How to connect your HP printer to WiFi
Most HP wireless printers connect to your home network in one of three ways: using the printer's built-in touchscreen menu, using HP's Smart app on your phone, or using a temporary USB cable to set up the connection. The method depends on which HP model you own and whether the printer has a display screen. The fastest route for most people is the Smart app, which walks you through each step and shows you exactly what to do.
Before you start, gather three pieces of information: your WiFi network name (the one you see when you look for networks on your phone), your WiFi password, and the printer's model number (printed on the front or back of the machine). You will also need to make sure your printer and the device you are using to set it up are both powered on and within range of your router.
Key Takeaways
- HP printers with a touchscreen can connect to WiFi directly from the printer's menu without needing a computer or phone.
- The HP Smart app on your phone or computer is the most reliable method for most models and shows you each step in real time.
- You will need your WiFi network name and password before you begin, and the printer must be powered on and within 30 feet of your router.
- If your printer has no screen and the app does not find it, a temporary USB cable connection can set up WiFi for the first time.
- After setup, you can print wirelessly from any device on the same network without needing the cable again.
Using the HP Smart app on your phone or computer
read the HP Smart app from the Apple App Store, Google Play Store, or HP's website (hp.com/us/en/software/smart-app). Open the app and tap the plus sign or "Add printer" button. The app will search for printers on your network and show you a list of devices it finds.
When your printer appears in the list, tap it to select it. The app will ask you to enter your WiFi network name and password. Type these exactly as they appear — capitalization and spacing matter. After you enter them, the app will send this information to the printer and confirm the connection. This usually takes 30 seconds to two minutes. Once connected, you can close the app; the printer stays connected to your WiFi until you manually disconnect it or change your network password.
If the app does not find your printer, make sure both devices are on the same WiFi network. If your router broadcasts two networks (one labeled 2.4GHz and one labeled 5GHz), try connecting the printer to the 2.4GHz network first — older HP models sometimes have trouble with 5GHz. Restart the printer by turning it off for 30 seconds, then turn it back on and try again.
Connecting directly from the printer's touchscreen menu
If your HP printer has a display screen on the front, you can set up WiFi without using a phone or computer. Press the home button or menu button on the printer's screen. Look for an option labeled "Settings," "Network," or "Wireless" — the exact name varies by model.
Select "Wireless" or "WiFi" from the menu. The printer will show you a list of available networks. Find your network name in the list and tap it. When prompted, enter your WiFi password using the on-screen keyboard. The printer will confirm the connection and return to the home screen. Write down the IP address shown on the screen if you plan to print from a computer later — you may need it for troubleshooting.
If you do not see your network in the list, your router may be too far away or the signal may be weak. Move the printer closer to the router and try again. If your network name does not appear even when you are close to the router, check whether your router is broadcasting the network name (called SSID broadcast). Some routers hide the network name for security; if yours does, you will need to enter the name manually instead of selecting it from the list.
Using a USB cable for first-time setup
If your printer has no touchscreen and the HP Smart app cannot find it, connect the printer to your computer with a USB cable temporarily. This method works for older HP models or printers that have never been connected to a network before.
Plug the USB cable into the printer and into an available USB port on your computer. Your computer will recognize the printer and may automatically install drivers. Open the HP Smart app on your computer and follow the prompts to set up the WiFi connection. When the app asks for your network name and password, enter them exactly as they appear. The app will send this information through the USB cable to the printer's memory.
Once the connection is confirmed, you can unplug the USB cable. The printer will now connect to your WiFi network on its own each time you turn it on. You do not need the cable again unless you need to reset the printer or change your network password.
What to do if the printer will not connect
If your printer connects to WiFi but then loses the connection, the most common cause is that your router and printer are too far apart or there is interference from walls or other devices. Move the printer within 30 feet of your router and away from microwaves, cordless phones, or baby monitors, which broadcast on the same frequency as WiFi. Restart both the printer and your router by turning them off for 30 seconds, then turning them back on.
If the printer connects but you cannot print from your computer or phone, check that all devices are on the same WiFi network. Open your phone's WiFi settings and confirm you are connected to the same network name as the printer. On your computer, go to Settings (Windows) or System Preferences (Mac) and verify the network connection. If devices are on different networks, connect them to the same one.
If the printer shows a WiFi symbol but says "no connection" or "offline," the password may have been entered incorrectly. Go back into the printer's network settings and re-enter your WiFi password. Pay close attention to capital letters, numbers, and special characters — a single mistake will prevent connection. If you are not sure of your password, check your router's label (usually on the back or bottom) or log into your router's settings page from a computer to view or reset the password.
Printing after your printer is connected to WiFi
Once your printer is connected to your WiFi network, you can print from any device on that network without needing a cable. On your phone or tablet, open the document or photo you want to print, tap the share or menu button, and look for a print option. Select your HP printer from the list of available printers and choose how many copies you want. The print job will send wirelessly to the printer.
On a Windows computer, open the document, press Ctrl+P to open the print dialog, and select your HP printer from the list. On a Mac, press Command+P and do the same. If your printer does not appear in the list, make sure it is powered on and connected to WiFi. Restart the print service on your computer by restarting the device itself, then try printing again.
If you move your printer to a different room or your WiFi network changes, you will need to set up the connection again using one of the methods above. The printer does not automatically reconnect to a new network — you must enter the new password through the app, the touchscreen menu, or the USB cable method.
Frequently Asked Questions
Do I need to install software on my computer to print wirelessly?
No. Once the printer is connected to your WiFi network, most computers and phones will find it automatically. You can print without installing anything. However, installing the full HP printer driver from hp.com gives you access to advanced features like double-sided printing and custom paper sizes, so it is worth doing if you plan to print often.
Can I connect my HP printer to a guest WiFi network?
Most HP printers can connect to a guest network, but your devices must also be on that same guest network to print. If your router separates the guest network from your main network, devices on the main network will not see the printer. Check your router's settings to see whether guest devices can communicate with each other.
What if I forgot my WiFi password?
You can view your WiFi password by logging into your router's settings page from a computer on the network. Open a browser, type 192.168.1.1 or 192.168.0.1 in the address bar, and log in with your router's username and password (usually printed on the router itself). Look for a wireless or network settings page to find your password. Alternatively, restart your router to reset it to factory settings, which will erase your current password and network name.
Will my printer stay connected if I restart my router?
Yes. The printer stores your WiFi network name and password in its memory, so it will automatically reconnect to the network when the router comes back online. This usually happens within one to two minutes of the router restarting.
Can I connect the printer to WiFi if my network name has special characters or spaces?
Yes. Enter the network name exactly as it appears, including spaces and special characters. Make sure you are typing it correctly — even a single character out of place will prevent connection. If you are using the printer's touchscreen keyboard, take your time and double-check each character before confirming.