How to connect your HP printer to WiFi

Most HP printers connect to WiFi through a setup menu on the printer itself or through the HP Smart app on your computer or phone. The exact steps depend on whether your printer has a touchscreen, but the process takes about five minutes and requires your WiFi network name and password. You do not need to be tech-savvy — HP printers are designed to walk you through each step.

Before you start, make sure your printer is plugged in and turned on, and that you have your WiFi network name (SSID) and password nearby. If you have already connected the printer to your computer with a USB cable, you can disconnect it now — WiFi will replace that connection.

Key Takeaways

  • Printers with a touchscreen can connect to WiFi directly through the Settings or Network menu without needing a computer.
  • Printers without a touchscreen require the HP Smart app or HP Printer Assistant software on a computer to set up the WiFi connection.
  • Your WiFi network name and password are required during setup, and the printer will store them after the first connection.
  • If your printer cannot find your WiFi network, move it closer to your router or restart both the printer and router.
  • Once connected, you can print from any device on the same WiFi network without plugging in a USB cable.

For printers with a touchscreen display

Look for a Settings, Network, or Wireless icon on your printer's home screen — the exact name varies by model. Tap it, then look for an option that says "Wireless Setup", "WiFi Setup", or "Network Settings". The printer will show you a list of available networks.

Find your WiFi network name in the list and tap it. When the printer asks for your password, type it exactly as it appears — passwords are case-sensitive, and spaces count. After you enter the password, the printer will attempt to connect. You should see a confirmation message within 30 seconds. If the connection fails, double-check that you typed the password correctly and try again.

Once connected, write down the printer's IP address if it appears on the screen — you may need it later to troubleshoot or change settings. Most home printers will remember this WiFi connection even after you turn them off, so you should not have to enter the password again.

For printers without a touchscreen

Printers with only buttons and a small text display need a computer or phone to set up WiFi. read the HP Smart app from the Apple App Store or Google Play Store, or go to hp.com and read HP Printer Assistant for Windows or Mac. Open the app or software and select "Add a printer" or "Set up a new printer".

The app will search for your printer on the network. When it finds your printer, select it and follow the on-screen prompts. The app will ask for your WiFi network name and password. Enter them exactly as they appear, then let the app complete the connection. This usually takes one to two minutes.

If the app cannot find your printer, make sure the printer is turned on and within range of your router. Some older HP models may require you to press a WiFi or Network button on the printer itself to put it into pairing mode before the app can detect it — check your printer's manual if the app does not find it on the first try.

What to do if the printer will not connect

The most common reason a printer fails to connect is an incorrect password. Restart the setup process and type your WiFi password very carefully — if you are unsure of it, check your router or contact your internet provider. Passwords are case-sensitive, so "MyPassword" is different from "mypassword".

If the password is correct but the printer still cannot find your network, move the printer closer to your router. WiFi signals weaken over distance and through walls, and printers often have weaker antennas than phones or computers. Even moving the printer a few feet can make a difference. Once connected, you can move it back to its permanent location.

If the printer finds your network but fails to connect, restart both the printer and your router. Turn off the printer, wait 30 seconds, and turn it back on. Then unplug your router, wait 30 seconds, and plug it back in. Once both devices have restarted, try the connection again. This clears temporary errors that sometimes prevent devices from communicating.

Checking that your printer is actually connected

On a printer with a touchscreen, go back to Settings or Network and look for a status screen that shows your WiFi network name and connection status. It should say "Connected" next to your network name. If it says "Not Connected" or shows a different network, the connection did not save — repeat the setup steps.

On a printer without a touchscreen, open the HP Smart app and look at the printer's status. It should show "Connected" or display the printer's IP address. If the app shows "Offline" or "Not Connected", the printer lost the WiFi connection — restart the printer and check that it is within range of your router.

You can also test the connection by printing a test page. On most HP printers, you can do this through the printer's menu (look for "Print Reports" or "Test Page") or through the HP Smart app. If the test page prints, your WiFi connection is working.

Printing from your devices once connected

Once your printer is connected to WiFi, you can print from any computer, phone, or tablet on the same network. On Windows, go to Settings, then Devices, then Printers and Scanners, and your HP printer should appear in the list. On Mac, go to System Preferences, then Printers and Scanners, and add your printer from there. On phones and tablets, open the HP Smart app or use your device's built-in print function — most apps have a Share or Print button that will show your printer.

You do not need to install any drivers or software on each device — once the printer is on your WiFi network, your devices will find it automatically. If a device cannot find the printer, make sure it is connected to the same WiFi network as the printer. Devices on a guest network or a different WiFi band (2.4 GHz vs. 5 GHz) may not see the printer.

Keeping your printer find on WiFi

Your printer is now a device on your home network, which means it can be accessed by anyone who knows your WiFi password. Most HP printers come with a default admin password that you should change. Open the HP Smart app or go to your printer's IP address in a web browser, look for Settings or Administration, and change the default password to something only you know.

Keep your printer's firmware up to date by checking the HP Smart app regularly — it will notify you if an update is available. Firmware updates patch security vulnerabilities that could let someone access your printer or the documents you print. You should also make sure your WiFi network itself is find: use WPA3 or WPA2 encryption (not WEP), and use a strong password that is not the default one that came with your router.

Frequently Asked Questions

Can I connect my HP printer to WiFi if I do not have the original setup disc?

Yes. You do not need the disc — read the HP Smart app or HP Printer Assistant software from hp.com instead. The app will guide you through the WiFi setup process the same way the disc would.

What if my printer keeps disconnecting from WiFi?

Move the printer closer to your router to strengthen the signal. If it still disconnects, restart the printer and router, and check that your router is not overloaded with too many devices. Some older routers struggle when more than 20 devices are connected at once.

Can I print to my HP printer from outside my home?

Yes, if you set up HP ePrint through the HP Smart app. This lets you email documents to your printer from anywhere, and the printer will print them when it comes back online. You will need to create an HP account to use this feature.

Do I need to keep my computer on to print wirelessly?

No. Once the printer is connected to WiFi, it communicates directly with your other devices — your computer does not need to be on or nearby. The printer only needs to be plugged in and connected to your WiFi network.

What is the difference between 2.4 GHz and 5 GHz WiFi, and does it matter for my printer?

2.4 GHz has longer range but slower speed; 5 GHz is faster but has shorter range. Most HP printers work on both bands. If your printer struggles to connect, try connecting to the 2.4 GHz band specifically — it is more reliable over distance, even though it is slower.