Connect your HP printer to WiFi through the printer's control panel, your router settings, or the HP Smart app — the method depends on your printer model and what information you have available
Most HP printers connect to WiFi in one of three ways: using the printer's built-in touchscreen or buttons, entering your network details through a web browser, or using the HP Smart app on your phone or computer. The fastest route for most people is the printer's control panel if your model has one. If your printer has no screen, you will use either the app or a browser. All three methods require your WiFi network name (SSID) and password.
Before you start, make sure your printer is powered on and within range of your router — typically 30 to 50 feet in an open room, less through walls. Have your WiFi password ready. If you do not know your password, you can find it on a sticker on your router or reset it through your router's admin page.
Key Takeaways
- HP printers with a touchscreen can connect to WiFi directly through the Settings or Network menu without needing a computer or phone.
- The HP Smart app works on any HP printer and guides you through connection step by step, making it the easiest method for most people.
- If your printer has no screen and the app does not work, you can connect through a web browser by typing your printer's IP address into the address bar.
- Once connected, your printer will remember your WiFi network and reconnect automatically when powered on, as long as the network remains in range.
- If connection fails, restart both your printer and router, move the printer closer to the router, and check that you entered your password correctly.
Using the printer's control panel or touchscreen
If your HP printer has a touchscreen or a row of buttons on the front, this is usually the fastest method. Look for a Settings, Network, or WiFi button on the control panel. On most models, you will find this under Settings or a gear icon.
Once you open the network settings, select "Wireless" or "WiFi" and choose "Setup Wizard" or "Connect to Network." The printer will scan for available networks and show you a list. Find your network name in the list and select it. When prompted, use the printer's keypad or touchscreen to enter your WiFi password. The printer will attempt to connect and display a confirmation message when successful.
If your printer has physical buttons instead of a touchscreen, the process is similar but slower — you will navigate using arrow buttons and confirm with an OK button. Refer to your printer's manual for the exact button sequence, as this varies by model.
Connecting through the HP Smart app
The HP Smart app works on phones, tablets, and computers and is often the most straightforward method, especially if your printer has no touchscreen. read the app from the Apple App Store, Google Play, or the HP website depending on your device.
Open the app and select "Add a printer." The app will search for printers on your network. When it finds your printer, select it and follow the on-screen prompts. The app will ask for your WiFi network name and password. Enter these details and the app will send them to your printer. The connection usually completes within 30 seconds.
If the app does not find your printer, make sure your phone or computer is connected to the same WiFi network as the printer. If your printer is brand new or has been reset, it may be in setup mode and broadcasting its own temporary network — the app will guide you through connecting to that first, then to your main network.
Connecting through a web browser
This method works when the control panel is not available and the app does not find your printer. You will need your printer's IP address, which you can find by printing a network configuration page directly from the printer.
To print a network configuration page, hold down the WiFi or Information button on your printer for three to five seconds until the printer beeps or displays a message. The printer will print a page showing its current network status and IP address — it looks like a series of numbers separated by periods, such as 192.168.1.100.
On any computer or phone connected to the same WiFi network, open a web browser and type the IP address into the address bar. Press Enter. This will open your printer's web interface. Look for a Network, WiFi, or Wireless Settings option. Select "Setup Wizard" or "Connect to Network," choose your network name from the list, enter your password, and select Connect. The printer will restart and reconnect to your network.
What to do if your printer will not connect
If your printer fails to connect, the most common causes are an incorrect password, the printer being out of range, or interference from other devices. Start by restarting both your printer and your router — turn them off, wait 30 seconds, and turn them back on. This clears temporary connection errors.
Move your printer closer to your router, ideally within 15 feet and with a clear line of sight. Walls, metal objects, and microwave ovens can block WiFi signals. If you are using a 5 GHz network, try switching to 2.4 GHz instead — older HP printers often connect more reliably to 2.4 GHz. You can usually switch this in your router settings or by creating a separate network name for 2.4 GHz.
Double-check your WiFi password by looking at the sticker on your router or logging into your router's admin page. Passwords are case-sensitive, so make sure Caps Lock is off. If you have recently changed your password, the printer will still be trying to use the old one — you will need to forget the network and reconnect with the new password.
Forgetting and reconnecting to a network
If your printer is connected to an old network or you need to change networks, you can remove the saved connection and start fresh. On the printer's control panel, go to Settings, then Network or WiFi Settings. Look for "Forget Network," "Remove Network," or "Forget This Network." Select your network name and confirm the deletion.
Once removed, follow the connection steps for your printer type — control panel, app, or web browser — and reconnect to the network. The printer will treat it as a new connection and ask for your password again.
Checking your connection and printing a test page
Once your printer shows a connected status, verify the connection by printing a test page. On the control panel, navigate to Settings, then Network or Information, and look for "Print Network Configuration" or "Print Test Page." This page will show your printer's IP address, network name, and connection status.
If the page prints successfully, your printer is connected and ready to use. From your computer or phone, you should now be able to print to this printer over WiFi without any cables. On Windows, go to Settings, Devices, Printers and Scanners, and select "Add a printer." On Mac, go to System Preferences, Printers and Scanners, and click the plus button. Both will search for your printer on the network.
Frequently Asked Questions
Can I connect my HP printer to WiFi if I do not know my network password?
You can find your WiFi password on a sticker attached to your router, usually on the bottom or back. If the sticker is missing or unreadable, log into your router's admin page by typing your router's IP address (usually 192.168.1.1) into a web browser. You will need your router's admin username and password, which may also be on the sticker or in your router's manual.
Why does my printer keep disconnecting from WiFi?
Printers disconnect when they move out of range, when the router restarts, or when the WiFi signal is weak. Move the printer closer to your router and away from obstacles. If disconnections happen frequently, restart your router and check that your printer's firmware is up to date through the HP Smart app or your printer's web interface.
Can I connect my HP printer to a 5 GHz WiFi network?
Many newer HP printers support 5 GHz, but older models only work with 2.4 GHz. Check your printer's manual or specifications online. If your printer does not support 5 GHz, ask your router to broadcast a separate 2.4 GHz network, or disable 5 GHz temporarily during setup.
What if the HP Smart app cannot find my printer?
Make sure your phone or computer is on the same WiFi network as the printer. If the printer is brand new, it may be in setup mode and broadcasting its own network — the app will prompt you to connect to that first. If the app still cannot find it, use the web browser method with your printer's IP address instead.
Do I need to reconnect my printer to WiFi every time I turn it on?
No. Once connected, your printer saves your network name and password and reconnects automatically when powered on. You only need to reconnect manually if you change networks, reset the printer, or forget the network through the settings menu.