit. HP cartridges are numbered (like 62, 65, 302, 912) and come in black and color versions. Some printers use a single cartridge for all colors; others use separate black, cyan, magenta, and yellow cartridges.

You can also check inside the printer itself. Open the cartridge access door — usually on the front or top — and you will see the cartridges installed. The cartridge number is printed on the side of each one. Take a photo or write down the numbers so you have them when you shop.

Key Takeaways

  • Your printer model number appears on a label on the device itself, and HP's website will tell you which cartridges that model needs.
  • HP cartridges are sold by number (62, 65, 302, etc.) and you must buy the exact number your printer uses or the cartridges will not fit.
  • You can buy cartridges from HP directly, from retailers like Amazon or Staples, or from third-party sellers, and prices vary significantly between sources.
  • The cartridge access door is usually on the front or top of the printer, and you remove old cartridges by pressing down on them until they click out.
  • New cartridges come with a protective tape or cap that you must remove before inserting them, or the printer will not recognize them.

Where to buy HP cartridges and what to expect to pay

HP cartridges are sold at most retailers that carry printer supplies — Best Buy, Staples, Amazon, Walmart, and directly from hp.com. Prices vary widely. Buying directly from HP is usually the most expensive option. Retailers like Amazon and Staples often have lower prices, especially if you have a membership or catch a sale.

Third-party sellers also offer compatible cartridges that work in HP printers but are made by other companies. These are cheaper than genuine HP cartridges but may not last as long or print with the same color accuracy. Some printers will display a warning message if you use non-HP cartridges, but they will still work.

Before you buy, check the cartridge number on the box against the number you wrote down from your printer. A cartridge labeled 65 will not work in a printer that needs 62 cartridges. If you are unsure, take a photo of the cartridge in your printer to the store or show it to the retailer online.

How to open the cartridge access door and remove old cartridges

Turn off your printer and wait a few seconds for it to stop moving. Open the cartridge access door — on most HP printers this is a panel on the front or top of the machine. You may need to press a button or latch to open it. The door will swing or slide open, and you will see the cartridges inside.

The cartridges sit in a row in plastic holders. To remove a cartridge, press down on it until you hear or feel a click. The cartridge will swing down or pop out slightly. Grab it by the sides (not the nozzle at the bottom) and pull it straight out toward you. Do not touch the copper contacts or the nozzle — oils from your skin can damage them.

Set the old cartridge aside. If it still has ink, you can recycle it — most retailers that sell cartridges have a recycling bin near the register, or you can mail it back to HP through their cartridge return program. Do not throw it in the trash.

Install new cartridges and remove protective tape

Before you insert a new cartridge, check that it has a protective cap or tape on the nozzle (the part that points down). This tape keeps ink from drying out during shipping. You must remove this tape or the printer will not work. Peel off the tape or pop off the cap — it should come away easily.

Hold the new cartridge by its sides and slide it into the empty holder at an angle, nozzle first. Push it down gently until it clicks into place. You should hear or feel a solid click when it seats properly. Repeat this for each cartridge you are replacing.

Once all new cartridges are installed, close the cartridge access door. The printer may take a few seconds to recognize the new cartridges and run a cleaning cycle. You may hear the printer moving or beeping — this is normal. Wait until the printer is quiet and still before you try to print.

What to do if the printer does not recognize the new cartridges

If your printer displays an error message after you install new cartridges, the most common cause is that you did not remove the protective tape. Open the cartridge door again, remove the cartridge that is causing the error, and check for any remaining tape or plastic on the nozzle. Peel it off completely and reinstall the cartridge.

If the cartridge is still not recognized, make sure you installed it in the correct slot. Each cartridge holder is labeled with the color it should hold — black, cyan, magenta, or yellow. If you put a color cartridge in the black slot, the printer will reject it. Move the cartridge to the correct holder and try again.

If you are using a third-party cartridge and the printer still will not recognize it, the cartridge may be incompatible with your specific printer model. Check the box to confirm the cartridge number matches your printer model exactly. If it does and the printer still rejects it, you may need to return it and buy a genuine HP cartridge instead.

How to check ink levels and know when to replace cartridges

Most HP printers show ink levels on a screen on the printer itself or through software on your computer. On the printer, look for a button labeled "Info" or a menu option for "Supplies" or "Ink Levels." On your computer, open the HP printer software (usually called HP Smart or HP Printer Assistant) and look for a supplies or cartridge status section.

The software will show you a bar or percentage for each cartridge. When a cartridge reaches about 20 percent, the printer may display a warning message. You do not have to replace it when ready — you can usually print for a while longer. However, if you wait until the cartridge is completely empty, the printer may not recognize a new cartridge right away and may require a cleaning cycle.

Some printers have a low-ink warning that appears on your computer when you try to print. This is a good time to order a replacement cartridge so you have it on hand before the current one runs out completely.

Troubleshooting common problems after cartridge replacement

If your prints come out faded or streaky after replacing a cartridge, the printer may need a cleaning cycle. Most HP printers have a "Clean Cartridges" or "Maintenance" option in the settings menu. Run this cycle — it uses a small amount of ink to clean the nozzles and usually fixes the problem.

If one color is missing from your prints (for example, everything prints in black and white), check that the color cartridge is installed in the correct slot and that the protective tape was fully removed. If the cartridge is in the right place and the tape is gone, try removing and reinstalling the cartridge. Sometimes it does not seat properly on the first try.

If the printer still will not print after you replace the cartridges, restart the printer by turning it off, waiting 30 seconds, and turning it back on. This resets the printer's memory and often fixes recognition issues. If the problem continues, check the HP support page for your specific model — there may be a firmware update or a specific troubleshooting step for your printer.

Frequently Asked Questions

Can I use cartridges from a different brand in my HP printer?

Some third-party cartridges work in HP printers, but they must be labeled as compatible with your specific printer model number. Cartridges from other brands like Canon or Epson will not fit. Check the box to confirm it says "compatible with HP [your model number]" before you buy.

What happens if I put the wrong cartridge number in my printer?

The cartridge will not fit into the holder, or if it does fit, the printer will display an error message and will not print. Always check the cartridge number on the box against the number your printer needs. If you are unsure, ask the retailer or check your printer's manual.

Do I need to replace all cartridges at once or just the empty one?

You only need to replace the cartridge that is empty or low. You do not have to replace the others. However, if multiple cartridges are low at the same time, it may be more convenient to replace them all at once so you do not have to open the printer again soon.

How long does a new cartridge last?

This depends on how much you print. HP cartridges are rated for a certain number of pages — for example, a standard cartridge might print 200 pages, while a high-capacity cartridge prints 400 pages. The actual number of pages you get depends on how much color you use and how full your pages are.

Can I refill an empty cartridge instead of buying a new one?

You can buy refill kits that let you add ink to an empty cartridge, but this is messy and often does not work well. The cartridge may not recognize the refilled ink, or the print quality may suffer. For most people, buying a new cartridge is simpler and more reliable than refilling.