Your monitor goes black when the cable is loose, the input is wrong, the computer went to sleep, or the monitor itself needs power

A black screen usually means one of four things: the monitor is not getting a signal from your computer, the monitor is not getting power, your computer went to sleep, or you are looking at the wrong input. Most of the time you can fix it in under a minute by checking the cable connections and pressing a button. If none of those work, the problem is usually something you can diagnose by trying things in order.

The fastest way to narrow it down is to look for lights on the monitor itself. If the power light is on (usually a small LED on the front or bottom), the monitor has power and the problem is the signal. If there is no light at all, the monitor is not getting power.

Key Takeaways

  • Check that the cable running from your computer to the monitor is plugged in firmly at both ends, because loose connections are the most common cause.
  • Make sure you are looking at the correct input on the monitor — HDMI, DisplayPort, VGA, or DVI — by pressing the input button on the monitor itself.
  • If the monitor power light is off, check that the power cable is plugged into both the monitor and the wall outlet, and try a different outlet.
  • Press a key or move the mouse to wake your computer from sleep mode, which can look identical to a black screen.
  • If the monitor light is on but the screen stays black after trying these steps, the video cable itself may be damaged.

Check the cable between your computer and monitor

The video cable — whether it is HDMI, DisplayPort, VGA, or DVI — can come loose from vibration, being bumped, or straightforward not being pushed in all the way when it was first connected. Unplug the cable from both the monitor and the computer, wait five seconds, and plug it back in firmly. You should hear or feel a small click when it seats properly. Do this even if the cable looks like it is already plugged in.

If you have a desktop computer, also check that the cable is plugged into the graphics card or motherboard port on the back of the tower, not into a USB port or audio port by mistake. The video port is usually blue (for VGA), white or gold (for DVI), black (for HDMI), or has a small symbol that looks like a monitor. If you are not sure which port is which, look at the label printed on the back of the computer or check the manual that came with it.

Switch to the correct input on the monitor

Most monitors can accept a signal from more than one type of cable at the same time. If you plugged the cable into an HDMI port but the monitor is set to look at the DisplayPort input, you will see a black screen even though everything is connected correctly. Look for a button on the monitor labeled "Input", "Source", or "Select" — usually on the front or side of the monitor frame. Press it and use the arrow buttons to cycle through the available inputs until you see a picture.

Some monitors show a small menu on the screen when you press the input button. Others cycle through inputs silently. If you see text on the screen that says "No Signal" or "Input Not Found", that is actually a good sign — it means the monitor has power and is trying to find the right input. Keep pressing the input button until the picture appears.

Verify the monitor has power

Look at the monitor itself for a small light, usually on the bottom front or the back. If the light is on (often green or blue), the monitor has power. If there is no light at all, the monitor is not getting electricity. Check that the power cable is plugged into the back of the monitor and into a working wall outlet. Try plugging a lamp or phone charger into the same outlet to confirm the outlet itself works.

If the outlet works but the monitor still has no light, try a different outlet in a different room. If the monitor lights up in the new outlet, the first outlet may be controlled by a switch or may be on a circuit that has tripped. If the monitor still has no light in a second outlet, the monitor's power supply may have failed and you may need to replace the monitor.

Wake your computer from sleep mode

If the monitor light is on but the screen is black, your computer may have gone to sleep. Press any key on the keyboard or move the mouse. If the computer wakes up, the problem was sleep mode. If nothing happens, the computer itself may not be getting power or may have crashed.

Check that the computer tower or laptop is powered on. On a desktop, look for a power button light or listen for fan noise. On a laptop, look for a light on the keyboard or try pressing the power button. If the computer is on but still not responding, hold the power button for ten seconds to force it to shut down, then turn it back on.

Test the video cable by swapping it

If the monitor has power, the input is set correctly, and your computer is awake, the video cable itself may be damaged. If you have a second monitor or a TV with the same type of input (HDMI, DisplayPort, or VGA), plug your computer into it using the same cable. If the picture appears on the second screen, the cable is fine and the problem is with your monitor. If the second screen also stays black, the cable is damaged and needs to be replaced.

Video cables are inexpensive — usually between five and twenty dollars depending on the type and length. You can buy them at any electronics store or online. Make sure you buy the same type as the one you are replacing: HDMI, DisplayPort, VGA, or DVI.

Check for a loose internal connection inside the monitor

If you have tried everything above and the monitor still shows a black screen, there may be a loose connection inside the monitor itself. This is rare, but it can happen if the monitor was dropped or bumped hard. Unplug the monitor from power for thirty seconds, then plug it back in. Sometimes this resets the internal electronics enough to restore the picture.

If that does not work, the monitor may have a hardware failure inside that requires professional repair or replacement. At this point, it is usually cheaper to buy a new monitor than to repair an old one, especially if the monitor is more than five years old.

Frequently Asked Questions

Why does my monitor go black but I can still hear sound from my computer?

This usually means the video signal is not reaching the monitor, but your computer is still running. Check the video cable connection and make sure the monitor input is set correctly. The computer is working fine — only the picture is missing.

My monitor shows "No Signal" on the screen. Is that better or worse than a completely black screen?

That is actually better. "No Signal" means the monitor has power and is looking for a video input. You just need to find the right cable or input setting. A completely black screen could mean the monitor has no power at all.

Can I use any HDMI cable, or do I need a special one?

Any HDMI cable works with any HDMI port. You do not need a special cable or an expensive one. A basic HDMI cable from any store will work the same as a premium one for monitor connections.

What if my monitor goes black only sometimes, not all the time?

An intermittent black screen usually means a loose cable connection. Unplug the video cable from both ends, inspect it for bent pins or damage, and plug it back in firmly. If the problem continues, the cable may be failing and should be replaced.

Does a black screen mean my monitor is broken?

Not usually. Most black screens are caused by loose cables or wrong input settings, which take less than a minute to fix. Only if the monitor has no power light and does not respond to anything should you assume it is broken.